LEM 1423 User manual
Keys Denition
MEM S/S Button: In Cook mode, Press the MEM button mode
to enable the option to adjust quick temperature settings.
Press again to save selection. In Timer mode, press the S/S
button to begin the count-down or count-up timer. Press the
S/S button to pause or restart the timer. When the countdown
timer hits 0:00 press the S/S button to silence the unit.
DIGITAL thermometer
LEM Products • West Chester, OH 45011 •877-536-7763 • lemproducts.com
1 YEAR
WARRANTY
Up Arrow/ HR Button: Press the up arrow to select food types
while in quick temperature setting. Press the up arrow to set
your desired cooking temperature while in manual
temperature setting. Press the HR button to set hours while in
timer mode. To clear time, press the HR and MIN buttons at
the same time.
Down Arrow/ MIN Button: Press the down arrow to select
food while in quick temperature settings. Press the down
arrow to set your desired cooking temperature while in the
manual temperature setting. Press the MIN button to set
minutes in timer mode. To clear time, press the HR and MIN
buttons at the same time.
Mode Selector: Move the position of the selector to select
cook mode, timer mode or power of the device.
Features and Specications
• Programmable alert with preset temperatures for
specic foods.
• 99- hour, 59- minutes countdown timer and count up
timer.
• Stainless steel temperature probe with silicon cord.
• Temperature range of probe: 32 °F to 572 °F (0°C to 300°C)
• Temperature reading in °F or °C.
• Flip-out counter top stand and magnet.
• Uses one AAA Battery (included).
Important Notes/Warnings
• This product is not for use in microwave ovens.
• Keep out of reach of children.
• Do not touch hot probe or wire with bare hands. Always
wear a heat-resistant glove.
• Do not expose probe directly to ame. Doing so will cause
wire deterioration.
• When not in use, slide the mode selector switch to the
o-position O to conserve the battery.
• The probe should not be exposed to oven temperatures
exceeding 716°F (380°C).
• Do not let probe or cable come into direct contact with
the oven elements, as this will result in faulty readings
and/or damage.
• If the temperature exceeds or falls below the measurable
ranges, the LCD screen will display on HHH or LLL.
Operating Instructions
• Clean the probe with hot soapy water and rinse. Do not
submerge the probe and cable in water.
• Silicon cord should be free of knots and freely insert into
the socket. If probe is knotted or not fully installed display
will show LLL.
• Slide the switch on the back to display temperature
reading in F° or C°.
• Slide the mode selector switch to the cook position.
• You will see two temperatures on the LCD display. On the
left is the actual temperature reading as measured by
temperature probe and on the right is the set
temperature. The default reading is 212°F.
• Set your desired cooking temperature by choosing quick
Temperature Setting or manual Temperature Setting.
• Insert the tip of the probe at least 2” into the thickest part
of the meat, but not near bone or gristle.
• Place food into the oven. Before closing the oven door,
make sure there is enough slack in the cable to prevent
the probe form being pulled out of the food when the
oven door is closed. The base unit must be positioned
outside of the oven on a stable surface.
USE & MAINTENANCE
1423
• To prevent damage to the unit, do not place on a
hot surface.
• When the internal temperature reached temperature set
temperature and alert will sound. To stop the alert, slide
the mode selector to O or disconnect the temperature
probe from the base an alarm will stop within 30 seconds.
• Before removing the food from the oven, disconnect the
cable from the base unit. Do not touch probe or cord with
bare hands during or just after cooking. Always wear
heat-resistant glove.
Quick Temperature Settings
Your digital cooking thermometer is programmed with
presets temperatures for various cooking levels:
Follow these steps:
• Press the MEM button.
• Press “ ” or “ ” to select your food type.
• Press MEM to conrm and lock in the setting.
Note: You can make manual adjustments to the present
temperatures by pressing “ ” or “ ”. Press and hold the
button for fast setting.
Manual Temperature Setting
• For manual setting, press “ ” or “ ” to set your desire
cooking temperature.
Countdown Timer
Your countdown timer can be used whether the
thermometer is in operation or not.
• Slide the mode selector to the timer position.
• Press HR to set the hours and MIN to set the minutes.
• Press S/S (start/stop) to start the countdown timer. The
colon between hours and minutes will ash.
• When the timer gets to 0:00, the alarm will sound. Press
S/S to silence the alarm.
• To clear the time, press the HR and MIN buttons at the
same time. You can pause the timer while it is running by
pressing S/S. Press S/S again to restart the timer.
• If you are using the timer and thermometer at the same
time, you may slide the selector switch back to the cook
position during the timing session to view the cooking
temperatures. The timer will continue to countdown.
Count Up Timer
• In Timer mode, when it displays 00:00, press MEM/S/S
button to start count up timer. Press it again to pause the
timer. The timer will stop when it is reaching 99 Hour: 59
minutes.
CLEANING AND CARE
• Unit is not waterproof. Do not expose plug of probe or
plug in hole to any liquid, which will result in a bad
connection and faulty readings.• The probe and cable are
not dishwasher safe. They must be hand washed using
hot soapy water. Make sure to rinse and dry probe
thoroughly before storing.
• Do not submerge the base unit in water or expose to any
corrosive cleaning material. Wipe the damp cloth.
Down Arrow/ MIN Button
LCD Screen
Temperature Probe Socket
Battery Compartment
Flip-out Counter Top Stand
˚F or ˚C Selector
Mode Selector
Magnet
ME M/S/ S
/H R
/M IN
MEM S/S Button
Up Arrow/HR Button
Keys Denition
MEM S/S Button: In Cook mode, Press the MEM button mode
to enable the option to adjust quick temperature settings.
Press again to save selection. In Timer mode, press the S/S
button to begin the count-down or count-up timer. Press the
S/S button to pause or restart the timer. When the countdown
timer hits 0:00 press the S/S button to silence the unit.
DIGITAL thermometer
LEM Products • West Chester, OH 45011 •877-536-7763 • lemproducts.com
1 YEAR
WARRANTY
Up Arrow/ HR Button: Press the up arrow to select food types
while in quick temperature setting. Press the up arrow to set
your desired cooking temperature while in manual
temperature setting. Press the HR button to set hours while in
timer mode. To clear time, press the HR and MIN buttons at
the same time.
Down Arrow/ MIN Button: Press the down arrow to select
food while in quick temperature settings. Press the down
arrow to set your desired cooking temperature while in the
manual temperature setting. Press the MIN button to set
minutes in timer mode. To clear time, press the HR and MIN
buttons at the same time.
Mode Selector: Move the position of the selector to select
cook mode, timer mode or power of the device.
Features and Specications
• Programmable alert with preset temperatures for
specic foods.
• 99- hour, 59- minutes countdown timer and count up
timer.
• Stainless steel temperature probe with silicon cord.
• Temperature range of probe: 32 °F to 572 °F (0°C to 300°C)
• Temperature reading in °F or °C.
• Flip-out counter top stand and magnet.
• Uses one AAA Battery (included).
Important Notes/Warnings
• This product is not for use in microwave ovens.
• Keep out of reach of children.
• Do not touch hot probe or wire with bare hands. Always
wear a heat-resistant glove.
• Do not expose probe directly to ame. Doing so will cause
wire deterioration.
• When not in use, slide the mode selector switch to the
o-position O to conserve the battery.
• The probe should not be exposed to oven temperatures
exceeding 716°F (380°C).
• Do not let probe or cable come into direct contact with
the oven elements, as this will result in faulty readings
and/or damage.
• If the temperature exceeds or falls below the measurable
ranges, the LCD screen will display on HHH or LLL.
Operating Instructions
• Clean the probe with hot soapy water and rinse. Do not
submerge the probe and cable in water.
• Silicon cord should be free of knots and freely insert into
the socket. If probe is knotted or not fully installed display
will show LLL.
• Slide the switch on the back to display temperature
reading in F° or C°.
• Slide the mode selector switch to the cook position.
• You will see two temperatures on the LCD display. On the
left is the actual temperature reading as measured by
temperature probe and on the right is the set
temperature. The default reading is 212°F.
• Set your desired cooking temperature by choosing quick
Temperature Setting or manual Temperature Setting.
• Insert the tip of the probe at least 2” into the thickest part
of the meat, but not near bone or gristle.
• Place food into the oven. Before closing the oven door,
make sure there is enough slack in the cable to prevent
the probe form being pulled out of the food when the
oven door is closed. The base unit must be positioned
outside of the oven on a stable surface.
USE & MAINTENANCE
1423
• To prevent damage to the unit, do not place on a
hot surface.
• When the internal temperature reached temperature set
temperature and alert will sound. To stop the alert, slide
the mode selector to O or disconnect the temperature
probe from the base an alarm will stop within 30 seconds.
• Before removing the food from the oven, disconnect the
cable from the base unit. Do not touch probe or cord with
bare hands during or just after cooking. Always wear
heat-resistant glove.
Quick Temperature Settings
Your digital cooking thermometer is programmed with
presets temperatures for various cooking levels:
Follow these steps:
• Press the MEM button.
• Press “ ” or “ ” to select your food type.
• Press MEM to conrm and lock in the setting.
Note: You can make manual adjustments to the present
temperatures by pressing “ ” or “ ”. Press and hold the
button for fast setting.
Manual Temperature Setting
• For manual setting, press “ ” or “ ” to set your desire
cooking temperature.
Countdown Timer
Your countdown timer can be used whether the
thermometer is in operation or not.
• Slide the mode selector to the timer position.
• Press HR to set the hours and MIN to set the minutes.
• Press S/S (start/stop) to start the countdown timer. The
colon between hours and minutes will ash.
• When the timer gets to 0:00, the alarm will sound. Press
S/S to silence the alarm.
• To clear the time, press the HR and MIN buttons at the
same time. You can pause the timer while it is running by
pressing S/S. Press S/S again to restart the timer.
• If you are using the timer and thermometer at the same
time, you may slide the selector switch back to the cook
position during the timing session to view the cooking
temperatures. The timer will continue to countdown.
Count Up Timer
• In Timer mode, when it displays 00:00, press MEM/S/S
button to start count up timer. Press it again to pause the
timer. The timer will stop when it is reaching 99 Hour: 59
minutes.
CLEANING AND CARE
• Unit is not waterproof. Do not expose plug of probe or
plug in hole to any liquid, which will result in a bad
connection and faulty readings.• The probe and cable are
not dishwasher safe. They must be hand washed using
hot soapy water. Make sure to rinse and dry probe
thoroughly before storing.
• Do not submerge the base unit in water or expose to any
corrosive cleaning material. Wipe the damp cloth.
Down Arrow/ MIN Button
LCD Screen
Temperature Probe Socket
Battery Compartment
Flip-out Counter Top Stand
˚F or ˚C Selector
Mode Selector
Magnet
ME M/S/ S
/H R
/M IN
MEM S/S Button
Up Arrow/HR Button
Keys Denition
MEM S/S Button: In Cook mode, Press the MEM button mode
to enable the option to adjust quick temperature settings.
Press again to save selection. In Timer mode, press the S/S
button to begin the count-down or count-up timer. Press the
S/S button to pause or restart the timer. When the countdown
timer hits 0:00 press the S/S button to silence the unit.
DIGITAL thermometer
LEM Products • West Chester, OH 45011 •877-536-7763 • lemproducts.com
1 YEAR
WARRANTY
Up Arrow/ HR Button: Press the up arrow to select food types
while in quick temperature setting. Press the up arrow to set
your desired cooking temperature while in manual
temperature setting. Press the HR button to set hours while in
timer mode. To clear time, press the HR and MIN buttons at
the same time.
Down Arrow/ MIN Button: Press the down arrow to select
food while in quick temperature settings. Press the down
arrow to set your desired cooking temperature while in the
manual temperature setting. Press the MIN button to set
minutes in timer mode. To clear time, press the HR and MIN
buttons at the same time.
Mode Selector: Move the position of the selector to select
cook mode, timer mode or power of the device.
Features and Specications
• Programmable alert with preset temperatures for
specic foods.
• 99- hour, 59- minutes countdown timer and count up
timer.
• Stainless steel temperature probe with silicon cord.
• Temperature range of probe: 32 °F to 572 °F (0°C to 300°C)
• Temperature reading in °F or °C.
• Flip-out counter top stand and magnet.
• Uses one AAA Battery (included).
Important Notes/Warnings
• This product is not for use in microwave ovens.
• Keep out of reach of children.
• Do not touch hot probe or wire with bare hands. Always
wear a heat-resistant glove.
• Do not expose probe directly to ame. Doing so will cause
wire deterioration.
• When not in use, slide the mode selector switch to the
o-position O to conserve the battery.
• The probe should not be exposed to oven temperatures
exceeding 716°F (380°C).
• Do not let probe or cable come into direct contact with
the oven elements, as this will result in faulty readings
and/or damage.
• If the temperature exceeds or falls below the measurable
ranges, the LCD screen will display on HHH or LLL.
Operating Instructions
• Clean the probe with hot soapy water and rinse. Do not
submerge the probe and cable in water.
• Silicon cord should be free of knots and freely insert into
the socket. If probe is knotted or not fully installed display
will show LLL.
• Slide the switch on the back to display temperature
reading in F° or C°.
• Slide the mode selector switch to the cook position.
• You will see two temperatures on the LCD display. On the
left is the actual temperature reading as measured by
temperature probe and on the right is the set
temperature. The default reading is 212°F.
• Set your desired cooking temperature by choosing quick
Temperature Setting or manual Temperature Setting.
• Insert the tip of the probe at least 2” into the thickest part
of the meat, but not near bone or gristle.
• Place food into the oven. Before closing the oven door,
make sure there is enough slack in the cable to prevent
the probe form being pulled out of the food when the
oven door is closed. The base unit must be positioned
outside of the oven on a stable surface.
USE & MAINTENANCE
1423
• To prevent damage to the unit, do not place on a
hot surface.
• When the internal temperature reached temperature set
temperature and alert will sound. To stop the alert, slide
the mode selector to O or disconnect the temperature
probe from the base an alarm will stop within 30 seconds.
• Before removing the food from the oven, disconnect the
cable from the base unit. Do not touch probe or cord with
bare hands during or just after cooking. Always wear
heat-resistant glove.
Quick Temperature Settings
Your digital cooking thermometer is programmed with
presets temperatures for various cooking levels:
Follow these steps:
• Press the MEM button.
• Press “ ” or “ ” to select your food type.
• Press MEM to conrm and lock in the setting.
Note: You can make manual adjustments to the present
temperatures by pressing “ ” or “ ”. Press and hold the
button for fast setting.
Manual Temperature Setting
• For manual setting, press “ ” or “ ” to set your desire
cooking temperature.
Countdown Timer
Your countdown timer can be used whether the
thermometer is in operation or not.
• Slide the mode selector to the timer position.
• Press HR to set the hours and MIN to set the minutes.
• Press S/S (start/stop) to start the countdown timer. The
colon between hours and minutes will ash.
• When the timer gets to 0:00, the alarm will sound. Press
S/S to silence the alarm.
• To clear the time, press the HR and MIN buttons at the
same time. You can pause the timer while it is running by
pressing S/S. Press S/S again to restart the timer.
• If you are using the timer and thermometer at the same
time, you may slide the selector switch back to the cook
position during the timing session to view the cooking
temperatures. The timer will continue to countdown.
Count Up Timer
• In Timer mode, when it displays 00:00, press MEM/S/S
button to start count up timer. Press it again to pause the
timer. The timer will stop when it is reaching 99 Hour: 59
minutes.
CLEANING AND CARE
• Unit is not waterproof. Do not expose plug of probe or
plug in hole to any liquid, which will result in a bad
connection and faulty readings.• The probe and cable are
not dishwasher safe. They must be hand washed using
hot soapy water. Make sure to rinse and dry probe
thoroughly before storing.
• Do not submerge the base unit in water or expose to any
corrosive cleaning material. Wipe the damp cloth.
Down Arrow/ MIN Button
LCD Screen
Temperature Probe Socket
Battery Compartment
Flip-out Counter Top Stand
˚F or ˚C Selector
Mode Selector
Magnet
ME M/S/ S
/H R
/M IN
MEM S/S Button
Up Arrow/HR Button
Keys Denition
MEM S/S Button: In Cook mode, Press the MEM button mode
to enable the option to adjust quick temperature settings.
Press again to save selection. In Timer mode, press the S/S
button to begin the count-down or count-up timer. Press the
S/S button to pause or restart the timer. When the countdown
timer hits 0:00 press the S/S button to silence the unit.
DIGITAL thermometer
LEM Products • West Chester, OH 45011 •877-536-7763 • lemproducts.com
1 YEAR
WARRANTY
Up Arrow/ HR Button: Press the up arrow to select food types
while in quick temperature setting. Press the up arrow to set
your desired cooking temperature while in manual
temperature setting. Press the HR button to set hours while in
timer mode. To clear time, press the HR and MIN buttons at
the same time.
Down Arrow/ MIN Button: Press the down arrow to select
food while in quick temperature settings. Press the down
arrow to set your desired cooking temperature while in the
manual temperature setting. Press the MIN button to set
minutes in timer mode. To clear time, press the HR and MIN
buttons at the same time.
Mode Selector: Move the position of the selector to select
cook mode, timer mode or power of the device.
Features and Specications
• Programmable alert with preset temperatures for
specic foods.
• 99- hour, 59- minutes countdown timer and count up
timer.
• Stainless steel temperature probe with silicon cord.
• Temperature range of probe: 32 °F to 572 °F (0°C to 300°C)
• Temperature reading in °F or °C.
• Flip-out counter top stand and magnet.
• Uses one AAA Battery (included).
Important Notes/Warnings
• This product is not for use in microwave ovens.
• Keep out of reach of children.
• Do not touch hot probe or wire with bare hands. Always
wear a heat-resistant glove.
• Do not expose probe directly to ame. Doing so will cause
wire deterioration.
• When not in use, slide the mode selector switch to the
o-position O to conserve the battery.
• The probe should not be exposed to oven temperatures
exceeding 716°F (380°C).
• Do not let probe or cable come into direct contact with
the oven elements, as this will result in faulty readings
and/or damage.
• If the temperature exceeds or falls below the measurable
ranges, the LCD screen will display on HHH or LLL.
Operating Instructions
• Clean the probe with hot soapy water and rinse. Do not
submerge the probe and cable in water.
• Silicon cord should be free of knots and freely insert into
the socket. If probe is knotted or not fully installed display
will show LLL.
• Slide the switch on the back to display temperature
reading in F° or C°.
• Slide the mode selector switch to the cook position.
• You will see two temperatures on the LCD display. On the
left is the actual temperature reading as measured by
temperature probe and on the right is the set
temperature. The default reading is 212°F.
• Set your desired cooking temperature by choosing quick
Temperature Setting or manual Temperature Setting.
• Insert the tip of the probe at least 2” into the thickest part
of the meat, but not near bone or gristle.
• Place food into the oven. Before closing the oven door,
make sure there is enough slack in the cable to prevent
the probe form being pulled out of the food when the
oven door is closed. The base unit must be positioned
outside of the oven on a stable surface.
USE & MAINTENANCE
1423
• To prevent damage to the unit, do not place on a
hot surface.
• When the internal temperature reached temperature set
temperature and alert will sound. To stop the alert, slide
the mode selector to O or disconnect the temperature
probe from the base an alarm will stop within 30 seconds.
• Before removing the food from the oven, disconnect the
cable from the base unit. Do not touch probe or cord with
bare hands during or just after cooking. Always wear
heat-resistant glove.
Quick Temperature Settings
Your digital cooking thermometer is programmed with
presets temperatures for various cooking levels:
Follow these steps:
• Press the MEM button.
• Press “ ” or “ ” to select your food type.
• Press MEM to conrm and lock in the setting.
Note: You can make manual adjustments to the present
temperatures by pressing “ ” or “ ”. Press and hold the
button for fast setting.
Manual Temperature Setting
• For manual setting, press “ ” or “ ” to set your desire
cooking temperature.
Countdown Timer
Your countdown timer can be used whether the
thermometer is in operation or not.
• Slide the mode selector to the timer position.
• Press HR to set the hours and MIN to set the minutes.
• Press S/S (start/stop) to start the countdown timer. The
colon between hours and minutes will ash.
• When the timer gets to 0:00, the alarm will sound. Press
S/S to silence the alarm.
• To clear the time, press the HR and MIN buttons at the
same time. You can pause the timer while it is running by
pressing S/S. Press S/S again to restart the timer.
• If you are using the timer and thermometer at the same
time, you may slide the selector switch back to the cook
position during the timing session to view the cooking
temperatures. The timer will continue to countdown.
Count Up Timer
• In Timer mode, when it displays 00:00, press MEM/S/S
button to start count up timer. Press it again to pause the
timer. The timer will stop when it is reaching 99 Hour: 59
minutes.
CLEANING AND CARE
• Unit is not waterproof. Do not expose plug of probe or
plug in hole to any liquid, which will result in a bad
connection and faulty readings.• The probe and cable are
not dishwasher safe. They must be hand washed using
hot soapy water. Make sure to rinse and dry probe
thoroughly before storing.
• Do not submerge the base unit in water or expose to any
corrosive cleaning material. Wipe the damp cloth.
Down Arrow/ MIN Button
LCD Screen
Temperature Probe Socket
Battery Compartment
Flip-out Counter Top Stand
˚F or ˚C Selector
Mode Selector
Magnet
ME M/S/ S
/H R
/M IN
MEM S/S Button
Up Arrow/HR Button
Keys Denition
MEM S/S Button: In Cook mode, Press the MEM button mode
to enable the option to adjust quick temperature settings.
Press again to save selection. In Timer mode, press the S/S
button to begin the count-down or count-up timer. Press the
S/S button to pause or restart the timer. When the countdown
timer hits 0:00 press the S/S button to silence the unit.
Up Arrow/ HR Button: Press the up arrow to select food types
while in quick temperature setting. Press the up arrow to set
your desired cooking temperature while in manual
temperature setting. Press the HR button to set hours while in
timer mode. To clear time, press the HR and MIN buttons at
the same time.
Down Arrow/ MIN Button: Press the down arrow to select
food while in quick temperature settings. Press the down
arrow to set your desired cooking temperature while in the
manual temperature setting. Press the MIN button to set
minutes in timer mode. To clear time, press the HR and MIN
buttons at the same time.
Mode Selector: Move the position of the selector to select
cook mode, timer mode or power of the device.
Features and Specications
• Programmable alert with preset temperatures for
specic foods.
• 99- hour, 59- minutes countdown timer and count up
timer.
• Stainless steel temperature probe with silicon cord.
• Temperature range of probe: 32 °F to 572 °F (0°C to 300°C)
• Temperature reading in °F or °C.
• Flip-out counter top stand and magnet.
• Uses one AAA Battery (included).
Important Notes/Warnings
• This product is not for use in microwave ovens.
• Keep out of reach of children.
• Do not touch hot probe or wire with bare hands. Always
wear a heat-resistant glove.
• Do not expose probe directly to ame. Doing so will cause
wire deterioration.
• When not in use, slide the mode selector switch to the
o-position O to conserve the battery.
• The probe should not be exposed to oven temperatures
exceeding 716°F (380°C).
• Do not let probe or cable come into direct contact with
the oven elements, as this will result in faulty readings
and/or damage.
• If the temperature exceeds or falls below the measurable
ranges, the LCD screen will display on HHH or LLL.
Operating Instructions
• Clean the probe with hot soapy water and rinse. Do not
submerge the probe and cable in water.
• Silicon cord should be free of knots and freely insert into
the socket. If probe is knotted or not fully installed display
will show LLL.
• Slide the switch on the back to display temperature
reading in F° or C°.
• Slide the mode selector switch to the cook position.
• You will see two temperatures on the LCD display. On the
left is the actual temperature reading as measured by
temperature probe and on the right is the set
temperature. The default reading is 212°F.
• Set your desired cooking temperature by choosing quick
Temperature Setting or manual Temperature Setting.
• Insert the tip of the probe at least 2” into the thickest part
of the meat, but not near bone or gristle.
• Place food into the oven. Before closing the oven door,
make sure there is enough slack in the cable to prevent
the probe form being pulled out of the food when the
oven door is closed. The base unit must be positioned
outside of the oven on a stable surface.
• To prevent damage to the unit, do not place on a
hot surface.
• When the internal temperature reached temperature set
temperature and alert will sound. To stop the alert, slide
the mode selector to O or disconnect the temperature
probe from the base an alarm will stop within 30 seconds.
• Before removing the food from the oven, disconnect the
cable from the base unit. Do not touch probe or cord with
bare hands during or just after cooking. Always wear
heat-resistant glove.
Quick Temperature Settings
Your digital cooking thermometer is programmed with
presets temperatures for various cooking levels:
Follow these steps:
• Press the MEM button.
• Press “ ” or “ ” to select your food type.
• Press MEM to conrm and lock in the setting.
Note: You can make manual adjustments to the present
temperatures by pressing “ ” or “ ”. Press and hold the
button for fast setting.
Manual Temperature Setting
• For manual setting, press “ ” or “ ” to set your desire
cooking temperature.
Countdown Timer
Your countdown timer can be used whether the
thermometer is in operation or not.
• Slide the mode selector to the timer position.
• Press HR to set the hours and MIN to set the minutes.
• Press S/S (start/stop) to start the countdown timer. The
colon between hours and minutes will ash.
• When the timer gets to 0:00, the alarm will sound. Press
S/S to silence the alarm.
• To clear the time, press the HR and MIN buttons at the
same time. You can pause the timer while it is running by
pressing S/S. Press S/S again to restart the timer.
• If you are using the timer and thermometer at the same
time, you may slide the selector switch back to the cook
position during the timing session to view the cooking
temperatures. The timer will continue to countdown.
Count Up Timer
• In Timer mode, when it displays 00:00, press MEM/S/S
button to start count up timer. Press it again to pause the
timer. The timer will stop when it is reaching 99 Hour: 59
minutes.
CLEANING AND CARE
• Unit is not waterproof. Do not expose plug of probe or
plug in hole to any liquid, which will result in a bad
connection and faulty readings.• The probe and cable are
not dishwasher safe. They must be hand washed using
hot soapy water. Make sure to rinse and dry probe
thoroughly before storing.
• Do not submerge the base unit in water or expose to any
corrosive cleaning material. Wipe the damp cloth.
LEM Products • West Chester, OH 45011 •877-536-7763 • lemproducts.com
ATTENTION:
If any components of this unit are broken,
or if the unit does not operate properly,
please contact LEM Products at
877-536-7763
For more great products or a free catalog
log onto lemproducts.com
Keys Denition
MEM S/S Button: In Cook mode, Press the MEM button mode
to enable the option to adjust quick temperature settings.
Press again to save selection. In Timer mode, press the S/S
button to begin the count-down or count-up timer. Press the
S/S button to pause or restart the timer. When the countdown
timer hits 0:00 press the S/S button to silence the unit.
Up Arrow/ HR Button: Press the up arrow to select food types
while in quick temperature setting. Press the up arrow to set
your desired cooking temperature while in manual
temperature setting. Press the HR button to set hours while in
timer mode. To clear time, press the HR and MIN buttons at
the same time.
Down Arrow/ MIN Button: Press the down arrow to select
food while in quick temperature settings. Press the down
arrow to set your desired cooking temperature while in the
manual temperature setting. Press the MIN button to set
minutes in timer mode. To clear time, press the HR and MIN
buttons at the same time.
Mode Selector: Move the position of the selector to select
cook mode, timer mode or power of the device.
Features and Specications
• Programmable alert with preset temperatures for
specic foods.
• 99- hour, 59- minutes countdown timer and count up
timer.
• Stainless steel temperature probe with silicon cord.
• Temperature range of probe: 32 °F to 572 °F (0°C to 300°C)
• Temperature reading in °F or °C.
• Flip-out counter top stand and magnet.
• Uses one AAA Battery (included).
Important Notes/Warnings
• This product is not for use in microwave ovens.
• Keep out of reach of children.
• Do not touch hot probe or wire with bare hands. Always
wear a heat-resistant glove.
• Do not expose probe directly to ame. Doing so will cause
wire deterioration.
• When not in use, slide the mode selector switch to the
o-position O to conserve the battery.
• The probe should not be exposed to oven temperatures
exceeding 716°F (380°C).
• Do not let probe or cable come into direct contact with
the oven elements, as this will result in faulty readings
and/or damage.
• If the temperature exceeds or falls below the measurable
ranges, the LCD screen will display on HHH or LLL.
Operating Instructions
• Clean the probe with hot soapy water and rinse. Do not
submerge the probe and cable in water.
• Silicon cord should be free of knots and freely insert into
the socket. If probe is knotted or not fully installed display
will show LLL.
• Slide the switch on the back to display temperature
reading in F° or C°.
• Slide the mode selector switch to the cook position.
• You will see two temperatures on the LCD display. On the
left is the actual temperature reading as measured by
temperature probe and on the right is the set
temperature. The default reading is 212°F.
• Set your desired cooking temperature by choosing quick
Temperature Setting or manual Temperature Setting.
• Insert the tip of the probe at least 2” into the thickest part
of the meat, but not near bone or gristle.
• Place food into the oven. Before closing the oven door,
make sure there is enough slack in the cable to prevent
the probe form being pulled out of the food when the
oven door is closed. The base unit must be positioned
outside of the oven on a stable surface.
• To prevent damage to the unit, do not place on a
hot surface.
• When the internal temperature reached temperature set
temperature and alert will sound. To stop the alert, slide
the mode selector to O or disconnect the temperature
probe from the base an alarm will stop within 30 seconds.
• Before removing the food from the oven, disconnect the
cable from the base unit. Do not touch probe or cord with
bare hands during or just after cooking. Always wear
heat-resistant glove.
Quick Temperature Settings
Your digital cooking thermometer is programmed with
presets temperatures for various cooking levels:
Follow these steps:
• Press the MEM button.
• Press “ ” or “ ” to select your food type.
• Press MEM to conrm and lock in the setting.
Note: You can make manual adjustments to the present
temperatures by pressing “ ” or “ ”. Press and hold the
button for fast setting.
Manual Temperature Setting
• For manual setting, press “ ” or “ ” to set your desire
cooking temperature.
Countdown Timer
Your countdown timer can be used whether the
thermometer is in operation or not.
• Slide the mode selector to the timer position.
• Press HR to set the hours and MIN to set the minutes.
• Press S/S (start/stop) to start the countdown timer. The
colon between hours and minutes will ash.
• When the timer gets to 0:00, the alarm will sound. Press
S/S to silence the alarm.
• To clear the time, press the HR and MIN buttons at the
same time. You can pause the timer while it is running by
pressing S/S. Press S/S again to restart the timer.
• If you are using the timer and thermometer at the same
time, you may slide the selector switch back to the cook
position during the timing session to view the cooking
temperatures. The timer will continue to countdown.
Count Up Timer
• In Timer mode, when it displays 00:00, press MEM/S/S
button to start count up timer. Press it again to pause the
timer. The timer will stop when it is reaching 99 Hour: 59
minutes.
CLEANING AND CARE
• Unit is not waterproof. Do not expose plug of probe or
plug in hole to any liquid, which will result in a bad
connection and faulty readings.• The probe and cable are
not dishwasher safe. They must be hand washed using
hot soapy water. Make sure to rinse and dry probe
thoroughly before storing.
• Do not submerge the base unit in water or expose to any
corrosive cleaning material. Wipe the damp cloth.
LEM Products • West Chester, OH 45011 •877-536-7763 • lemproducts.com
ATTENTION:
If any components of this unit are broken,
or if the unit does not operate properly,
please contact LEM Products at
877-536-7763
For more great products or a free catalog
log onto lemproducts.com
Keys Denition
MEM S/S Button: In Cook mode, Press the MEM button mode
to enable the option to adjust quick temperature settings.
Press again to save selection. In Timer mode, press the S/S
button to begin the count-down or count-up timer. Press the
S/S button to pause or restart the timer. When the countdown
timer hits 0:00 press the S/S button to silence the unit.
Up Arrow/ HR Button: Press the up arrow to select food types
while in quick temperature setting. Press the up arrow to set
your desired cooking temperature while in manual
temperature setting. Press the HR button to set hours while in
timer mode. To clear time, press the HR and MIN buttons at
the same time.
Down Arrow/ MIN Button: Press the down arrow to select
food while in quick temperature settings. Press the down
arrow to set your desired cooking temperature while in the
manual temperature setting. Press the MIN button to set
minutes in timer mode. To clear time, press the HR and MIN
buttons at the same time.
Mode Selector: Move the position of the selector to select
cook mode, timer mode or power of the device.
Features and Specications
• Programmable alert with preset temperatures for
specic foods.
• 99- hour, 59- minutes countdown timer and count up
timer.
• Stainless steel temperature probe with silicon cord.
• Temperature range of probe: 32 °F to 572 °F (0°C to 300°C)
• Temperature reading in °F or °C.
• Flip-out counter top stand and magnet.
• Uses one AAA Battery (included).
Important Notes/Warnings
• This product is not for use in microwave ovens.
• Keep out of reach of children.
• Do not touch hot probe or wire with bare hands. Always
wear a heat-resistant glove.
• Do not expose probe directly to ame. Doing so will cause
wire deterioration.
• When not in use, slide the mode selector switch to the
o-position O to conserve the battery.
• The probe should not be exposed to oven temperatures
exceeding 716°F (380°C).
• Do not let probe or cable come into direct contact with
the oven elements, as this will result in faulty readings
and/or damage.
• If the temperature exceeds or falls below the measurable
ranges, the LCD screen will display on HHH or LLL.
Operating Instructions
• Clean the probe with hot soapy water and rinse. Do not
submerge the probe and cable in water.
• Silicon cord should be free of knots and freely insert into
the socket. If probe is knotted or not fully installed display
will show LLL.
• Slide the switch on the back to display temperature
reading in F° or C°.
• Slide the mode selector switch to the cook position.
• You will see two temperatures on the LCD display. On the
left is the actual temperature reading as measured by
temperature probe and on the right is the set
temperature. The default reading is 212°F.
• Set your desired cooking temperature by choosing quick
Temperature Setting or manual Temperature Setting.
• Insert the tip of the probe at least 2” into the thickest part
of the meat, but not near bone or gristle.
• Place food into the oven. Before closing the oven door,
make sure there is enough slack in the cable to prevent
the probe form being pulled out of the food when the
oven door is closed. The base unit must be positioned
outside of the oven on a stable surface.
• To prevent damage to the unit, do not place on a
hot surface.
• When the internal temperature reached temperature set
temperature and alert will sound. To stop the alert, slide
the mode selector to O or disconnect the temperature
probe from the base an alarm will stop within 30 seconds.
• Before removing the food from the oven, disconnect the
cable from the base unit. Do not touch probe or cord with
bare hands during or just after cooking. Always wear
heat-resistant glove.
Quick Temperature Settings
Your digital cooking thermometer is programmed with
presets temperatures for various cooking levels:
Follow these steps:
• Press the MEM button.
• Press “ ” or “ ” to select your food type.
• Press MEM to conrm and lock in the setting.
Note: You can make manual adjustments to the present
temperatures by pressing “ ” or “ ”. Press and hold the
button for fast setting.
Manual Temperature Setting
• For manual setting, press “ ” or “ ” to set your desire
cooking temperature.
Countdown Timer
Your countdown timer can be used whether the
thermometer is in operation or not.
• Slide the mode selector to the timer position.
• Press HR to set the hours and MIN to set the minutes.
• Press S/S (start/stop) to start the countdown timer. The
colon between hours and minutes will ash.
• When the timer gets to 0:00, the alarm will sound. Press
S/S to silence the alarm.
• To clear the time, press the HR and MIN buttons at the
same time. You can pause the timer while it is running by
pressing S/S. Press S/S again to restart the timer.
• If you are using the timer and thermometer at the same
time, you may slide the selector switch back to the cook
position during the timing session to view the cooking
temperatures. The timer will continue to countdown.
Count Up Timer
• In Timer mode, when it displays 00:00, press MEM/S/S
button to start count up timer. Press it again to pause the
timer. The timer will stop when it is reaching 99 Hour: 59
minutes.
CLEANING AND CARE
• Unit is not waterproof. Do not expose plug of probe or
plug in hole to any liquid, which will result in a bad
connection and faulty readings.• The probe and cable are
not dishwasher safe. They must be hand washed using
hot soapy water. Make sure to rinse and dry probe
thoroughly before storing.
• Do not submerge the base unit in water or expose to any
corrosive cleaning material. Wipe the damp cloth.
LEM Products • West Chester, OH 45011 •877-536-7763 • lemproducts.com
ATTENTION:
If any components of this unit are broken,
or if the unit does not operate properly,
please contact LEM Products at
877-536-7763
For more great products or a free catalog
log onto lemproducts.com
Keys Denition
MEM S/S Button: In Cook mode, Press the MEM button mode
to enable the option to adjust quick temperature settings.
Press again to save selection. In Timer mode, press the S/S
button to begin the count-down or count-up timer. Press the
S/S button to pause or restart the timer. When the countdown
timer hits 0:00 press the S/S button to silence the unit.
Up Arrow/ HR Button: Press the up arrow to select food types
while in quick temperature setting. Press the up arrow to set
your desired cooking temperature while in manual
temperature setting. Press the HR button to set hours while in
timer mode. To clear time, press the HR and MIN buttons at
the same time.
Down Arrow/ MIN Button: Press the down arrow to select
food while in quick temperature settings. Press the down
arrow to set your desired cooking temperature while in the
manual temperature setting. Press the MIN button to set
minutes in timer mode. To clear time, press the HR and MIN
buttons at the same time.
Mode Selector: Move the position of the selector to select
cook mode, timer mode or power of the device.
Features and Specications
• Programmable alert with preset temperatures for
specic foods.
• 99- hour, 59- minutes countdown timer and count up
timer.
• Stainless steel temperature probe with silicon cord.
• Temperature range of probe: 32 °F to 572 °F (0°C to 300°C)
• Temperature reading in °F or °C.
• Flip-out counter top stand and magnet.
• Uses one AAA Battery (included).
Important Notes/Warnings
• This product is not for use in microwave ovens.
• Keep out of reach of children.
• Do not touch hot probe or wire with bare hands. Always
wear a heat-resistant glove.
• Do not expose probe directly to ame. Doing so will cause
wire deterioration.
• When not in use, slide the mode selector switch to the
o-position O to conserve the battery.
• The probe should not be exposed to oven temperatures
exceeding 716°F (380°C).
• Do not let probe or cable come into direct contact with
the oven elements, as this will result in faulty readings
and/or damage.
• If the temperature exceeds or falls below the measurable
ranges, the LCD screen will display on HHH or LLL.
Operating Instructions
• Clean the probe with hot soapy water and rinse. Do not
submerge the probe and cable in water.
• Silicon cord should be free of knots and freely insert into
the socket. If probe is knotted or not fully installed display
will show LLL.
• Slide the switch on the back to display temperature
reading in F° or C°.
• Slide the mode selector switch to the cook position.
• You will see two temperatures on the LCD display. On the
left is the actual temperature reading as measured by
temperature probe and on the right is the set
temperature. The default reading is 212°F.
• Set your desired cooking temperature by choosing quick
Temperature Setting or manual Temperature Setting.
• Insert the tip of the probe at least 2” into the thickest part
of the meat, but not near bone or gristle.
• Place food into the oven. Before closing the oven door,
make sure there is enough slack in the cable to prevent
the probe form being pulled out of the food when the
oven door is closed. The base unit must be positioned
outside of the oven on a stable surface.
• To prevent damage to the unit, do not place on a
hot surface.
• When the internal temperature reached temperature set
temperature and alert will sound. To stop the alert, slide
the mode selector to O or disconnect the temperature
probe from the base an alarm will stop within 30 seconds.
• Before removing the food from the oven, disconnect the
cable from the base unit. Do not touch probe or cord with
bare hands during or just after cooking. Always wear
heat-resistant glove.
Quick Temperature Settings
Your digital cooking thermometer is programmed with
presets temperatures for various cooking levels:
Follow these steps:
• Press the MEM button.
• Press “ ” or “ ” to select your food type.
• Press MEM to conrm and lock in the setting.
Note: You can make manual adjustments to the present
temperatures by pressing “ ” or “ ”. Press and hold the
button for fast setting.
Manual Temperature Setting
• For manual setting, press “ ” or “ ” to set your desire
cooking temperature.
Countdown Timer
Your countdown timer can be used whether the
thermometer is in operation or not.
• Slide the mode selector to the timer position.
• Press HR to set the hours and MIN to set the minutes.
• Press S/S (start/stop) to start the countdown timer. The
colon between hours and minutes will ash.
• When the timer gets to 0:00, the alarm will sound. Press
S/S to silence the alarm.
• To clear the time, press the HR and MIN buttons at the
same time. You can pause the timer while it is running by
pressing S/S. Press S/S again to restart the timer.
• If you are using the timer and thermometer at the same
time, you may slide the selector switch back to the cook
position during the timing session to view the cooking
temperatures. The timer will continue to countdown.
Count Up Timer
• In Timer mode, when it displays 00:00, press MEM/S/S
button to start count up timer. Press it again to pause the
timer. The timer will stop when it is reaching 99 Hour: 59
minutes.
CLEANING AND CARE
• Unit is not waterproof. Do not expose plug of probe or
plug in hole to any liquid, which will result in a bad
connection and faulty readings.• The probe and cable are
not dishwasher safe. They must be hand washed using
hot soapy water. Make sure to rinse and dry probe
thoroughly before storing.
• Do not submerge the base unit in water or expose to any
corrosive cleaning material. Wipe the damp cloth.
LEM Products • West Chester, OH 45011 •877-536-7763 • lemproducts.com
ATTENTION:
If any components of this unit are broken,
or if the unit does not operate properly,
please contact LEM Products at
877-536-7763
For more great products or a free catalog
log onto lemproducts.com
Table of contents
