Lemco Core Trainer Advanced User manual

EN 0.91
USER MANUAL
LEMCO
Core Trainer
Advanced

2 3
INTRODUCTION
Safety always comes rst
Always read and follow the instructions before you start using your core
trainer.
Read, understand and rehearse the safety and instructions for use.
Get approval from your doctor before you start training, especially if you are
above 25 years old or have hearth problems or if you are short of breath.
People with handicap or disabilities need doctors approval before starting
using the Core Trainer, and needs supervision during the use, extensive intro-
duction from a professional physiotherapist who can also advise about warm-
ing up before the training. They can tailor an individual program for each user.
Please understand the limits of usage of the trainer, before you start using it.
Do not disassemble, modify or open the trainer. It can damage the saddle,
make the product not functioning as intended and / or injury people.
If you have diculties in using the product after having read this introduction,
please contact LEMCO Rehab & Fysio for assistance.
Only use the LEMCO Core Trainer Advanced as described.
Never use the LEMCO Core Trainer Advanced if it feels wrong
Warranty is void if the product is used for other purposes than described.
Disposal of the LEMCO Core Trainer Advanced must be done according to
local and national laws.
Place the saddle on an even surface. Contact LEMCO if the saddle rocks on
the oor due to uneven oor.
At least one meter free space to every side of the saddle is needed for safe
use.
SAFETY INFORMATION
Congratulations with your LEMCO Core Trainer
The LEMCO Core Trainer electric horse riding machine has been devel-
oped for people who are getting benets from handicap horse riding
therapy, and who are searching for a solution to supplement the training
at home or therapy.
I sincerely hope that you will have great benet of the machine and it will fulll
you need of training, functionality, Quality and usability.
You are responsible for the training, we believe we have developed an unique
way of training for a lot of people who would not realize the benets of horse
riding and experience physical fatigue.
I will appreciate if you would be kind to share your experiences by writing to
me.
It is important for us to read about our customers experiences with the
LEMCO Core Trainer, and your comments can inspire other people to choose
this smart way of exercising at home or Physiotherapy School, and help us in
our continued development of the Core Trainer .
Feel free to call me or e-mail me: [phone]
Best regards
Carsten Lemche,
[email protected]
Owner. LEMCO REHAB & FYSIO

4 5
Train with clothes that is loose.
Please be attendant to your breathing while using the product.
Do not overtrain Start slowly and increase speed later.
If you feel dizzy, sick, breast pain or other abnormal symptoms, stop training
immediatley and consult a doctor.
Do not use the saddle with children below 15 years without supervision
The LEMCO Core Trainer must only be serviced by lemco.
Do not block the rotation of the saddle or actively work against the movement
as this might damage the product.
If the product behaves oddly, please remove the power and call LEMCO
Use of the Core Trainer for other purpose than described in this manual may
damage the product.
When using the handle for balance, do not draw too much in the handle.
If the user weights more than 100 kg, the machine might stop as a part of the
machines safety. The backlit in the display blinks and the riding movement
stops. If this happens, press the ON / OFF button to stop the alarm.
When the saddle is not in use, please turn o the unit on the display.
Avoid mouth water, sweat and liquids in the display, use a towel over the
display in case of users mouth water.
SAFETY-INSTRUCTION INSTALLATION
TRAINING
1. Always get advice from a doctor or therapist in how you get the best ben-
et out of your training with LEMCO Core Trainer.
2. On our website you will soon nd tips and tricks and video of how people
use the saddle.
1. Do not use the saddle outdoor or in humid locations
2. Place the saddle on an even surface
3. Avoid direct sunlight, as the product may fade or the saddle can dry out.
4. Use the anti vibration feet to reduce risk of marks on the oor. That will also
reduce noise from the LEMCO Core Trainer.
1. Use the built in wheels when moving instead of lifting the saddle in the
handle.
2. Start slowly if you are not used to the riding movements.
3. Remember to warm up before training, As well as not to overdo the train-
ing.
4. Remove any sharp objects from your pockets before start using the
machine.
5. Do not plug in the machine with wet hands.
IN USE

6 7
Rider Mode: Standard riding mode.
A basic movement , the saddle moves gently back
and forth and sidewards.
Circle Mode: Rotating and gentle movements.
3D Mode: Combination of standard movmenet and 3D
movements.
Provides an unique and very effective training.
THREE BUILT IN MOVEMENTS ELECTRICAL INFORMATION & MODEL INFORMATION
Model: LEMCO Core Trainer Advanced
Model: EQ900L
Power: 220v-240v / 50 Hz
Power use: Max 190 Watt
Weight: 42 kg
Size: 450*880*820
Color: Sort
Training time: 15 min
Max Weight: 100 kg
On our website you will soon nd information and examples of use of the
LEMCO Core Trainer for institutions and schools / kinder gardens.
EXTRA INFORMATION
Play with balloons and balls while sitting on the saddle. Exercising when also
having fun and interacting with the therapist is easy.
Throw balls in a basket, or play with the therapist.
EXERCISE AND HAVE FUN AT THE SAME TIME

Train - Without motor ...
90% Choose
LEMCO Combi
Bike Plus
Experience the
joy of moving .
even if you think
you needed a
motor !
Easy to read
display with
backlit.
Easy xation
of
the hands
From
Wheelchair
LEMCO REHAB & FYSIO APS
Fabriksvej 3
DK-3000 Helsingør
Tlf.: [phone]
Fax: [phone]
[email protected]
www.lemco.dk
And get a satised training
!