1. Front View
2. Right View
1) AV IN JACK: This jack used toconnect a external CVBSvideo and analog audio input.
2) AV OUT JACK: This jack outputs CVBSvideo and analog audiosignal.
) EARPHONE JACK: This jack outputs analogaudio L/R signal toearphone.
) POWER SWITCH: This switch used toswitch on/off the system.
) DC IN JACK: This is used forAC-DC adaptor input, thevoltage range is 12V.
) CHARGE INDICATOR: The system is incharging state when redLED is lighting, itwill turn
into green when fullcharged.
3
4
5
6
Panel illustration
6
13
16
14 15 16 17
1) SOURCE: To selectinput source.
2) SETUP:Used to adjust thebrightness/contrast/color/hue parameter of TFTscreen when there isno menu on the
screen.
3) CH+: Move around the menuscreens or selecting thechannels in non-menu state.
4) OK: Confirm a selection withina menu.
5) VOL-:Move around the menuscreens or changing thevolume in non-menu state.
6) VOL+: Move around the menuscreens or changing thevolume in non-menu state.
7) CH-: Move around the menuscreens or selecting thechannels in non-menu state.
8) ASPECT:To changepicture aspect.
9) MENU:Open the main menuwindow.
10) EXIT:Exit menu.
11) REMOTE CONTROL SENSOR:Receive the signal fromthe remote control
12) TFT screen:Display the TFT widescreendisplay.
13) Antenna input:Connect to an externalRF signal.
14) Speaker Left:The left speaker.
17) Speaker Right:The right speaker.
15) USB
16) Memory Card slot
10
9
1
2
3
4
5
6
7
8
11 12
123456
