Lenovo Legion Y530 User manual

Lenovo Legion Y530
Legion Y530-15ICH
User Guide
Read the safety notices and important tips in the
included manuals before using your computer.

Notes
•Before using the product, be sure to read Lenovo Safety and General Information Guide first.
•The latest electronic compliance and environmental information are available from the
Lenovo compliance information Web sites.
- To view compliance information go to: hp://www.lenovo.com/compliance
-
To download environmental information go to: hp://www.lenovo.com/ecodeclaration
•Some instructions in this guide may assume that you are using Windows®10. If you are
using another Windows operating system, some operations may be slightly different. If
you are using other operating systems, some operations may not apply to you.
•The features described in this guide are common to most models. Some features may not
be available on your computer or your computer may include features that are not
described in this user guide.
•The illustrations in this manual may differ from the actual product. Please refer to the
actual product.
Regulatory Notice
•For details, refer to Guides & Manuals at hp://support.lenovo.com.
First Edition (March 2018)
© Copyright Lenovo 2018.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General
Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set
forth in Contract No. GS-35F-05925.

i
Contents
Chapter 1. Getting to know your computer .................................................................................... 1
Top view
......................................................................................................................................................... 1
Left-side view
................................................................................................................................................ 5
Right-side view
.............................................................................................................................................. 6
Rear view
........................................................................................................................................................ 7
Bottom view
................................................................................................................................................. 11
Chapter 2. Starting to use Windows 10......................................................................................... 12
Configuring the operating system for the first time
.............................................................................. 12
Operating system interface
........................................................................................................................ 12
Putting the computer to sleep or shutting it down
................................................................................ 14
Task and desktop management
................................................................................................................ 16
Connecting to a wireless network
............................................................................................................ 17
Chapter 3. Recovery system .......................................................................................................... 18
Reset this PC
................................................................................................................................................ 18
Chapter 4. Troubleshooting............................................................................................................ 19
Frequently asked questions
....................................................................................................................... 19
Troubleshooting
.......................................................................................................................................... 21
Trademarks...................................................................................................................................... 25

1
Chapter 1. Getting to know your computer
Top view ------------------------------------------------------------------------------------------
Note: The dashed areas indicate parts that are not visible externally.
Attention:
•Do not open the display panel beyond 180 degrees. When closing the display panel, be careful not to leave
pens or any other objects in between the display panel and the keyboard. Otherwise, the display panel
may be damaged.

2
Chapter 1. Getting to know your computer
Computer display Provides brilliant visual output.
Integrated camera Use the camera for video communication or taking photos.
Built-in microphone Captures sound which can be used for video conferencing, voice
narration, or audio recording.
Power button Press this button to turn on the computer.
Numeric keypad For details, see “Using the keyboard” on page 3.
Wireless LAN antennas Connect to a wireless LAN adapter to send and receive wireless radio
signals.
Touchpad The touchpad functions as a conventional mouse.
Touchpad: To move the pointer on the screen, slide your fingertip over
the pad in the direction in which you want the pointer to move.
Touchpad butto ns: The functions of the left/right side correspond to that
of the left/right mouse button on a conventional mouse.
Note: You can enable/disable the touchpad by pressing Fn + F11.

Chapter 1. Getting to know your computer
3
Using the keyboard
Numeric keypad
The keyboard has a separate numeric keypad. To enable or disable the numeric keypad, press
the Num Lock key.
Function key combinations
Through the use of the function keys, you can change operational features instantly. To use this
function, press and hold Fn ; then press one of the function keys .

4
Chapter 1. Getting to know your computer
The following describes the features of each function key.
Fn + F1: Mutes/unmutes the sound.
Fn + F2: Decreases the volume level.
Fn + F3: Increases the volume level.
Fn + F4: Enables/disables the microphone.
Fn + F5: Decreases the display brightness.
Fn + F6: Increases the display brightness.
Fn + F7: Toggles the display between the computer and an external
device.
Fn + F8: Enables/disables Airplane mode.
Fn + F9: Opens the Settings interface.
Fn + F10: Enables/disables the integrated camera.
Fn + F11: Enables/disables the touchpad.
Fn + F12: Activates the insert function.
Fn + B: Activates the break function.
Fn + P: Activates the pause function.
Fn + K: Enables/disables the scroll lock.
Fn + S: Activates the system request.
Fn + :Activates the Pgup key function.
Fn + :Activates the Pgdn key function.
Fn + :Activates the home key function.
Fn + :Activates the end key function.
Fn + Space: Adjusts the keyboard backlight (off dim bright off).

Chapter 1. Getting to know your computer
5
Left-side view --------------------------------------------------------------------------------
Ventilation slots Dissipate internal heat.
Note: Make sure that the ventilation slots are not blocked or else the computer may overheat.
USB 3.1 port Connects to USB devices.
Note: For details, see “Connecting USB device” on page 9.
Combo audio jack Connects to headsets.
Notes:
•The combo audio jack does not support conventional microphones.
•The recording function might not be supported if third-party headphones or headsets are connected,
due to different industry standards.

6
Chapter 1. Getting to know your computer
Right-side view -----------------------------------------------------------------------------
USB 3.1 port Connects to USB devices.
Note: For details, see “Connecting USB device” on page 9.
Novo button When the computer is off, press this button to start the recovery system
or the BIOS setup utility, or to enter the boot menu.
Notes:
•You can use the tip of an unfolded paper clip (or similar object without a sharp tip) to gently press the
Novo button.
•For details, see “Recovery system” on page 18.
Power status indicator
Indicator Indicator status Meaning
Power status
indicator
On (solid white) The computer is turned on and the battery has between 20%
and 100% charge.
Fast blinking white The computer is turned on and the battery has between 1%
and 20% charge.
Slow blinking white The computer is in sleep mode or the computer display lid is
closed.
Off The computer is turned off.
Ventilation slots Dissipate internal heat.
Note: Make sure that the ventilation slots are not blocked or else the computer may overheat.

Chapter 1. Getting to know your computer
7
Rear view ----------------------------------------------------------------------------------------
Ventilation slots Dissipate internal heat.
Note: Make sure that the ventilation slots are not blocked or else the computer may overheat.
Type -C por t The Type-C port is compatible with:
•USB 3.1
•DisplayPort 1.2 output
DisplayPort mini
connector
Connects to external display devices.
USB 3.1 port Connects to USB devices.
Note: For details, see “Connecting USB device” on page 9.
HDMI port Connects to devices with HDMI input such as a TV or an external
display.
RJ-45 port Connects the computer to an Ethernet network.
Note: For details, see “Connecting network cables” on page 10.
AC power adapter jack Connects to the AC power adapter.

8
Chapter 1. Getting to know your computer
Kensington mini security
slot
For attaching a Kensington MiniSaver™ Mobile (or compatible) lock.
Note: Lock is not supplied. When purchasing a lock, choose one that utilizes the Cleat™ locking
mechanism and verify its compatibility with the slot before purchase. A lock utilizing the T-Bar™
locking mechanism is not compatible with the Kensington mini security slot.
Charging status indicator
Indicator Indicator status Charge
status Meaning
Charging
status
indicator
On (solid white) Charging The battery has between 80% and 100%
charge.
On (solid amber) Charging The battery has between 0% and 79%
charge.
Off Discharging Disconnect the AC power adapter from
the computer.

Chapter 1. Getting to know your computer
9
Connecting USB device
Your computer comes with three USB ports compatible with USB devices.
The first time you plug a USB device into a particular USB port on your computer, Windows
automatically installs a driver for that device. After the driver has been installed, you can
disconnect and reconnect the device without performing any additional steps.
Note: Typically, Windows detects a new device after it has been connected, and then installs the driver
automatically. However, some devices may require you to install the driver before connecting. Check
the documentation provided by the device’s manufacturer before connecting the device.
Before disconnecting a USB storage device, make sure your computer has finished transferring
data to that device. Click the Safely Remove Hardware and Eject Media icon in the Windows
notification area to remove the device before disconnecting.
Note: If your USB device uses a power cord, connect the device to a power source before connecting it.
Otherwise, the device may not be recognized.

10
Chapter 1. Getting to know your computer
Connecting network cables
Wired connections are a reliable and safe way to connect the computer to the Internet. You can
connect a network cable to your computer.
Software configuration
Consult your Internet Service Provider (ISP) for details on how to configure your computer.

Chapter 1. Getting to know your computer
11
Bottom view -----------------------------------------------------------------------------------
Louvers Allow air to enter the computer for cooling.
Speakers Provide audio output.

12
Chapter 2. Starting to use Windows 10
Note: Windows®10 has an updated version. If you are using the updated version, some operations may be
different. Please refer to the actual product.
Configuring the operating system for the first time ------------
You may need to configure the operating system when it is first used.
The configuration process may include the procedures below:
• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the operating system
• Creating a user account
Operating system interface--------------------------------------------------------
Windows 10 comes with a powerful and useful start menu.
To open the start menu, do one of the following:
• Press the Windows key on the keyboard.
•Select Start on the lower-left corner of the desktop.
Settings button Search box
Power button Task view button
Start button

Chapter 2. Starting to use Windows 10
13
Settings
Settings lets you perform basic tasks. You can also search for more settings with the settings
search box in the upper-right corner.
To open the settings, do one of the following:
•PressFn + F9 to open the settings interface.
• Open the start menu, and then select Settings .
Personalize the start menu
You can personalize the start menu with your favorite apps.
To personalize the start menu, do the following:
1Open the start menu and find the apps list on the left.
2Right click the app you want to add to the start menu, and then select Pin to Start.
Note: You can also drag apps from the apps list to add them to the start menu.

14
Chapter 2. Starting to use Windows 10
Putting the computer to sleep or shutting it down --------------
When you have finished working with your computer, you can put it to sleep or shut it down.
Putting your computer to sleep
If you will be away from your computer for only a short time, put the computer to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the
startup process.
To put the computer to sleep, do one of the following:
• Close the display lid.
• Press the Power button.
• Open the start menu, and then select Power Sleep.
Note: Wait until the power indicator light starts blinking (indicating that the computer is in sleep mode)
before you move your computer. Moving your computer while the hard disk is spinning can damage
the hard disk, causing loss of data.
To wake the computer, do one of the following:
• Press any key on the keyboard.
• Press the Power button.

Chapter 2. Starting to use Windows 10
15
Shutting down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down the computer, do one of the following:
• Open the start menu, and then select Power Shut down.
•Right-click the Start button in the lower-left corner and select Shut down or sign out Shut
down.

16
Chapter 2. Starting to use Windows 10
Task and desktop management ------------------------------------------------
Ta s k v i e w
To open the task view, do one of the following:
• Select the Task view button on the task bar.
• Press the Windows key + Tab.
Virtual desktop management
Windows 10 supports the ability to create, manage and switch between virtual desktops.
To create a new virtual desktop, do one of the following:
• Open the task view, and then select New desktop.
• Press the Windows key + Ctrl + D.
To switch between different desktops, do one of the following:
• Open the task view and select the desktop you want active.
• Press the Windows key + Ctrl + / to scroll through the desktops you’ve created.