Lenovo ThinkSystem SR250 V2 User manual

ThinkSystem SR250 V2
Type 7D7Q and 7D7R
Quick Start
Your shipping box contains the following items:
⚫SR250 V2
⚫Material box, including printed documentation
If any item is missing or damaged, contact your place of purchase.
Ensure that you retain your proof of purchase and packing material.
They might be required to receive warranty service.
First glance
Server front view:
•Four 3.5-inch drives model
VGA connector (optional)
Front operator panel
USB 2.0 connector
Four 3.5-inch drive bays
(0-3)
USB 3.2 Gen 1 connector
Rack release latches
•Ten 2.5-inch hot-swap drives model
USB 2.0 connector
VGA connector (optional)
USB 3.2 Gen 1 connector
Ten 2.5-inch hot-swap drive
bays (0-9)
Front operator panel
Rack release latches
Server rear view:
•Fixed power supply model
PCIe slot 1
Ethernet connector 1
(shared with XCC network
port)
PCIe slot 2
Dedicated XClarity
Controller (XCC) network
connector
Power connector
VGA connector
USB 3.2 Gen 2 connectors
Serial connector
Ethernet connector 2
Note 1: For the rear view of the redundant power supply model, there
are two power connectors on your server.
Note 2: Depending on the configuration, the illustrations above might
differ slightly from your server.
Setting up the System
1. Install the required server components.
2. Install the server into the rack.
See the Rack Installation Guide provided with the rail kit.
3. Connect the cables.
4. Connect the management controller to the network.
5. Power on the server.
6. Configure the system.
For detailed information about installing hardware options and
configuring the system, see the following website:
http://thinksystem.lenovofiles.com/help/topic/sr250-
v2/introduction.html

Technical specifications
Dimensions and weight
•Height: 43 mm (1.7 inches)
•Width: 435 mm (17.1 inches)
- With rack handles: 482 mm (18.98 inches)
- Without rack handles: 435 mm (17.1 inches)
•Depth: 545 mm (21.5 inches)
Note: The depth is measured from the front mounting
flange of the rack to the rear of the server.
•Weight (depending upon configuration):
- Maximum: 12.3 kg (27.1 lbs)
Processor
Your server comes with one Intel®multi-core processor from
Pentium®or Xeon®E processor family.
Memory
⚫Minimum: 8GB
⚫Maximum: 128 GB
⚫DIMM types:
- ThinkSystem 8GB TruDDR4 3200 MHz (1Rx8, 1.2V)
ECC UDIMM
- ThinkSystem 16GB TruDDR4 3200MHz (2Rx8, 1.2V)
ECC UDIMM
- ThinkSystem 32GB TruDDR4 3200MHz (2Rx8, 1.2V)
ECC UDIMM
⚫Slots: Four DIMM slots
Node expansion bays (depending on the
model)
⚫2.5-inch models:
- Supports up to eight hot-swap SAS/SATA drive
bays.
- Supports up to ten hot-swap SAS/SATA drive bays.
⚫3.5-inch models:
- Supports up to four simple-swap SATA drive bays.
- Supports up to three simple-swap SATA drive bays
and one NVMe drive bay.
- Supports up to four hot-swap SAS/SATA drive bays.
Where to go for support
Link
QR Code
Lenovo Press
(Product guides and white
papers)
https://lenovopress.com/
Lenovo Datacenter Systems
Forums
https://forums.lenovo.com/t5/
Datacenter-Systems/ct-
p/sv_eg
Lenovo Support –SR250 V2
(including drivers and
software)
http://datacentersupport.leno
vo.com/products/servers/thin
ksystem/sr250v2
Lenovo Product Security
Advisories
http://support.lenovo.com/us/
en/product_security/home
Lenovo Server Proven
(Compatibility information)
https://static.lenovo.com/us/e
n/serverproven/index.shtml
Second Edition (April 2022)
© Copyright Lenovo 2022.
LIMITED AND RESTRICTED RIGHTS NOTICE: If
data or software is delivered pursuant to a General
Services Administration (GSA) contract, use,
reproduction, or disclosure is subject to restrictions
set forth in Contract No. GS‐35F‐05925.