Lenovo F800 User manual

Please read carefully before use
Lenovo Multi-mode WiFi Storage F800
Quick Guide
Lenovo Multi-mode WiFi Storage F800 integrates wireless hard drive, wireless router and mobile power
into one multifunctional portable product, to bring more fun and convenience to your life.
Lenovo F800 1
USB 3.0 cable 1
Quick guide 1
Warranty and notice 1
● F800 Detail Packing List
●F800 Interface specification

1. USB interface: external device charging in shutdown mode
2. Long press the power button for 2 seconds: turn F800 on / off
3. Micro USB3.0: data transmission, charging the unit
4. Reset button: Long press 6 seconds to restore factory settings
5. Network interface: plug the network cable to connect to a wired router
6. Wireless indicator: indicates network connection status(blue light:connected to the device but not
connected to the Internet; green light: connected to the device and connected to the Internet)
7. Read/write indicator: Indicates internal disk read/write status (white light on/white light flashes: drive is
properly connected/data being exchanged)
8. Battery level indicator: Indicates F800 battery status (red: battery is low; green: working status; green
flashing: normal charging or charging while using; light off: battery is full)
When power is on, the user can simply connect F800 wireless SSID to share the wireless hard drive data;
currently F800 supports concurrent access of five users.
Note: in shutdown mode, F800 can be used as ordinary mobile hard drive.
Client Software
Note: F800 wireless hard drive functions are implemented through client software tools.
Please read carefully before use
● F800 wireless hard drive function

1. Download the free application "Wi-Fi Storage" from Apple Store and install the iOS client.
☆ Please refer to iOS Application Installation Manual.
2. After successful installation, an application icon of Wi-Fi Storage will appear on the desktop.
3. Turn on F800; after wireless signal becomes stable, set Wi-Fi and choose wireless signal "LenovoF800
-XXXX" through the iOS mobile device, then connect the signal (default password: 11111111).
4. Can initiate the iOS Wi-Fi Storage client after successful connection, input user name and password
when Wi-Fi storage login window appears, default username and password are admin and password.
5. F800 can be accessed through the iOS client after successful connection.
6. For specific client operation, please see User Manual of the F800 hard drive.
1. Scan the code on product package to download the free client application "Wi-Fi Storage" from Lenovo
store, Google and other stores and install Android client
☆ Can either input internet address http://3g.lenovomm.com/w3g/app/12496215.html
☆ Please refer to Android Application Installation Manual
2. After successful installation, an application icon of Wi-Fi Storage will appear on the desktop.
3. Turn on F800; after wireless signal becomes stable, initiate the Wi-Fi Storage application.
4. Find the F800 wireless signal "LenovoF800-XXXX" per Wi-Fi Storage application instruction and connect
the signal (default password: 11111111).
5. The login window for Wi-Fi storage will emerge after the connection succeeded, input user name and
password, default username and password are admin and password.
6. F800 can be accessed through the Android client after successful login.
7. For specific client operation, please see User Manual of the F800 hard drive.
● Android client
● iOS Mobile Device Client
Please read carefully before use

1. Copy the PC client which is pre-stalled in hard drive into PC.
2. Connect LenovoF800-xxxx in PC wireless management interface, default internet password is 11111111.
3. Double click the client software after internet connection succeeded, initiate the client and then arise
interface as below.
Can either input 192.168.100.1in browser directly, enter WEB management interface and access F800.
4. After F800 appeared in ‘Fresh’ list, click ‘my storage’ and login window will emerge, input user name
and password, default user name and password are admin and password, then F800 can be accessed.
● Windows/Mac PC client
Please read carefully before use
192.168.100.1

Network connection
Use a wired network connection
As shown below, when F800 is turned on, use Ethernet cable to connect F800 port to your router.
Wired connection schema
Use a wireless network connection please refer to F800 User Manual in hard drive
● F800 wireless router function
Please read carefully before use

Charging mobile phone through F800
When F800 is shut-down, connect the mobile phone that needs to be charged via phone’s USB cable
into the F800 USB interface, the F800 then becomes a power charger. While charging external devices,
the power indicator will remain lighted.
Charging the F800
Use the accompanying USB cable to connect the F800 via its Micro USB3.0 port to an 5V DC adapter
(not provided in box) or other charging device to charge the F800; while charging, the battery
indicator will flash; when the battery is full, the battery indicator will turn off.
● F800 mobile power function
Please read carefully before use