Lenovo ZA7D0067IT How to use

Lenovo
Tab P11 Pro
Read this guide carefully before using your device.
All information labeled with * in this guide only refers to the WLAN
+ LTE model.
https://support.lenovo.com
https://forums.lenovo.com
Safety, Warranty
& Quick Start Guide
Lenovo TB-J706F
Lenovo TB-J706L
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Lenovo Tab P11 Pro 128GB 4G
(ZA7D0067IT) o cerca il tuo prodotto tra le migliori offerte di Tablet

Reading before using your device
Reading first - regulatory information
Device models equipped with wireless communications comply with the radio
frequency and safety standards of any country or region in which it has been
approved for wireless use. In addition, if your product contains a telecom modem,
it complies with the requirements for connection to the telephone network in your
country.
Be sure to read the Regulatory Notice for your country or region before using
the wireless devices contained in your device. To obtain a PDF version of the
Regulatory Notice, go to https://support.lenovo.com.
Getting support
To get support on network services and billing, contact your wireless network
operator. To learn how to use your device and view its technical specifications, go
to https://support.lenovo.com.
Accessing your User Guide
Your User Guide contains detailed information about your device. To download
the publications for your device, go to https://support.lenovo.com and follow the
instructions on the screen.
Legal notices
Lenovo and the Lenovo logo are trademarks of Lenovo in the United States, other
countries, or both.
Other company, product, or service names may be trademarks or service marks of
others.
Dolby, Dolby Audio, Dolby Vision, Dolby Atmos, and the double-D symbol are
trademarks of Dolby Laboratories. Manufactured under license from Dolby
Laboratories. Confidential unpublished works. Copyright © 1992-2020 Dolby
Laboratories. All rights reserved.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered
pursuant a General Services Administration “GSA” contract, use, reproduction, or
disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.

1
Device overview
Model Version
Lenovo TB-J706F WLAN
Lenovo TB-J706L WLAN + LTE
1Volume up button 2Volume down button 3Microphones
4Front camera 5Light sensor 6ToF sensor
7Speakers 8USB-C connector 9Touch screen
10 Card tray 11 Power button/Fingerprint
sensor 12 Flashlight
13 Rear camera 14 Wide-angle camera
15 4-point pogo-pin smart connector (for the compatible keyboard and Smart
Charging Station)
•The WLAN version does not have a Nano-SIM card slot.
•USB-C connector only supports the USB-C to 3.5mm digital adapter to
connect a 3.5mm audio plug.
•All pictures and illustrations in this document are for your reference only and
may differ from the final product.
4 5 6 4
1 2 3 3
7
8
9
7
7
10
7
11
12 13 14
15

2
Preparing your device
Installing cards
Install the cards as shown in the figure.
•Power o the device before inserting or removing a card.
•Note that the WLAN version does not have a Nano-SIM card slot.
Charging your device
Connect your device to a power
outlet using the USB cable and
power adapter provided.
microSD microSD
SIM
Turning on
Press and hold the Power button until
the Lenovo logo appears.

3
Logging in with your fingerprint
Touch the fingerprint sensor to quickly unlock the screen.
It is recommended to follow the
onscreen instructions and register
your fingerprint when powering
on your device for the first time.
You can also go to Settings >
Security > Fingerprint to register
a fingerprint.
Before using fingerprint functions, you need to set a lock screen password. Go to
Settings > Security > Screen lock to set up.
Accessories (optional)
The accessories do not come with all models, and are sold separately.
Keyboard pack
Keyboard Stand Cover
Keyboard layouts vary from country to country. The Keyboard layout in this
document is for reference only and your Keyboard may differ.
1
24
5
3
1Keyboard connector 2Keyboard 3Trackpad
4Hinge 5Kickstand

4
Attaching the Keyboard pack
Keyboard pack configurations
Attach the stand cover and keyboard to the tablet as shown in the following
figure.
The Tablet can be used with the entire Keyboard pack attached, or with the
Stand Cover alone.
1 2
•When you are attaching the Stand Cover to the Tablet, make sure
that the camera hole is aligned with the tablet’s rear cameras.

5
Opening and adjusting the Kickstand
You can adjust the Tablet angle using the Stand Cover. Grasp either side of
the kickstand and gently open it until you reach the desired angle.
1
2 3
To prevent damage, do not apply excessive pressure to the Stand Cover or force
the Kickstand beyond its natural range of motion.
•Do not overtilt or apply excessive pressure to the Stand Cover,
doing so may damage the hinges.
•Adjust the tablet angle by opening the Kickstand and changing the
position of the tablet until the desired angle is found.
•The Tablet, Keyboard, and Stand Cover all contain magnetic
materials. To avoid loss of magnetism, avoid exposing the Tablet,
Keyboard, and Stand Cover to high temperatures or direct sunlight.
•To prevent demagnetization of credit cards and other items with magnetic
data, keep them away from the Tablet, Keyboard, and Stand Cover.

6
Overview
Charging the pen
Lenovo Precision Pen 2
You can use the Lenovo Precision Pen 2 in place of your fingers for a better
experience, such as working with specific applications to write or draw on
the screen.
1. Remove the pen cap in the direction
shown in the figure.
2. Connect the pen to a charger with a
USB-C cable.
3. Replace the pen cap on the pen.
You can start to use the pen after
charging.
•The indicator light will have an amber glow while charging the pen
and a white glow after it is fully charged.
•Please be cautious when using the pen. The pen contains sensitive
electronic components. Dropping it may cause damage.
1Pen cap
2Indicator LED
3Upper button
4Lower button
5Tip
2
1
3
4
5
1 2 3

7
Replace tip
1. Pinch the tip with tweezers or another suitable tool.
2. Remove the tip.
3. Install the replacement tip (supplied).
1
1
2
3
Store the Pen
Method one:
1. Slide the pen into the pen case.
2. Remove the transparent film on the back of the pen case.
3. Stick the pen case to the plastic panel.
4. Thread the ring through the X-shaped hole in the top of the plastic panel.
1 2 3 4

8
Method two:
1. Slide the pen into the pen case.
2. Remove the transparent film on the back of the pen case.
3. Stick the pen case to the back of the tablet or stand cover.
3
21