Lenoxx Sound BP-103 User manual

®
COMPACT DISC PLAYER
PLAYS MUSIC COMPACT DISCS
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT
RECEIVES TV BAND AND WEATHER BAND
RECEIVES AM/FM BROADCASTS
RECORDS FROM CD, RADIO, OR BUILT-IN MICROPHONE
FM STEREO AND POWER LED INDICATORS
2 WAY POWER - AC/DC
REQUIRES 6 SIZE C BATTERIES (not included)
IB-CD103(SY)-WM-E-053002








PLEASE READ CAREFULLY BEFORE USE
MODEL CD-103/BP-103
OPERATING INSTRUCTIONS
AM/FM/TV1/TV2 (WEATHER) BAND STEREO CASSETTE RECORDER

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, install in accordance with the manufacturers
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightening storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally or has been dropped.
14. This appliance shall not be exposed to dripping or splashing water and that no
object filled with liquid such as vases shall be placed on the apparatus.
1
WARNING
IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is
intended to alert the user to
the presence of uninsulated
dangerous voltage within
the products enclosure that
may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
(OR BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompanying
the appliance.
IB-CD103(SY)-WM-E-053002

2
ADDITIONAL SAFETY INSTRUCTIONS
1. Power Sources - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.
4. Servicing - The user should not attempt to service the appliance beyond that described in
the operating instructions. All other servicing should be referred to qualified service personnel.
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated
on the bottom of the set.
Do not apply oil or petroleum products or solvents to any part of this set.
It is the intent of Lenoxx that this product be used in full compliance with the
copyright laws of the United States and that prior permission be obtained from
copyright owners whenever recording songs from the RADIO or CDs.
IB-CD103(SY)-WM-E-053002
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

1. Use only the type and size of batteries mentioned in the operating instructions
manual (batteries are not included with this set, please buy the proper batteries).
2. Do not dispose the batteries into a fire. The cells may explode. Check with local
codes for possible special disposal instructions.
3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
4. Be careful when handling batteries in order not to short the battery with conducting
materials such as rings, bracelets and keys. The battery or conductor may over
heat and cause burns.
5. Do not attempt to recharge non-rechargeable batteries. The batteries may leak
corrosive electrolyte or explode.
6. Do not attempt to rejuvenate the batteries identified for use with this product by
heating them. Sudden release of the battery electrolyte may cause burns or
irritation to eyes or skin.
7. All batteries should be replaced at the same time. Mixing fresh and discharged
batteries could increase internal cell pressure and rupture the batteries.
8. When inserting batteries into this product, the proper polarity ( and ) or
direction must be observed. Reverse insertion of some or all of the batteries may
result in battery electrolyte leakage or explosion.
9. Remove the batteries from this product if the product will not be used for a long
period of time (several months or more) since during the period the batteries could
leak, damaging the product.
10. Discard weak or dead batteries as soon as possible since they are more likely to
leak in the product. Batteries should be replaced (depending on the product) when
the display gets dim or if the Low Battery Indicator shows or if the sound gets
distorted.
11. Do not store this product in high temperature areas. Batteries that are stored in a
freezer or refrigerator for the purpose of extending shelf life should be protected
from condensation during storage and defrosting. Batteries should be stabilized at
room temperature prior to use after cold storage.
12. If this product does not operate normally, see TROUBLE SHOOTING in this
instruction manual. If you cant resolve the problem, or if the product is damaged, refer to the
LENOXX WARRANTY INFORMATION. Opening or removing covers may expose you to
dangerous voltages or other risks. Incorrect reassembly can cause electric shock when
the appliance is subsequently used.
13. If liquid leaks from the batteries, carefully wipe this liquid. Do not allow it to touch your skin,
and discard the leaking batteries.
14. Do not mix batteries (OLD and NEW or CARBON and ALKALINE, etc.).
15. The use of rechargeable batteries is not recommended for this set because their
voltage and life is lower than standard batteries.
16. Installation of batteries should be done by an adult only.
SAVE THESE INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR
SET, READ AND FOLLOW THESE INSTRUCTIONS.
BATTERY SAFETY INSTRUCTIONS
3IB-CD103(SY)-WM-E-053002

CHOOSING THE POWER SOURCES
You can use the AC power or batteries as a power source.
4
To a wall outlet
NOTE: One blade of plug
and outlet is wider.
AC SOCKET
Battery compartment
IB-CD103(SY)-WM-E-090402
1. Connecting the AC power
cord
Insert one end of the supplied AC power cord into
the socket located at the rear of the player, and the
other end to the wall outlet.
2. Using the player on batteries
Insert 6 size C batteries (not supplied) into the
battery compartment.
To use the player on batteries, disconnect the AC
power cord from the player.
Tip
If the plug of the AC power
cord does not match your
outlet, do not force it.
Reverse it and try again.
This plug is polarized and
only fits one way into the
wall outlet and the back of
the set.
If the CD does not play
on batteries, this means
the batteries are almost
used up. But the radio may
continue to play on these
weak batteries because it
uses less power than the CD
player.
Replace the batteries when
the Power Lamp dims or
when the player stops
operating. Replace all the
batteries with new ones.
Before you replace the
batteries, be sure to take
out the CD from the player and
remember to check the
Battery Safety Instructions
on Page 3.

1
Slide the FUNCTION
switch to CD position
(power on), the POWER
lamp will be on. And the
display will show 2 dashes
  flashing , then
 .
3Close the CD DOOR by
pushing it down. The
display will show the total
tracks on that CD.
4
1
2 & 3
Lift the right corner of the
CD DOOR to open it and
place the CD in the CD
compartment. The label
side of the CD should face
upward.
2
Press the CD PLAY
button. The POWER and
PLAY lamps will be steady
on, the player plays all
the tracks once.
4
Connect the supplied AC power cord or batteries (see page 4).
Track
number
PLAY lamp
PLAYING A CD
PLAY/PAUSE
5
POWER
lamp
POWER
lamp
IB-CD103(SY)-WM-E-053002

USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
To Press or Adjust
Adjust the volume VOLUME control
Stop playback
Pause playback The PLAY lamp will flash
during pause. Press again
to resume play after pause.
Go to the next track
Go back to the previous
track
Locate a point in a song
BACKWARD or
FORWARD
Press and hold down while
playing until you find the
point.
TIP
When CD play is
paused, the PLAY/
PAUSE lamp will
flash and no music
will play.
Remove the CD Lift the CD DOOR (press
STOP first).
VOLUME CONTROL
FUNCTION SWITCH
Turn off the power Slide the FUNCTION switch
to TAPE position.
To resume play,
press the PAUSE
button again, the
PLAY lamp will stop
flashing and music
will play.
OPEN THE CD DOOR
BY LIFTING HERE
6
If you bump the set
during CD play, the
music will stop or
skip for a few
seconds. This is
normal for this type
of player.
TIP FORWARD
BACKWARD
Track number
IB-CD103(SY)-WM-E-053002
PLAY/PAUSE
BACKWARD FORWARD
STOP
PLAY/PAUSE
STOP

LISTENING TO THE RADIO
Connect the supplied AC power cord or batteries (see page 4).
Slide the FUNCTION switch to RADIO
position, the POWER lamp will be on.
1
2
3
1
2
3
Slide the BAND switch to the proper band
position (AM, FM, or TV1, TV2 (WEATHER
BAND)) that you want.
Select AM to tune AM radio stations.
Select FM to tune FM radio stations.
Select TV1 to tune TV channels 2 through 6.
Select TV2 to tune TV channels 7 through 13,
including WEATHER BAND.
Tune into the station you prefer using the
TUNING control (at the right side of the set).
Adjust for the clearest sound.
4The FM STEREO indicator will light up when
receiving FM Stereo broadcasts.
7
4
T
U
N
I
N
G
IB-CD103(SY)-WM-E-053002
WEATHER
NOTE 1: When tuning to TV band stations, many times a loud
buzzing will be heard, which results from the video portion
of the TV signal. This is normal for all TV band radios.
NOTE 2: TV band and Weather Band signals are weaker than
normal FM signals. Most TV band signals have a range
of only 50 miles (maximum) from the broadcast station.
NOTE 3: Some noise or 2 way radio conversations may be heard
on the TV band or Weather Band, this is normal and
results from the weaker signals of these broadcasts.
WB may not be received in all areas due to a lack of
transmission coverage for those areas or in some fringe
areas where TV signals can only be received by using
Cable.
FM
STEREO
POWER

USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
To Slide or Adjust
Adjust the volume VOLUME control
TIP
•Next time you want to
listen to the radio, just
slide the FUNCTION
switch to RADIO.The
player automatically
starts playing the pre-
viously tuned station.
Turn off the Radio Slide the FUNCTION
switch to TAPE position
To improve broadcast reception
Change position of the antenna for FM,TV1 or TV2
(WEATHER BAND). Move the set itself for AM.
8IB-CD103(SY)-WM-E-053002
VOLUME
CONTROL
FUNCTION SWITCH

PLAYING A TAPE
Connect the supplied AC power cord or batteries (see page 4).
Press the STOP/EJECT
button to open the tape
compartment and insert
a recorded tape. Close
the door.
3
2
2
3Press the PLAY button.
The player turns on and
starts playing.
PLAY
Slide the FUNCTION
switch to TAPE position.
1
4
When the set finishes
playing this side of the
tape, the set will stop. To
hear the other side of the
tape, flip the tape over,
then reinsert and press
PLAY.
AUTO STOP
INSERT TAPE THIS WAY
FULL REEL ON RIGHT
STOP/EJECT
9
1
FULL
REEL
EMPTY
REEL
TAPE PLAY DIRECTION
A
OK NO
OK NO
IB-CD103(SY)-WM-E-053002
/

USE THESE BUTTONS FOR ADDITIONAL
OPERATIONS
To
Stop playback
Eject the cassette
Press or Adjust
Adjust the volume VOLUME control
Fast forward or rewind
the tape
FAST FORWARD button or
REWIND button
Pause playback PAUSE button
Press again to resume play after
pause.
STOP/EJECT button
STOP/EJECT button
VOLUME CONTROL
PAUSE STOP/EJECT
FAST F.&REWIND
To enjoy the music
without disturbing others
Insert your headphone plug into
the PHONES jack.
PHONES JACK
MICROPHONE
10
To shut power off Make sure cassette buttons are
all up (stop) and FUNCTION switch
is in the center position (power
off).
IB-CD103(SY)-WM-E-053002
PLAY

RECORDING ON A TAPE
Connect the supplied AC power cord or batteries (see page 4).
Press the STOP/EJECT button to
open the tape compartment and
insert a blank tape. Select the
program source (AM, FM, TV1,
TV2, CD, or, built-in microphone)
you want to record.
13
1
2
STOP/EJECT
To record from the CD player, insert
a CD and follow the steps to play a
CD (see page 5).
To record from the radio, slide the
FUNCTION switch to RADIO, and
tune into the station you want (see
page 7).
To record from the built-in
microphone, leave the FUNCTION
switch at the TAPE position, and
speak in front of the set.
3Press the RECORD button to start
recording. (The PLAY button is
depressed automatically.)
RECORD
To hear what you recorded, slide
the FUNCTION switch to TAPE
position, then press REWIND and
PLAY.
4
REWIND PLAY
11
FULL
REEL
EMPTY
REEL
TAPE PLAY DIRECTION
A
OK NO
OK NO
IB-CD103(SY)-WM-E-053002
INSERT TAPE THIS WAY
FULL REEL ON RIGHT
/

USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
To
Turn off the power
Press the STOP/EJECT
button and slide the
FUNCTION switch to TAPE
position.
TIP
Press or Adjust
Stop recording STOP/EJECT button
PAUSE button
Press the button again to
resume recording.
Pause recording
•For best recording
effect, use the AC
power instead of
batteries.
•To erase a
recording, just start
a new recording,
and the old one is
automatically
replaced.
FUNCTION SWITCH
PAUSE STOP/EJECT
12 IB-CD103(SY)-WM-E-053002

PLAYING CD TRACKS REPEATEDLY
(REPEAT PLAY)
1. Slide the FUNCTION switch to CD position.
2. Select the track by pressing or , and then press .
3. Press the CD REPEAT button.
To repeat Press
a single track (song) Press the REPEAT button
once, the REPEAT lamp will
flash.
You can play CD tracks over and over in normal or program play modes (see page
14).
all the tracks (all songs) Press the REPEAT button
twice, the REPEAT lamp will
be steady on.
FUNCTION SWITCH
Display shows
To cancel Repeat Play
Press the REPEAT button until the REPEAT lamp goes off.
13
REPEAT BUTTON
programmed tracks
During programmed play,
press the REPEAT button
twice, both the REPEAT and
PROGRAM lamps will be
steady on.
REPEAT
IB-CD103(SY)-WM-E-053002
PROGRAM BUTTON
PLAY/
PAUSE
PROGRAM
PROGRAM
REPEAT
PROGRAM
PLAY/
PAUSE
PLAY/
PAUSE
REPEAT

Programmed Play
PROGRAM
14
PLAYING CD TRACKS IN PROGRAMMED ORDER
To change the current program
Just create a new program following the Programming procedure.
You can make a program of up to 16
tracks in the order you want them to be
played.
PROGRAM
REPEAT
IB-CD103(SY)-WM-E-053002
1. Slide the FUNCTION switch to CD position.
Make sure the CD is stopped.
2. Press the PROGRAM button. The letters
  and the PROGRAM lamp will flash.
3. Press or to select the tracks you want to
program in the order you want.
4. Press the PROGRAM button to confirm.
The letters   will flash and the PROGRAM
lamp will be steady on.
5. Repeat steps 3 and 4. You can program up to 16
tracks.
6. Press to start programmed play. During the
programmed play, the selected track numbers
will display in the programmed order.
The PLAY and PROGRAM lamps will be steady
on.
REPEAT
PROGRAM
To cancel Programmed Play
Press the STOP button twice or slide the FUNCTION switch to
TAPE position (POWER OFF).
PLAY/
PAUSE
PLAY/
PAUSE

PRECAUTIONS
On Safety
As the laser beam used in the CD
player section may be harmful to the
eyes, do not attempt to disassemble
the cabinet. Refer servicing to
qualified personnel only.
Should any solid object or liquid fall
into the player, unplug the player, and
have it checked by qualified personnel
before operating it any further.
On Power Sources
For battery operation, use 6 size C
batteries. We recommend alkaline
batteries for longer life.
When the batteries will not be used
for a few weeks or more, remove them
to avoid damage that can be caused
by battery leakage or corrosion.
15
On Operation
If the player is brought directly from a
cold to a warm location, or is placed
in a very damp room, moisture may
condense on the lens inside the CD
player section. Should this occur, the
player will not operate properly. In
this case, remove the CD and wait
about an hour for the moisture to
evaporate. If the player has not been
used for a long time, set it in the
playback mode to warm it up for a few
minutes before inserting a cassette.
This CD player is designed to be
played on a stable no vibration
position. If you bump the set during
CD play, the music will stop or skip for
a few seconds. This is normal for this
type of player.
On Placement
Do not leave the player in a location
near a heat source, or in a place
subject to direct sunlight, excessive
dust or mechanical shock.
Do not place the player on an inclined
or unstable place.
Do not place anything within 1 inch of
the back of the cabinet. The
ventilation holes must not be covered
for the player to operate properly and
prolong the life of its components.
If the player is left in a car parked in
the sun, be sure to choose a location
in the car where the player will not be
subjected to the direct rays of the
sun.
Since a strong magnet is used for the
speakers, keep personal credit cards
using magnetic coding or springwound
watches away from the player to
prevent possible damage from the
magnets.
If you have any questions or problems
concerning your player, please contact
our customer service department at
1-800-315-5885.
(Monday - Thursday 09:00 AM - 05:00 PM,
Friday 09:00 AM - 01:00 PM EST)
IB-CD103(SY)-WM-E-053002

PRECAUTIONS (continued)
Notes on CDs
Before playing, clean the CD with a
cleaning cloth. Wipe the CD from the
center out.
Do not use solvents such as benzene,
thinner, commercially available
cleaners or anti-static spray intended
for vinyl LPs.
Do not expose the CD to direct
sunlight or heat sources such as hot
air ducts, nor leave it in a car parked
in direct sunlight as there can be a
considerable rise in temperature inside
the car.
Do not stick paper or stickers on the
CD, nor scratch the CD.
To record on a tape with its tab broken
off, cover the respective tab hole for
side A or B with adhesive tape.
Use of a cassette with more than
90 minutes, such as C-120 (120
minutes), is not recommended.
The extreme thinness of this tape
may damage this set.
Side A
Tab for side A
Tab for side B
16
Notes on Cassettes
Break off the cassette tab from side A
or B to prevent accidental recording.
IB-CD103(SY)-WM-E-090402
After playing, store the CD in its case.
If there is a scratch, dirt or fingerprints
on the CD, it may cause a tracking
error or skipping.
To reduce the chances of tape
jamming or tangling, you should check
that there are no loose layers of tape
visible through the cassette center
window. If any, tighten these loose
layers of tape using a pencil before
inserting the cassette into the set.

MAINTENANCE
Cleaning the Lens
If the lens becomes dirty, it may cause a
skipping of sound during CD operation.
Clean with a commercially available lens
cleaner and blower.
Cleaning the Tape Heads
Wipe the heads, the pinch roller and
the capstan with a cleaning swab slightly
moistened with cleaning fluid or alcohol
after every 10 hours of operation for
optimum playback and recording quality.
After cleaning, insert a tape when the
areas cleaned are completely dry.
Cleaning the Cabinet
Clean the cabinet, panel and controls
with a soft cloth slightly moistened with
a mild detergent solution. Do not use
any type of abrasive pad, scouring
powder, or solvent, such as alcohol or
benzene.
RECORD/PLAY BACK HEAD
PINCH ROLLER
CAPSTAN COTTON SWAB
ERASE HEAD
17
Notes for Storing
Cassette Tapes
1. Do not put a tape near a magnetic
field, such as a TV, or speaker.
Magnetic fields may reduce the tape
sensitivity or even erase the
recording.
2. Do not store tape for any length of
time in a hot, moist or dusty place.
NOTE: In order to see and clean the
head, you may have to press
PLAY first.
IB-CD103(SY)-WM-E-053002
PROTECT YOUR FINE FURNITURE
WE RECOMMEND A CLOTH OR OTHER
PROTECTIVE MATERIAL BE PLACED
UNDER THE SET WHEN PLACING IT
ON SURFACE WITH A NATURAL OR
LACQUER FINISH.
ADVICE

TROUBLE SHOOTING
Problem Remedy
The power is not on.
Connect the AC power cord to a wall outlet
securely.
Make sure the batteries are inserted
correctly and they are fresh.
There is no sound.
Make sure the FUNCTION switch is in the correct
position.
Adjust the volume.
Unplug the headphones when listening through
speakers.
CD does not play.
The sound drops out.
The sound is weak or has poor
quality. Replace all the batteries with new ones if they are
weak, or bring the set near a window, or rotate the
set.
The tape does not play or record
Make sure the recording tab on the cassette is in
place.
Make sure the FUNCTION switch is in the correct
position.
The tape does not erase
completely. Clean the erasing head (see page 17).
Replace all the batteries with new ones if they
are weak.
The sound is weak/The sound
quality is poor. Clean the heads, pinch roller and capstan
(see page 17).
General
CD player
Radio
Tape player
Cassette PLAY button pops up. The tape has reached its end. Remove it, flip to the
other side and re-insert.
18 IB-CD103(SY)-WM-E-090402
The reception of FM/TV/WB band
is weak. Adjust the length and the angle of the antenna to
change position for better reception.
Make sure the tape is inserted correctly.
Make sure that the CD compartment is closed.
Place the CD with the label side up.
Clean the CD.
Take out the CD and leave the CD DOOR open for
about an hour to dry moisture condensation.
Make sure the FUNCTION switch is at CD
position.
Clean the CD, or replace it if the CD is badly
damaged.
Place the player in a location free from
vibration.
Check if your batteries are fresh.
CD does not play while radio may
continue to play. It is normal since the radio uses less power than
the CD player.
Tape jamming or tangling Use only better quality tapes.
Do not use a cassette with more than 90 minutes.
Make sure there are no loose layers of tape visible
before inserting the cassette.

SPECIFICATION
General Description
Power source: AC 120V, 60Hz 12 Watts
DC 9V (6 size C batteries)
(Alkaline batteries are recommended)
Speakers: 2 - 31/28 ohm
Output power: 1.5W/channel
Dimensions: Width: 14 1/2
Depth: 8
Height: 6 3/4
Weight: 5LBs (without batteries)
CD Section
Plays disc type: Any normal CD used in portable players
Laser wavelength: 760 - 800 NM
Tracking method: 3 - spot error detection 3.86 mm lens
Tape Recorder Section
Frequency response: Standard normal bias cassette tape,
70Hz - 10kHz
Radio Section
Frequency range: FM: 88 - 108 MHz
AM: 530 - 1700 kHz
LENOXX reserves the right to make design and specification changes for
product improvement.
© 2002 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
Frequency response: 50Hz - 15kHz +1/-2dB
For customer service
Dial 1-800-315-5885 (MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)
or Visit Our Website: http://www.lenoxx.com
19
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).
This set will not play CDRW encoded discs.
IB-CD103(SY)-WM-E-053002
TV1: channels 2-6
TV2(WEATHER BAND): channels 7-13