Questions? Call Customer Service at 1.888.213.5015, Mon-Fri 8AM-6PM EST
Affix Adjustable Uprights and TV Mount Rails with M6 or M8
Screws and Washers. Use Spacers as needed to ensure the
Adjustable Uprights and TV Mount Rails are level.
Fig. 4
set screws
Loosen set screws on Adjustable Uprights. Slide
Adjustable Uprights to align with TV mount holes.
Fig. 3
Loosely attach Swing Arms to Paddles and Uprights
using Long Button Head Screws.
Fig. 5
Slide speaker flush and centered with TV. Screw Paddles to
T-nut in speaker’s mount rails using Short Button Head
Screws. Adjust speaker tilt using set screws in Paddles.
Fig. 7 Fig. 8
Tighten all screws and set screws down before mounting and
wiring the TV and speaker. 2 people are needed for this task.
(A)
Fig. 6
Position speaker so Paddles rest on speaker mount rails.
Align T-nuts in mount rails with holes on Paddles. Tighten
Long Button Head Screws with extra torque. (Mount rails
and T-nuts come attached to speaker.)
Place TV and Speaker facedown on a clean, padded
surface.
Fig. 1 Fig. 2
{Optional} For TVs with clear bezels or gaps between speaker
and TV, apply Foam Tape to TV’s edge and cut to size.