Leon FLEX User manual

FLEX MOUNT BRACKET
INSTALLATION GUIDE

Call Customer Service
1.888.213.5015
Mon-Fri 8am-6pm EST
Questions?
Visit us online for product support, guides and videos
www.leonspeakers.com/support

Completed Install
FLEX : Flex Mount Bracket
The Leon Flex Mount Bracket is a versatile speaker mounting system that
provides freedom of adjustment in a minimized form factor. This bracket
will also work with any small to medium size speaker with a flat back plate.

FlexMount Bracket : FLEX
Bracket Hardware
*Not to scale
4x4x 4x
Wood Screw Bonded Washer Drywall Anchor / Screw
Bracket Plate/Post
2x

For assistance, call: 1.888.213.5015 | Mon-Fri 8am-6pm EST
Parts List
*Not to scale
~ Drywall Anchor
~ Drywall or Wood Screw
~ Bracket
~ Swivel Mount
(installed on speaker)

- 6 -
FlexMount Bracket : FLEX
1x
Bracket Plate
Run Speaker Wire to mount location and
level Bracket Plate to wall
*Allow 12” of loose wire for easy install
**Top of speaker is higher than top of plate when mounted

For assistance, call: 1.888.213.5015 | Mon-Fri 8am-6pm EST
- 7 -
Remove Bracket and drill* Pilot Holes
*3/32” bit for Wood Screws
*5/16” bit for Drywall Anchors

- 8 -
FlexMount Bracket : FLEX
4x 4x 4x4x
Wood ScrewBonded WasherDrywall Anchor Drywall Screw
Attach Bracket Plate to wall
with Wood Screws or Drywall Anchors
*Thread Speaker Wire through Bracket Plate

For assistance, call: 1.888.213.5015 | Mon-Fri 8am-6pm EST
- 9 -
Hang Speaker by placing Swivel Mount
on Bracket Post
*Ensure Wiring is clear of Bracket Post

- 10 -
FlexMount Bracket : FLEX
Loosen Hex Bolts on Swivel Mount
to adjust horizontal pan
Loosen Hex Bolt on Bracket Post
to adjust vertical tilt
*Do not completely remove Hex Bolts
*Re-tighten Hex Bolt once adjustment is complete

For assistance, call: 1.888.213.5015 | Mon-Fri 8am-6pm EST
- 11 -
Connect Wiring to Speaker,
tighten all screws and connections
*Ensure correct +Positive/-Negative connections

715 W. Ellsworth Road Ann Arbor, Michigan 48108 | 1.888.213.5015 | www.leonspeakers.com