Leon HzUMB User manual

LS15-HzUMB-33UT
®
PICTURE PERFECT SOUND
CA LL 1.888.213.5015 OR VISIT WWW.LEONSPEAKERS.COM FOR MORE I NFORMATIO N
ALL INFORMATIONCOPYRIGHT ©2016, LEON SPEAKERS, INC.
QUESTIONS ?
Call Customer Service
1.888.213.5015
Mon–Fri 8AM–6PMEST
I N S T ALLA T ION GUIDE
for HzUT, HzUTLX, HzOTO, Hz33, Hz33LX
HzUMB
*Drawings not to scale
Place TV and Speaker facedown on a clean,
padded surface.
Fig. 1
Fig. 2
{Optional} For TVs with clear bezels or gaps
between speaker and TV, apply Foam Tape to TV’s
edge and cut to size.
Completed Assembly
HzUMB Parts
2 x
Hex Key
2 x
Paddles
2 x
Adjustable
Upright
2 x
Swing Arm
2 x
Short Button
Head Screw
1 x
Foam Tape
4 x
Long Button
Head Screw
Universal TV
Mount Hardware
4 x
M6 Lock
Washer
4 x
M8 Lock
Washer
4 x
Flat Washer
8 x
M6 Screw
8 x
M8 Screw
12 x
Spacers

LS15-HzUMB-33UT
®
PICTURE PERFECT SOUND
CA LL 1.888.213.5015 OR VISIT WWW.LEONSPEAKERS.COM FOR MORE I NFORMATIO N
ALL INFORMATIONCOPYRIGHT ©2016, LEON SPEAKERS, INC.
QUESTIONS ?
Call Customer Service
1.888.213.5015
Mon–Fri 8AM–6PMEST
I N S T ALLA T ION GUIDE
for HzUT, HzUTLX, HzOTO, Hz33, Hz33LX
HzUMB
*Drawings not to scale
Place TV and Speaker facedown on a clean,
padded surface.
Fig. 1
Fig. 2
{Optional} For TVs with clear bezels or gaps
between speaker and TV, apply Foam Tape to TV’s
edge and cut to size.
Completed Assembly
HzUMB Parts
2 x
Hex Key
2 x
Paddles
2 x
Adjustable
Upright
2 x
Swing Arm
2 x
Short Button
Head Screw
1 x
Foam Tape
4 x
Long Button
Head Screw
Universal TV
Mount Hardware
4 x
M6 Lock
Washer
4 x
M8 Lock
Washer
4 x
Flat Washer
8 x
M6 Screw
8 x
M8 Screw
12 x
Spacers

LS15-HzUMB-33UT
®
PICTURE PERFECT SOUND
CA LL 1.888.213.5015 OR VISIT WWW.LEONSPEAKERS.COM FOR MORE I NFORMATIO N
ALL INFORMATIONCOPYRIGHT ©2016, LEON SPEAKERS, INC.
QUESTIONS ?
Call Customer Service
1.888.213.5015
Mon–Fri 8AM–6PMEST
I N S T ALLA T ION GUIDE
for HzUT, HzUTLX, HzOTO, Hz33, Hz33LX
HzUMB
*Drawings not to scale
Place TV and Speaker facedown on a clean,
padded surface.
Fig. 1
Fig. 2
{Optional} For TVs with clear bezels or gaps
between speaker and TV, apply Foam Tape to TV’s
edge and cut to size.
Completed Assembly
HzUMB Parts
2 x
Hex Key
2 x
Paddles
2 x
Adjustable
Upright
2 x
Swing Arm
2 x
Short Button
Head Screw
1 x
Foam Tape
4 x
Long Button
Head Screw
Universal TV
Mount Hardware
4 x
M6 Lock
Washer
4 x
M8 Lock
Washer
4 x
Flat Washer
8 x
M6 Screw
8 x
M8 Screw
12 x
Spacers

Questions? Call Customer Service at 1.888.213.5015, Mon-Fri 8AM-6PM EST
Fig. 6
Position the speaker along the TV’s edge so the Paddles rest on the speaker’s mount rails. Align T-nuts in the
mount rails with holes on Paddles. Tighten the Long Button Head Screws with extra torque. (Mount rails and
T-nuts come attached to back of speaker.)
(B)(A)
(A)
(B)
(A) TV is thinner than speaker (B) TV is thicker than speaker
Loosely attach Swing Arms to Paddles and Adjustable Uprights using Long Button Head
Screws. Typically, Paddles will be oriented as shown in (A), but may be turned sideways for
thicker TVs as shown in (B).
Fig. 5
Affix Adjustable Uprights and TV Mount Rails with M6 or M8
Screws and Washers. Use Spacers as needed to ensure the
Adjustable Uprights and TV Mount Rails are level.
Fig. 4
set screws
Loosen set screws on Adjustable Uprights. Slide
Adjustable Uprights to align with TV mount holes.
Fig. 3
Tighten all screws and set screws down before carefully
mounting and wiring the TV and speaker. 2 people are
needed for this task.
Fig. 8
(B)(A)
(A)
Slide speaker flush and centered with TV. Screw Paddles to
sliding T-nut in speaker’s mount rails using Short Button
Head Screws.
Fig. 7

LS15-HzUMB-33UT
®
PICTURE PERFECT SOUND
CA LL 1.888.213.5015 OR VISIT WWW.LEONSPEAKERS.COM FOR MORE I NFORMATIO N
ALL INFORMATIONCOPYRIGHT ©2016, LEON SPEAKERS, INC.
QUESTIONS ?
Call Customer Service
1.888.213.5015
Mon–Fri 8AM–6PMEST
I N S T ALLA T ION GUIDE
for HzUT, HzUTLX, HzOTO, Hz33, Hz33LX
HzUMB
*Drawings not to scale
Place TV and Speaker facedown on a clean,
padded surface.
Fig. 1
Fig. 2
{Optional} For TVs with clear bezels or gaps
between speaker and TV, apply Foam Tape to TV’s
edge and cut to size.
Completed Assembly
HzUMB Parts
2 x
Hex Key
2 x
Paddles
2 x
Adjustable
Upright
2 x
Swing Arm
2 x
Short Button
Head Screw
1 x
Foam Tape
4 x
Long Button
Head Screw
Universal TV
Mount Hardware
4 x
M6 Lock
Washer
4 x
M8 Lock
Washer
4 x
Flat Washer
8 x
M6 Screw
8 x
M8 Screw
12 x
Spacers