Lesko YND-2000D User manual

User Manual
Model：YND-2000D

EN:
Security Precautions
Dear Customer
Thank you for choosing to use this product. For your convenience, please read this manual
carefully and follow the instructions in it. If you find any problem during the use of the product,
please refer to this instruction manual. Please keep this manual properly for reference.
Precautions:
1. Before using it for the first time, please check that the voltage you are using matches the
one required by the product nameplate.
2.If the power cord is damaged, in order to avoid danger, it must be replaced by the
manufacturer or the professional staff of the maintenance department.
3. Do not use the product near objects that can be easily absorbed such as curtains, and avoid
places where there are obstacles and instability around.
4. This product is strictly prohibited to use in the environment with flammable and explosive
materials, and the use environment should not exceed 30 degrees, and leave combustible
materials at least 1 meter to prevent fire.
5. When leaving or not used for a long time, please make sure to cut off the power and unplug
the power supply.
6. Make sure the machine is disconnected from the power supply when the power is off or
moving.
7. Please check the power cord and plug for damage before use.
8. Do not bend or pull the power cord to avoid poor contact.
9. When using the apparatus should be avoided on the sloping surface, should be placed on a
flat surface to use and can not be put down to use.
10. Prohibit the use of touching the air outlet iron mesh, in order to avoid burns.
11. Before pulling out the plug should first turn off the power, do not pull the power cord,
should hold the plug head pull out.
12. Do not use wet hands to pull the power plug, the risk of electric shock.
13. Do not use this product to heat around the bathtub, nozzle or swimming pool.
14. Electric heater should not be placed directly under the power outlet.
15. When working, it is absolutely forbidden to insert hands or foreign objects into the body of
the machine.
16. When there is a strange smell or sound during use, please stop using it immediately and
unplug it from the power supply.
17. Do not use if the power cord is exposed or damaged.
18. Children should be supervised to ensure that they do not play with the machine.
19. The machine should not be used by people (including children) with physical, sensory and
intellectual impairments or lack of experience and common sense, and should be used in the
presence of a guardian who is able to provide adequate supervision and instruction on how to
use the machine.

20. Electric heating surface stains, use a soft cloth with soap to wipe clean, do not use gasoline
or alcohol and other organic solutions, clean the machine first cut off the power, unplug the
power.
21. Do not use in high temperature, humid, dusty or volatile places such as acid and alkali oil.
22.Do not spray pesticides and flammable sprays around the product.
23. If there is a problem with the product, it is strictly forbidden to disassemble the machine by
yourself, and the machine should be sent to a service point for repair.
24. Do not use this heater with an external programmer, timer or any other device with
automatic power on because the heater can cause a fire hazard if it is covered or incorrectly
placed.
25. Without supervision, children should not clean and maintain the appliance.
26. This product is limited to use in the home or similar indoor locations.
Instructions
●When using the unit, please plug it into a standard socket with the specified current and
voltage.
1. Plug in the power, press the mechanical switch button on the back, the machine enters
standby mode.
2. Touch the key, the product enters the power-on mode, the default natural wind.
3. Press the key again, the product enters the standby state, the fan delayed air supply 30
seconds.
4. Touch the key, the product begins to shake the head left and right, and then touch to stop
shaking the head.
5. Touch the key, the product set temperature intelligent switching gear.
6.Touch the key to switch the product to natural wind, low heat, high heat.
The corresponding indicator lights up.
7.Touch the key product timing settings, respectively 2H, 4H, 6H, 2H + 6H = 8H, 4H + 6H = 10H,
2H + 4H + 6H = 12H, a total of 6 time settings.
Shaker Instructions
●Press the key product into the power-on mode, and then press this key, the machine
enters the standby state.
●Press the key to start the product to shake the head left and right, and then press to stop

shaking the head.
●Press the key to switch the product to natural air, low heat, high heat. The
corresponding indicator light is on.
●Press the key to set the temperature of the product intelligent switching gears.
●Press the key to set the product timing, respectively 2H, 4H, 6H, 2H+6H=8H, 4H+6H=10H,
2H+4H+6H=12H, a total of 6 time periods.
Shaker Precautions
●Shaker must be equipped with CR2025 twist button battery, when loading the battery, pay
attention to the polarity must not be installed in reverse.
●When using the remote control, the front end of the remote control must be aligned with the
receiving window (digital display screen) of the machine.
●Avoid direct sunlight on the receiving window, so as not to affect the effect of reception.
●Please keep the remote control in a safe place to avoid impact and dropping.
●When not in use for a long time, please take out the battery to avoid the battery leakage and
damage to the remote control.
●When replacing the battery of the remote control, please replace it according to the assembly
diagram on the back of the remote control.
Simple Troubleshooting
●Machine does not start: a. Please check whether the power cord plug into the socket; b.
Whether the power switch on the back of the machine; c. Whether the power socket is
connected to the power.
●Machine operation noise: check whether the machine is placed on the ground is balanced,
whether shaking.
●Heating time is too short and on: check whether the air inlet and outlet are blocked (such as
curtains, plastic bags, pieces of paper, etc.), eliminate the factors and then cool the machine and
start again.
●After the above checks fail to exclude the fault, please contact the local after-sales service
center, do not dismantle the machine for repair without authorization to avoid injury.
Storage and Maintenance
●Before cleaning, please turn off the power and unplug the power supply.
●Allow the machine to cool completely before wiping the outer surface with a wet soft cloth,
and use a soft brush to brush the ventilation holes.
●After cleaning, wait until the machine is completely dry before powering on and using or
putting into the original packaging, and place in a dry and ventilated environment.
●Do not rinse directly with water during the cleaning process to avoid damage to the machine.

●Do not use thinner, toluene, acidic detergent, alcohol and other chemical reagents to wipe
the machine.
Warranty
●The whole machine warranty period is one year (calculated from the date of invoice, warranty
coverage is limited to home use)
●Within the warranty period, where the quality of the product itself caused by the failure,
please customer with the purchase invoice in the local after-sales service center for free repair.
●Please keep the purchase invoice as a warranty certificate, once the invoice is altered, the
warranty will be invalid.
●Customers who have passed the warranty period, if you need to mail-order product parts,
you can contact our customer service mail-order, or you can also buy in the local network.
●If there is a year commitment in the manual, the manual shall prevail.
The following Cases Will not be Repaired Free of Charge
●No proof of purchase and valid invoice.
●Failure to operate the machine according to the requirements of the manual.
●One of the following cases is not covered by the warranty:
a、Damage caused by improper use, storage and maintenance of the consumer.
b、Not the company designated maintenance department to repair the damage caused by their
own disassembly.
c、Damage caused by force majeure.