LEUCHTWURM 43LED/528-W User manual

43LED/528-W & 43LED/528-S
Feature
1 ZONEN WIRELESS RGB CONTROLLER - Simple
für Gleichspannung oder Gleichstrom
verwendbar mit Empfänger 43LED/520 oder 43LED/521
Parameter
Installation
Remote
Part No. Operation Voltage Operation
Frequency
43LED/528-W 3VDC 434MHz/868MHz
Remarks
RF Wireless
Wiring diagram
43LED/528 are RF controllers for RGB color lighting. Each white can achieve 256 levels
brightness adjustment. Key part can be uninstall every easily to change battery and frames from other factory.
Receivers work with WIFI-RF convertor to be controlled by smart phone.
Receiver
Battary
43LED/528-S 3VDC 434MHz/868MHz RF Wireless
Operation
a.Learning
Press shortly the learning Key on the receiver, then push the rotary button .Once successfully learn, the LED
lights will blink on the receiver. Do the same for the other receivers if you use them, you can add as many
optional receivers as you want
b.Operation
-Short push rotary button to switch ON/OFF
-Adjust dim brightness by the rotary button from left to right 1-100%
-Adjust dim brightness by the rotary button from right to left 100-1%
-Long press rotary button, the light will be 100% brightness
-Double click rotary button, it will change color of RGB light. Double click again, will enter into dimming
brightness mode
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector
5
43LED/520 12-36VDC Constant voltage
4x(96-288)W4x8A
43LED/521 12-36VDC Constant current
4x(4.2-12.6)W
4x350mA
Power Supply
12-36VDC
L
N
110V-230VAC
white
43LED/521
LED CONTROLLER
1234
Learning Key
RGB LED strip
Power Supply
12-36VDC
L
N
AC110-230V
V+
G-
R-
OUTPUT SIGNAL
CH1
2
DC INPUT
12/36VDC
V+
V-
B-
3
B-
3
W-
4
Learning
Switch
LED CONTROLLER
43LED/520
RGB LED strip
Part No. Input Voltage Remarks
Output Current Output Power
Bedienungsanleitungen und Schaltdiagramme finden Sie
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
Bedienungsanleitungen und Schaltdiagramme finden Sie
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.

Warranty Agreement
1) We provide lifelong technical assistance with this product:
5-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Verwendbar mit 43LED/520 + 43LED/521
Technische Daten:
Batterie CR2032
RF Signal Wireless, 434 MHz / 868 MHz
Einlernen:
1. Einlernknopf am Empfänger kurz betätigen
2. Unmittelbar danach Bedienrad einmal kurz betätigen
(Erfolgreiches Einlernen bestätigt Reaktion des LED-Strip)
Funktionen:
Bedienrad 1 x kurz drucken à EIN oder AUS
Bedienrad 2 x kurz drucken à Wechsel Farbverlauf
Bedienrad AUS und wieder EINSCHALTEN à Dimmfunktion für eingestellte Farbe aktiviert
Bedienrad 1 x lang betätigen (ca. 3 sec.) à verschiedene „Weißtöne“ möglich
Bedienrad erneut 3 sec. betätigen à Weißton wird gewechselt