LevelOne POH-1620 User manual

Overiew
POH-1620 is one 16 port PoE injector, strictly conforms IEEE802.3af, IEEE802.3at
standard, its single port supports 30 watts maximum power. This PoE injector can
coordinate the applications of traditional network system/security product/LED light. It
transmits signal and electric power to terminal devices by using CAT5 or CAT6 cables，
and then make the traditional wiring more simple, convenient, safe and reliable.
PoE midspan network remote power supply, is one remote power supply for user
developed by Levelone. It’s indoor used and can work properly between
input voltage 100VAC-160VAC. The power supply is connected with network
equipment (like as IAD or WLAN) through CAT5. There are two mode option –
100Mbps and 1000Mbps.
Main Features
⚫Complies with IEEE802.3af,IEEE802.3at standard;
⚫Up to maximum output voltage 30 watts;
⚫Auto-detection for IEEE802.3af/at receiving end;
⚫Support 10/100/1000 Base-T application;
⚫Power light, PoE output light;
⚫Maximum transmission distance 100m;
⚫Inserted AC/DC power-no need external power source;
⚫Certificated by CE，FCC，ROSH.
16 Port Gigabit POE Injector
w w w . l e v e l 1 . c o m
POH-1620

Product Application
Product Specifications
Model
POH-1620
Data and Technical Item
Interface
16*10/100/1000Mbps Data-in
16*10/100/1000Mbps PoE-out
Transmission rate
10/100/1000Mbps
Output voltage
52VDC
PoE power
400W
PoE Power Pin
1,2+ / 3,6-
w w w . l e v e l 1 . c o m

Installation
(1) Plug the input power cord into AC input socket.
(2) Connect output signal wire separately.
(3) Tight connection of AC lead-in wire, signal wire, output wire to avoid poor or loose
contact.
Attention 1: The installation of remote power supply should keep away from heat
sources, electromagnetic interference, non-corrosive gases and metal dust.
Attention 2: No blocking to the machine cooling holes.
Attention 3: Smooth placement and no violent vibration when installing.
Attention 4: Attend if the AC input voltage is between 100VAC~160VAC.
Attention 5: During installation, avoid any damage caused by collision and friction with
other equipment.
PoE working mode
Auto-detection of receiving end
Auto-management of power
AC input voltage AC 100 - 160V，50 to 60Hz
Power supply Built-in 400W
LED indicator Power light; PoE output light
Connector Isolation RJ-45，EIA 568A and568B
Protocol Meet IEEE802.3af，IEEE802.3at standard
Environment and Physical Properties
Working temperature -0～40℃
Stocking temperature -40～85℃
Humidity ≤95％(non-condensing)
Weight 5kg
Dimension 440*235*43 mm
Installation 19”Frame
w w w . l e v e l 1 . c o m

happen; After loading, green light indicates at output interface.
(2) If light working, output is ok; if extinct，means there is short circuit and Current
limitation.
(2) After AC power-on, the working lights on front panel indicates.
Daily Maintenance
PoE midspan remote power supply provide continuous working. To get reliable power
supply, must do daily maintenance to get best working status of power system.
(1) Clean up timely, avoid dust accumulation.
(2) Check connection of input/output and replace if there is damage.
w w w . l e v e l 1 . c o m
Boot Testing
(1) Use multimeter resistance gear to detect AC input, should be no short circuit