LevelOne FSW-0507TX User manual

Datasheet_FSW-0507TX
5-port 10/100 Mbps Switch
LevelOne’s FSW-0507TX Fast Ethernet Switch is designed for
easy installation and high performance in an environment where
traffic on the network and the number of user increase
continuoulsy. This switch is equipped with 5 Fast Ethernet ports
and reaching the highest bandwidth up to 200Mbps for each
port to provide workstations with a congestion-free data pipe for
simultaneous access to the server.
This FSW-0507TX combines dynamic memory allocation with a
store-and-forward switching architecture to ensure that the
buffer is effectively allocated for each port. It also controls the
data flow between transmit and receive nodes to guarantee
against all possible packet loss. With Auto-MDIX function for
each port, this switch is expandable by cascading two or more
switches together by uplinking directly without cable selection
hassle.
The switch with small and compact size is specially designed to
fit in space-limited locations and for small to middle workgroup.
With the accessory kits, the device can be standable on the
desk or mounted on the wall. Users can immediately access
any of the features of this product simply by attaching the cables
and turning on the power. For instant error detection, the switch
is equipped with a full range of LEDs to help you monitor and
troubleshoot problems on your network.
FSW-0507TX
Key Features
 5-port 10/100 Mbps Gigabit Switch
 Complies with IEEE 802.3, 802.3u and 802.3x
 Supports Nway auto-negotiation for speed and
duplex modes for each port
 Auto MDIX function for unlinking at each port
 Store-and-Forward switching architecture
 Front-panel diagnostic LEDs
 IEEE 802.3x flow control for full-duplex
 Back pressure flow control for half-duplex
Standable Wall-Mountable

Datasheet_FSW-0507TX
Technical Specification
 Standards Compliance
IEEE 802.3: 10 BASE-T
IEEE 802.3u: 100 BASE-TX
IEEE 802.3 Nway Auto-negotiation
 Ports
5 x RJ-45 10/100Mbps ports
 Protocol
CSMA/CD
 Switching Method
Store-and-Forward switching architecture
 Data Transfer Rate
Ethernet: 10Mbps half duplex, 20 Mbps full duplex
Fast Ethernet: 100Mbps half duplex, 200 Mbps full duplex
 Cabling
Ethernet: 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm
Fast Ethernet: 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm
 Flow Control
IEEE802.3x for full-duplex
Back-Pressure for half-duplex
 MAC Address Table
4K entries per device
 Packet Buffer
128KB per device
 LEDs
Per Device: Power
Per Port: 100Mbps, Link/Act,
 Power Supply
External power DC7.5V/1A
 Power Consumption
7.5 Watts (max)
 Temperature
Operating: 0°C ~40°C
Storage: -20°C ~70°C
 Humidity
Operating: 5% ~ 90% Non-Condensing
 Dimension
131.5mm(L) * 71.5mm(W) * 32mm(H)
 EMI and Safety
FCC class B, CE Mark B, VCCI-B
Product Diagram
Ordering Information
 GSW-0507TX: 5-port 10/100Mbps Switch