LevelOne WGR-6013 User manual

LevelOne
WGR-6013
300Mbps Wireless Gigabit Router
Quick Installation Guide

Default Settings
IP Address 192.168.1.1
Password admin
Wireless Mode Enable
Wireless SSID LevelOne
Security None
This Quick Installation Guide only describes the most basic
situations and settings. All detailed information is described in the
user manual.

Package Contents
•WGR-6013
•Power Adapter
•RJ-45 Cable
•CD-ROM with Manual and QIG
•Quick Installation Guide
•Antenna x2 (for detachable only)
If any of the above items are missing, please contact your retailer
or distributor.
(Figure 1)
Reset Status LED WAN LED WiFi LED LAN LED WPS/Wiless On

Other LED indicator:
LED status Description
Status Green in flash Device status is working.
WAN LED Green RJ45 cable is plugged
Green in flash Data access
LAN LED Green RJ45 cable is plugged
Green in flash Data access
WiFi LED
Green WLAN is on
Green in flash Data access
Green in fast flash Device is in WPS PBC mode
Green in dark Wi-Fi Radio is disabled
Power JACK
WAN PORT
LAN PORT

(Figure 2)
(Figure 3)
(Figure 4)

(Figure 5)

Installation (Figure 1)
1. Please connect the WGR-6013 to the RJ-45 Ethernet Port of
your PC. Then Power-On the WGR-6013.
2. Installation is now completed. You can now begin to
configure the device.
Check Your Network Settings to login web UI (Figure 2)
1. Please make sure your PC can get IP address automatically,
so the router can communicate with your PC during
configuration.
Select “Control Panel” > “Network Connections”.
Right click the “Local Area Connection” and choose
“Properties”.
Select the TCP/IP protocol for your network card.
Click on the Properties button. You should then see the
following screen and make sure you have selected “Obtain
IP address automatically”
Before you begin, please have your ISP‟s username and
password details ready.
English

Configuration
1. Start your WEB browser (Internet Explorer recommended).
In the Address box, enter the following:
http://192.168.1.1 (Figure 3)
2. When prompted, use the following password.
Password: admin (Figure 4)
3. The first time you connect to the WGR-6013, you should run
the Setup Wizard to configure the Internet Connection.
Select Wizard and click Next.(Figure 5)
This wizard will guide you through the setup in 5 easy steps.
Note: For effective wireless security, LevelOne recommends
WPA2-PSK encryption methods.