Levoit LV-H133 User manual

Tower True HEPA Air Purifier
Model: LV-H133
Questions or Concerns?
[email protected]
USER MANUAL
EN DE

2
Package Contents
Specifications
Safety Information
Getting to Know Your Air Purifier
Controls
Getting Started
Using Your Air Purifier
About the FIlter
Care & Maintenance
Troubleshooting
Warranty Information
Customer Support
3
3
4
5

8
9
11
12
15
17
17
EN Table of Contents
DE Inhaltsverzeichnis
ES
FR
IT
Español
Français
Italiano
Lieferumfang
Technische Daten
Sicherheitshinweise
Ihr Luftreiniger
Bedienungstasten
Erste Schritte
Der Gebrauch Ihres Luftreinigers
Der Filter
Pflege und Wartung
Problemlösung
Garantie
Kundendienst
18
18
19
21

24
25
27
28
31
33
33

3
EN
Thank you for purchasing the
TOWER TRUE HEPA AIR
PURIFIER BY LEVOIT.
xAir Purifier
xTrue HEPA Combination Filter
(Pre-Installed)
xUser Manual
1
1
1
Power Supply AC 220–240V, 50/60Hz
Rated Power 33W
Eective
Range
≤ 50 m² / 538 ft²
Operating
Conditions
Temperature:
-10°–40°C / 14°–104°F
Humidity: ≤ 85% RH
Noise Level 25–50dB
CADR (Clean
Air Delivery
Rate)
400 m³/h / 235 CFM
Standby
Power
< 0.8W
Dimensions 31.8 x 31.8 x 60 cm /
12.5 x 12.5 x 23.6 in
Weight 9.5 kg / 21 lb
If you have any questions or concerns, please
reach out to us at [email protected].
We hope you enjoy your new air purifier!
Find Us Online
Search for @LevoitUK on social media for
tips, special deals, giveaways, inspiration,
and more.
Package Contents Specifications
English
User Manual
Tower True HEPA Air Purifier
Model: LV-H133

4
EN
SAFETY INFORMATION
• Only use your air purifier as described
in this manual.
• Do not use your air purifier outdoors.
• Keep your air purifier away from water,
and wet or damp areas. Never place in
water or other liquids.
• Keep your air purifier away from heat
sources.
• Do not use where combustible gases,
vapours, metallic dust, aerosol (spray)
products, or fumes from industrial oil are
present.
• Keep 1.5 m / 5 ft away from where
oxygen is being administered.
• Supervise children when they are near
the air purifier.
• Do not place anything into any opening
on the air purifier.
• Do not sit or place heavy objects on the
air purifier.
• Keep the inside of the air purifier dry.
To prevent moisture buildup, avoid
placing in rooms with major temperature
changes.
• Always unplug your air purifier before
servicing (for example, changing the
filter).
To reduce the risk of fire, electric shock, or other injury, follow all instructions and
safety guidelines.
General Safety
• Keep the air purifier near the outlet it is
plugged into.
• Never place the cord near any heat
source.
• Do not cover the cord with a rug,
carpet, or other covering. Do not place
the cord under furniture or appliances.
• Keep the cord out of areas where
people walk often. Place the cord
where it will not be tripped over.
Power and Cord
READ AND
SAVE THESE
INSTRUCTIONS
• Do not use your air purifier if it is
damaged or not working correctly, or if
the cord or plug is damaged. Do not try
to repair it yourself. Contact Customer
Support (see page 17).
• WARNING: Do not use this air purifier
with solid-state speed controls (such as
a dimmer switch).
• Not for commercial use. Household use
only.

5
EN
GETTING TO KNOW YOUR AIR PURIFIER
A. LED Display / Control Panel
B. Air Outlet
C. Housing
D. Power Cord
E. Air Intake
(triangles at the bottom)
Front Back
A
C
D
B
E
F
G
H
I J
Function Diagram
F. Air Quality Sensor
G. Air Quality Sensor Cover
H. Safety Trigger
I. Filter
J. Filter Cover

6
EN
A. Fan Speed Button
B. Auto Mode Button
C. Sleep Mode Button
D. Display O Button
E. Check Filter Indicator
A F
G
H
B E
C D
J
I
LED Display
GETTING TO KNOW YOUR AIR PURIFIER (CONT.)
F. Timer Button
G. Power Button
H. Air Quality Indicator
I. Timer Display
J. Fan Speed Indicator

7
EN
CONTROLS
On/O Button
Turns the air purifier on/o.
Fan Speed Button
Cycles through fan speeds:
low, medium, and high.
Auto Mode Button
Turns Auto Mode on/o
(see page 9).
Sleep Mode Button
Turns Sleep Mode on/o (see
page 10).
Display O Button
• Turns the display o.
• Press any button (except )
to turn the display back on.
Check Filter Indicator
Lights up red to remind you to
check the filter (see page 12).
Timer Button
Sets the timer (see page 10).
Note: If the filter cover is not
closed securely, pressing
this button will cause the air
purifier to beep twice.
Fan Speed
Indicator Fan Speed
Low
Medium
High

8
EN
GETTING STARTED
1. Remove the filter cover. Pull the filter
from the housing. [Figure 1.1]
2. Take the filter out of its plastic
packaging, then reinstall it into the
housing. Make sure the pull tabs on the
filter are facing out. [Figure 1.2]
3. Replace the filter cover by lining up the
cover’s feet with the slots in the bottom
of the housing. [Figure 1.3]
4. Push the cover securely closed.
[Figure 1.4]
Note:
• The air purifier uses a magnetic safety
trigger to make sure that the filter cover
is closed. If plugged in, the air purifier
will chime when the cover is properly
closed. If not properly closed, the air
purifier will not turn on.
• If you are not planning to use the air
purifier for a long period of time, keep
the filter clean by leaving it inside its
plastic packaging until it is ready to be
used.
Figure 1.1 Figure 1.4
Figure 1.2
Figure 1.3

9
EN
Figure 2.1
Figure 2.2
USING YOUR AIR PURIFIER
1. Place the air purifier on a level surface.
[Figure 2.1] Leave 38 cm / 15 in of
clearance on all sides of the purifier.
[Figure 2.2]
2. Plug in. Tap to turn on the air
purifier. The fan will start automatically.
3. Optionally, tap to change fan
speed. You can also select Auto Mode
or Sleep Mode, or set a timer.
a. For best results, or to address a
specific air quality issue such as
smoke, run the air purifier at high
speed for 15–20 minutes before
using a lower speed or Auto Mode.
b. To eectively clean air, keep
windows and doors closed while
the air purifier is on.
4. Tap to turn o the air purifier.
Auto Mode adjusts the fan speed
automatically based on air quality. For
example, if the air quality is bad, the fan will
be set to high speed.
• Tap to turn Auto Mode on/o.
• Tapping or will also exit Auto
Mode.
General Operation
Auto Mode
38 cm /
15 in
Air Quality Indicator Chart
Indicator
Colour Air Quality Fan Speed
Blue Very Good Sleep Mode
Green Good Low
Orange Moderate Medium
Red Bad High
This indicator uses an automatic sensor to
display the air quality. This sensor uses an
infrared light to detect airborne particles
The air purifier will take 30 seconds to
detect the air quality each time it is turned
on. During this time, the air quality indicator
colour will be blue. After 30 seconds, the air
quality indicator colour will change based
on the detected air quality.
Air Quality Indicator

10
EN
As a safety feature, the air purifier will
automatically turn o if the filter cover is
removed.
Note:
• You can change the fan speed at any
time while the timer is counting down.
The timer will work with any mode.
• Pressing or unplugging the air
purifier will cancel the timer.
Note: The air purifier will not remember
timers.
Automatic Shutoff
USING YOUR AIR PURIFIER (CONT.)
Sleep Mode Memory Function
Timer
1. Tap repeatedly (or press and hold
) to set a time.
2. Once you choose a time, the timer will
flash 5 times and start counting down.
3. The air purifier will automatically power
o once the timer is finished.
4. To cancel a timer, tap repeatedly
until the timer reads “- - - -”. The timer
will flash 5 times to confirm cancellation.
Sleep Mode uses the lowest possible fan
speed to operate quietly.
• Tap to turn Sleep Mode on/o.
• Tapping or will also exit Sleep
Mode.
You can set a timer between 1–12 hours.
The air purifier will remember its
programmed settings while turned o and
resume those settings when turned back
on. The air purifier must remain plugged in
for the memory function to work.

11
EN
ABOUT THE FILTER
A. Nylon Pre-Filter
• Captures large particles such as
dust, lint, fibres, hair, and pet fur.
• Maximises the life of the True
HEPA Filter by protecting it.
B. True HEPA Filter
• Removes at least 99.97%
of airborne particles 0.3
micrometres (µm) in diameter.
• Filters small particles such as
mould spores, tiny dust particles,
parts of smoke, and allergens
such as pollen, dander, and
mites.
C. High-Eciency Activated Carbon Filter
• Physically adsorbs smoke,
odours, and fumes.
• Filters compounds such as
formaldehyde, benzene,
ammonia, hydrogen sulphide,
and volatile organic compounds
(VOCs).
The True HEPA Combination Filter uses a 3-stage filtration system to purify air.

12
EN
CARE & MAINTENANCE
Cleaning the Air Purifier
Cleaning the Air Quality Sensor
Resetting the Check Filter
Indicator
Check Filter Indicator
1. Wipe the outside of the air purifier with
a dry cloth. Do not clean with water or
any other liquid, to avoid risk of electric
shock.
2. Clean the outside of the filter with a
brush or vacuum hose each month
to prevent buildup of hair or dust. Do
not clean the filter with water or other
liquids.
Figure 3.1
If the air quality sensor is blocked by
accumulated dust, the air quality indicator
may not work correctly.
Reset the Check Filter Indicator when:
• lights up.
1. Replace the filter (see page 13).
2. Turn on the air purifier.
3. Press and hold for 3 seconds.
4. The light will turn o after the filter
indicator is successfully reset.
• The filter was changed before lit up.
1. Press and hold for 3 seconds.
2. The air purifier will chime after the
filter indicator is successfully reset.
will light up as a reminder to check the
filter. The indicator is automatic. You may not
need to change your filter yet, but you need
to check it when lights up.
1. Unplug the air purifier.
2. Open the sensor cover.
3. Clean the sensor lens with a damp
cotton swab. [Figure 3.1]
4. Dry the sensor lens with a dry cotton
swab.
5. Close the sensor cover.
lens inside
opening Storage
If not using the air purifier for an extended
period of time, wrap the filter in plastic
packaging and store in a dry place to avoid
moisture damage.

13
EN
When Should I Replace the
Filter?
The filter should be replaced every 6–8
months. You may need to replace your filter
earlier or later depending on how often you
use your air purifier. Using your air purifier in
an environment with relatively high pollution
may mean you will need to change the filter
more often, even if is o.
You may need to replace your filter if you
notice:
• Increased noise when the air
purifier is on
• Decreased airflow
• Unusual odours
• A visibly clogged filter
Replacing the Filter
1. Unplug the air purifier, then remove the
filter cover. [Figure 4.1]
Figure 4.1
2. Remove the old filter. [Figure 4.2]
Figure 4.2
unplug
air purifier
CARE & MAINTENANCE (CONT.)
To maintain the performance
of your air purifier, only use
ocial Levoit filters. To buy
replacement filters, scan the QR
code or go to Amazon and search
B07FXB5P8R.

14
EN
3. Clean any dust or dirt from inside the
housing. [Figure 4.3]
CARE & MAINTENANCE (CONT.)
Figure 4.3
Figure 4.5
Figure 4.4
4. Unwrap the new filter and place it into
the housing. Make sure the pull tabs are
facing out. [Figure 4.4]
5. Replace the filter cover onto the
housing. [Figure 4.5]
6. Plug in and turn on the air purifier. Press
and hold for 3 seconds to reset it.
black tabs
facing out

15
EN
Problem Possible Solution
Air purifier will not turn on or
respond to button controls.
Plug in the air purifier.
Check to see if the power cord is damaged. If it is, stop
using the air purifier and contact Customer Support (see
page 17).
Securely close the filter cover so that the safety switch is
activated (see page 8).
Plug the air purifier into a dierent outlet.
Air purifier may be malfunctioning. Contact Customer
Support (see page 17).
Air purifier makes an unusual
noise when the fan is on.
Make sure the filter is properly in place with plastic
packaging removed (see page 8).
Replace the filter (see page 13).
Air purifier may be damaged, or a foreign object may be
inside. Stop using the air purifier and contact Customer
Support (see page 17). Do not try to repair the air
purifier.
Airflow is significantly
reduced.
Make sure the filter’s plastic packaging is removed.
Tap to increase the fan speed.
Leave at least 38 cm / 15 in of clearance on all sides of the
air purifier.
Replace the filter (see page 13).
Poor air purification quality. Tap to increase the fan speed.
Make sure no objects are blocking the top or sides of the
air purifier for proper airflow.
Close doors and windows while running the air purifier.
Make sure the filter is removed from its plastic packaging
and properly in place (see page 8).
Make sure the room is smaller than ≤ 50 m² / 538 ft². The
air purifier may not be as eective in larger rooms.
Replace the filter (see page 13).
TROUBLESHOOTING

16
EN
If your problem is not listed, please contact Customer Support (see page 17).
TROUBLESHOOTING (CONT.)
Problem Possible Solution
The air purifier is producing
an unpleasant odour.
Replace the filter (see page 13).
Make sure that the air purifier is in a room where the
relative humidity is less than 85% RH. Higher humidity
levels may cause mildew to grow on the filter.
is still illuminated after
replacing the filter. Reset (see page 12).
has not turned on within
8 months.
is a reminder for you to check the filter and will light
up based on how much the air purifier has been used
(see page 12). If you don’t use your air purifier often,
will take longer to turn on.
turned on before 6
months.
is a reminder for you to check the filter and will light
up based on how much the air purifier has been used
(see page 12). If you run your air purifier frequently,
will turn on sooner.

17
EN
WARRANTY INFORMATION
Terms & Policy
Arovast Corporation warrants all products
to be of the highest quality in material,
craftsmanship, and service for 2 years,
eective from the date of purchase to the end
of the warranty period. Warranty lengths may
vary between product categories. Should you
encounter any issues or have any questions
regarding your new product, feel free to
contact our helpful Customer Support Team.
CUSTOMER SUPPORT
Arovast Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
USA
Email: [email protected]
* Please include your order ID when
contacting customer support.

18
DE
Vielen Dank, dass Sie sich für den
TOWER TRUE HEPA
LUFTREINIGER VON
LEVOIT entschieden haben.
Bei Fragen oder Problemen wenden Sie sich
bitte an [email protected].
Wir hoen, dass Sie Freude an Ihrem neuen
Luftreiniger haben!
Sie können uns auch online
finden
Lieferumfang Technische Daten
Deutsche
Bedienungsanleitung
Tower True HEPA Luftreiniger
Modell: LV-H133
Luftreiniger
True HEPA Kombinationsfilter (vorinstalliert)
Bedienungsanleitung
1
1
1
Stromversorgung AC 220–240V,
50/60Hz
Leistung 33 W
Wirkungsbereich ≤ 50 m² / 538 ft²
Betriebsbedingungen Temperatur:
-10°–40°C / 14°–104°F
Luftfeuchtigkeit:
≤85% RH
Lärmpegel 25–50 dB
CADR (Clean Air
Delivery Rate,
Wirkungsgrad)
400m³/h / 235CFM
Standby-
Stromverbrauch
< 0,8W
Abmessungen 31,8x31,8x60cm /
12,5x12,5x23,6Zoll
Gewicht 9,5kg / 21lb
Suchen Sie in den sozialen Medien
nach @LevoitGermany, um Tipps,
Sonderangebote, Werbegeschenke,
Inspiration und vieles mehr zu finden.

19
DE
SICHERHEITSHINWEISE
• Verwenden Sie diesen Luftreiniger
ausschließlich wie in diesem Handbuch
beschrieben.
• Verwenden Sie den Luftreiniger nicht
im Freien.
• Halten Sie den Luftreiniger von Wasser
und Nässe fern. Stellen Sie den
Luftreiniger keinesfalls in Wasser oder
andere Flüssigkeiten.
• Halten Sie Ihren Luftreiniger von
Wärmequellen fern.
• Verwenden Sie den Luftreiniger nicht
an Orten, an denen brennbare Gase,
Dämpfe, Metallstaub, Aerosol-Produkte
(Sprühdosen) oder Dämpfe von
Industrieölen vorhanden sind.
• Halten Sie den Luftreiniger 1,5m /
5Fuß von Bereichen fern, an denen
Sauersto zugeführt wird.
• Lassen Sie Kinder in der Nähe des
Luftreinigers nicht unbeaufsichtigt.
• Führen Sie nichts in die Önungen des
Luftreinigers ein.
• Setzen Sie sich nicht auf den
Luftreiniger und stellen Sie keine
schweren Gegenstände darauf ab.
Befolgen Sie sämtliche Anweisungen und Sicherheitshinweise, um das Risiko von
Brand, Stromschlägen und sonstigen Verletzungen zu reduzieren.
Allgemeine Sicherheit
• Halten Sie das Innere des Luftreinigers
trocken. Stellen Sie den Luftreiniger
nicht in Räumen mit großen
Temperaturschwankungen auf, um
ein Ansammeln von Feuchtigkeit zu
vermeiden.
• Ziehen Sie vor dem Durchführen von
Wartungsarbeiten (beispielsweise das
Auswechseln des Filters) stets den
Stecker.
• Benutzen Sie Ihren Luftreiniger
nicht, wenn er beschädigt ist oder
nicht ordnungsgemäß funktioniert
oder wenn der Stecker oder das
Kabel beschädigt sind. Versuchen
Sie nicht, den Luftreiniger selbst zu
reparieren. Wenden Sie sich an unseren
Kundendienst (siehe Seite 33).
• WARNUNG: Dieser Luftreiniger
darf nicht mit einer Solid-State-
Steuerung wie beispielsweise einem
Dimmerschalter verwendet werden.
• Nicht für den gewerblichen Gebrauch.
Nur für den Hausgebrauch.

20
DE
• Stellen Sie den Luftreiniger in der Nähe
der verwendeten Steckdose auf.
• Halten Sie das Kabel stets von
Wärmequellen fern.
• Bedecken Sie das Kabel nicht mit
einem Vorleger, Teppich oder sonstigem
Belag. Verlegen Sie das Kabel nicht
unter Möbeln oder Geräten.
• Verlegen Sie das Kabel nicht auf häufig
begangenen Wegen. Achten Sie darauf,
dass das Kabel keine Stolperfalle
darstellt.
Steckdose und Kabel
LESEN SIE DIESE ANLEITUNG
BITTE SORGFÄLTIG UND
BEWAHREN SIE SIE AUF.
SICHERHEITSHINWEISE (FORTS.)