Lex 2I847PW User manual

2I847PW
Intel Ivy Bridge Celeron 1047UE (i3 / i7) Processor,
On Board 4GB DDR3 1333 MT/s,
2 x LAN, 2 x HDMI, USB, 2 x COM, 1 x VGA
All-In-One
Intel Mobile Ivy Bridge Celeron 1047UE 1.4GHz CPU, (i3 / i7 processor)
VGA, HDMI, PCIe mini card, PCIe, 160-pin connector
Multi-LAN Board, USB, Multi-COM
NO. 2I847PW_V0.2
Release date: JUN. 30. 2017

i
2I847PW
Warning!...........................................................................................................................
Hardware Notice Guide .............................................................................................
CHAPTER 1 GENERAL INFORMATION ........................................................................
1-1 MAJOR FEATURE........................................................................................................
1-2 SPECIFICATION ..........................................................................................................
1-3 INSTALLING THE MINI PCI-E CARD ..........................................................................
CHAPTER 2 HARDWARE INSTALLATION ....................................................................
2-1 UNPACKING PRECAUTION ........................................................................................
2-2 UNPACKING CHECKUP ..............................................................................................
2-3 DIMENSION-2I847PW .................................................................................................
2-4 LAYOUT-2I847PW-TOP................................................................................................
2-4-1 LAYOUT-2I847PW-BOT ...........................................................................................
2-5 FUNCTION MAP-2I847PW ..........................................................................................
2-6 DIAGRAM-2I847PW-TOP ............................................................................................
2-6-1 DIAGRAM-2I847PW-BOT .........................................................................................
2-7 LIST OF JUMPERS ......................................................................................................
2-8 JUMPER SETTING DESCRIPTION ............................................................................
2-9 JSB12: COMS DATA SET ............................................................................................
2-10 JSC1 / JSC2: COM1 / COM2 RS232 / RS422 / RS485 SELECT ................................
CHAPTER 3 CONNECTION ..........................................................................................
3-1 LIST OF CONNECTORS..............................................................................................
3-2 2 x 40 PIN 2.00mm MALE ............................................................................................
3-3 BATTERY INPUT .........................................................................................................
3-4 DC VOLTAGE OUTPUT................................................................................................
3-5 DIGITAL INPUT / OUTPUT / WATCH DOG TIME ........................................................
3-5-1 IO DEVICE: F75111 UNDER DOS............................................................................
3-5-2 IO DEVICE: F75111 UNDER WINDOWS ..................................................................
3-5-3 IO DEVICE: F75111 VB6 UNDER WINDOWS ..........................................................
3-5-4 IO DEVICE: F75111 UNDER LINUX .........................................................................
3-6 I2C BUS ........................................................................................................................
3-7 SATA PORT ..................................................................................................................
3-8 MINI CARD ..................................................................................................................
CHAPTER 4 INTRODUCTION OF BIOS ........................................................................
4-1 ENTER SETUP ............................................................................................................
4-2 BIOS MENU SCREEN .................................................................................................
4-3 FUNCTION KEYS ........................................................................................................
4-4 GETTING HELP ...........................................................................................................
4-5 MENU BARS ................................................................................................................
Contents
1
2
4
5
6
7
8
8
9
10
11
12
13
14
15
16
16
17
18
19
19
20
23
23
24
25
27
33
37
42
42
43
44
44
45
45
46
46

ii
47
48
49
50
51
52
53
54
55
55
56
57
57
58
58
59
60
61
62
63
64
65
65
66
67
68
69
70
71
72
74
76
78
79
81
83
85
86
87
4-6 MAIN ............................................................................................................................
4-7 ADVANCED ..................................................................................................................
4-7-1 ACPI SETTINGS .......................................................................................................
4-7-2 S5 RTC WAKE SETTINGS .......................................................................................
4-7-3 CPU CONFIGURATION ............................................................................................
4-7-4 SATA CONFIGURATION ..........................................................................................
4-7-4-1 SATA MODE SELECTION-AHCI MODE ...............................................................
4-7-5 USB CONFIGURATION ............................................................................................
4-7-6 SMART SETTINGS ...................................................................................................
4-7-7 F71869 SUPER IO CONFIGURATION .....................................................................
4-7-7-1 SERIAL Port 1 CONFIGURATION .........................................................................
4-7-7-2 SERIAL Port 2 CONFIGURATION .........................................................................
4-7-8 F17869 H/W MONITOR ............................................................................................
4-7-9 SERIAL PORT Console Redirection .........................................................................
4-7-10 NETWORK STACK .................................................................................................
4-8 CHIPSET ......................................................................................................................
4-8-1 PCH-IO CONFIGURATION .......................................................................................
4-8-1-1 PCI EXPRESS CONFIGURATION ........................................................................
4-8-1-1-1 MINI PCIe 1/2 .....................................................................................................
4-8-1-2 USB CONFIGURATION .........................................................................................
4-8-1-2-1 xHCI MODE ........................................................................................................
4-8-1-3 PCH AZALIA CONFIGURATION ............................................................................
4-8-2 SYSTEM AGENT (SA) CONFIGURATION ...............................................................
4-8-2-1 GRAPHICS CONFIGURATION .............................................................................
4-8-2-1-1 LCD CONTROL ..................................................................................................
4-9 Boot ..............................................................................................................................
4-9-1 CSM PARAMETERS .................................................................................................
4-10 SECURITY .................................................................................................................
4-11 SAVE & EXIT ..............................................................................................................
CHAPTER 5 DRIVER INSTALLATION ...........................................................................
5-1 INF INSTALL INTEL BAYTRAIL CHIPSET DRIVER ....................................................
5-2 VGA INSTALL INTEL BAYTRAIL VGA DRIVER............................................................
5-3 SOUND INSTALL REALTEK HIGH DEFINITION AUDIO DRIVER ..............................
5-4 USB 3.0 INSTALL INTEL USB 3.0 EXTENSIBLE HOST CONTROLLER DRIVER .....
5-5 ME INSTALL INTEL MANAGEMENT ENGINE INTERFACE DRIVER .........................
5-6 HOW TO UPDATE AMI BIOS .......................................................................................
5-7 HOW TO UPDATE INSYDE BIOS ................................................................................
APPENDIX A:POWER CONSUMPTION TEST .................................................................
APPENDIX B:RESOLUTION LIST .....................................................................................

Copyright
This manual is copyrighted and all rights are reserved. It does not allow any non
authorization in copied, photocopied, translated or reproduced to any electronic or
machine readable form in whole or in part without prior written consent from the
manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special, incidental
or consequential damages arising from the use of inability to use the product or
documentation, even if advised of the possibility of such damages.
The manufacturer keeps the rights in the subject to change the contents of this
manual without prior notices in order to improve the function design, performance,
quality, and reliability. The author assumes no responsibility for any errors or omissions,
which may appear in this manual, nor does it make a commitment to update the
information contained herein.
Trademarks
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
All other trademarks, products and or product's name mentioned here are for
identification purposes only, and may be trademarks and/or registered trademarks
of their respective companies or owners.
© Copyright 2017
All Rights Reserved.
User Manual edition 0.1, JUN. 30. 2017

1
Warning !
1. Battery
Batteries on board are consumables.
The life time of them are not guaranteed.
2. Fless solution with HDD
The specification & limitation of HDD should be considered carefully when
the fanless solution is implemented.
3. We will not give further notification in case of changes of
product information and manual.
4. SATA interface does not support Hot SWAP function.
5. There might be a 20% inaccuracy of WDT at room temperature.
6. Please make sure the voltage specification meets the requirement
of equipment before plugging in.
8. Caution! Please notice that the heat dissipation problem could cause the MB
system unstable. Please deal with heat dissipation properly when
buying single MB set.
9. Please avoid approaching the heat sink area to prevent users from
being scalded with fanless products.
12. It is important to install a system fan toward the CPU to decrease
the possibility of overheating / system hanging up issues,
or customer is suggested to have a fine cooling system to dissipate heat
from CPU.
11. DO NOT apply any other material which may reduce cooling
performance onto the thermal pad.
10. If users repair, modify or destroy any component of product unauthorizedly,
We will not take responsibility or provide warranty anymore.
7. There are two types of SSD, commercial grade and industrial grade, which
provide different read/write speed performance, operation temperature and
life cycle. Please contact sales for further information before making orders.

2
Hardware Notice Guide
1. Before linking power supply with the motherboard, please attach DC-in adapter to
the motherboard first. Then plug the adapter power to AC outlet.
Always shut down the computer normally before you move the system unit or
remove the power supply from the motherboard. Please unplug the DC-in adapter first
and then unplug the adapter from the AC outlet.
Please refer photo 1 as standard procedures.
2. In case of using DIRECT DC-in (without adapter), please check the allowed range
for voltage & current of cables. And make sure you have the safety protection for
outer issues such as short/broken circuit, overvoltage, surge, lightning strike.
3. In case of using DC-out to an external device, please make sure its voltage and
current comply with the motherboard specification.
4. The total power consumption is determined by various conditions
(CPU/motherboard type, device, application, etc.). Be cautious to the power cable
you use for the system, one with UL standard will be highly recommended.
5. It’s highly possible to burn out the CPU if you change/ modify any parts of
the CPU cooler.
6. Please wear wrist strap and attach it to a metal part of the system unit
before handling a component. You can also touch an object which is
ground connected or attached with metal surface if you don't have wrist strap.
7. Please be careful to handle & don't touch the sharp-pointed components on
the bottom of PCBA.
8. Remove or change any components form the motherboard will VOID the warranty of
the motherboard.
9. Before you install/remove any components or even make any jumper setting
on the motherboard, please make sure to disconnect the power supply first.
(follow the aforementioned instruction guide)
10. "POWERON after PWR-Fair" function must be used carefully as below:
When the DC power adaptor runs out of power, unplug it from the DC current;
Once power returns, plug it back after 5 seconds.
If there is a power outage, unplug it from the AC current, once power returns,
plug it back after 30 seconds. Otherwise it will cause system locked or made
a severe damage.
Remark 1:
Always insert / unplug the DC-in horizontally & directly to / from the motherboard.
DO NOT twist, it is designed to fit snugly.
Moreover, erratic pull / push action might cause an unpredictable damage to the
component & system unit.
*

3
2
1
3
1
2
3
Photo 1 Insert
Unplug

4
Chapter-1
General Information
The 2I847PW is a 2.5 inches form factor with LEX PICO Express® technology (160-pin
expansion connectors) SBC Board. LEX PICO Express® is a board-to-board expansion
capability provides cableless system and project-oriented IO options. 2I847PW's PICO
Express® design & Evaluation carrier boards is also the ideal solution for embedded
application developers to get up and running quickly on their customized carrier boards for
different OEM / ODM projects.
The 2I847PW SBC board is with Intel Ivy Bridge 1047 / i7 ultra-low voltage processor
paired with HM76 chipset and 4G DDR3 memory onboard. The 2I847PW integrates with
Intel® HD graphics engine to support DX11, DX10.1, DX10, DX9, CRT / DVI / HDMI 1.3a.
This integrated platform offers superb performance and PC specification in the industry.
Despite the limited space of 2I847PW, it supports 2 COM ports, 1 port USB 3.0 and 5 ports
of Hi-Speed USB 2.0 to enhance the host controller interface which will ensure the high
performance level and flexible expansion. The 2I847PW supports two LAN ports of 10 /
100 / 1G Ethernet for various and seamless broadband connectivity. With Wake-On LAN
function and the PXE function in BIOS, these are perfect control boards for networking
devices. The expendable interfaces include one full size PCIe Mini card for PCIe and USB
interface, one full size PCIe Mini card for mSATA, PCIe and USB interface
2I847PW's PICO Express® design & Evaluation carrier boards is also the ideal solution for
embedded application developers to get up and running quickly on their customized carrier
boards for different OEM / ODM projects.

5
1. Intel® Celeron® Processor 1047UE (2M Cache, 1.40 GHz) / Intel® Core™ i7-3517UE
Processor (4M Cache, up to 2.80 GHz) with integrated GPU
2. Intel® HM76 Express Chipset
3. On board DDR3 4GB memory, data transfer rate of 1333MT/s / 1600MT/s
4. Support 2 x 10 / 100 / 1000 Mbps Intel LAN ports
5. Support DX11, DX10.1, DX10, DX9, and OGL 3.0
6. Support two channel HD audio
7. Support 2 x COM ports 1 x USB3.0 and 5 x USB 2.0
8. Support extended 2 x Mini PCIe card (2 x full size)
9. Support one SATA connector SATA 3.0 Data transfer rates up to 6.0 Gb/s (600 MB/s)
10. Hardware digital Input & Output, 4 x DI / 4 x DO
Hardware Watch Dog Timer, 0~255 sec programmable
11. On board DC +9V~36V
12. PCB Dimension: 102 x 73 mm (2.5 inch)
13. Display interfaces include VGA & HDMI
1-1 Major Feature

6
1. CPU: Intel® Celeron® Processor 1047UE (2M Cache, 1.40 GHz) / Intel® Core™ i7-
3517UE Processor (4M Cache, up to 2.80 GHz)
2. PCH chipset: Intel® Panther Point HM76
3. Memory: DDR3 4GB Memory, data transfer rate of 1333MT/s / 1600MT/s
4. Expansion Function
1-2 Specification
PICO Express® 80-pin connector A
COM: 1 x RS232 or RS422 or RS485
USB: 4 x USB 2.0, 1 x USB 3.0
PS2: KB / MS
Expansion: 1 x PCIe
LED: HDD or LAN or Power LED
Switch: Power / Reset
PICO Express® 80-pin connector B
Power: Wide Range DC-IN +9~36V
Display: 1 x HDMI & 1 x VGA
USB: 2 x USB 2.0
Audio: Line-out / Mic-in
COM: 1 x RS232 or RS422 or RS485
LAN: 2 x Intel 10 / 100 / 1000 Mbps
5. SATA: One SATA ports 3.0 Data transfer rates up to 6.0 Gb/s (600 MB/s)
6. Sound: HD Audio Specification 1.0 Two channel sound chipset
7. WDT / DIO: Hardware digital Input & Output, 4 x DI / 4 x DO
Hardware Watch Dog Timer, 0~255 sec programmable
8. Expansion interface: one full size PCIe Mini card for PCIe and USB interface,
one Full size PCIe Mini card for mSATA, PCIe and USB interface,
9. BIOS: AMI UEFI BIOS
10. Dimension: 102 x 73 mm (2.5 inch)
11. Power: On board DC +9V~36V

7
1-3 Installing the Mini PCI-e Card
1. Unfasten the round-headed M2*6
screw for half size Mini PCI-e.
3. Fasten a round-headed M2*6 screw.
2. Install a mSATA card at the angle of 45°.
(The half size Mini PCI-e slot supports mSATA)

8
Chapter-2
This chapter provides the information how to install the hardware of 2I847PW.
2-1 and 2-2 to check the delivery package and unpack carefully. Please follow the jumper
setting procedure.
You should follow these
steps to protect the board from the static electric
discharge whenever you handle the board:
1. Ground yourself by a grounded wrist strap at all times when you handle the 2I847PW.
Well secure the ALLIGATOR clip of the strap to the end of the shielded wire lead from
a grounded object. Please put on and connect the strap before handling the
2I847PW for harmlessly discharge any static electricity through the strap.
2. Please use anti-static pad to put any components, parts, or tools on the pad whenever
you work on them outside the computer. You may also use the anti-static bag instead of
the pad. Please ask your local supplier for necessary parts on anti-static requirement.
3. Do not plug any connector or set any jumper when the power is on.
Hardware Installation
2-1 Unpacking Precaution
NOTE!
1. Do not touch the board or any other sensitive components without all necessary
anti-static protection.
2. Please pay attention to the voltage limitation of DC-IN12V 5%.
Overuse of DC-IN voltage limitation or change to another power adapter
(not provided with this system) will VOID warranty.

9
First of all, please follow all necessary steps of section 2-1 to protect 2I847PW from
electricity discharge.
1. Unpack the 2I847PW board and keep all packing material,
manual and driver disc etc, do not dispose !
2. Is there any components lose or drops from the board?
DO NOT CONTINUE TO INSTALL THIS BOARD!
CONTACT THE DEALER YOU PURCHASED
THIS BOARD FROM, IMMEDIATELY.
3. Is there any visible damage on the board?
DO NOT CONTINUE TO INSTALL THIS BOARD!CONTACT
THE DEALER YOU PURCHASED THIS BOARD FROM, IMMEDIATELY.
4. Check your optional parts (i.e. DDR, CF etc.), all necessary jumpers
setting to jumper pin-set, and CMOS setup correctly.
Please also refer to all information of jumper settings in this manual.
5. Check your external devices (i.e. Add-On-Card, Driver Type etc.)
for complete add-in or connection and CMOS setup correctly.
Please also refer to all information of connector connection in this manual.
6. Please keep all necessary manual and driver disc in a good condition for future
re-installation if you change your Operating System.
2-2 Unpacking checkup

10
2-3 Dimension-2I847PW

11
2-4 Layout-2I847PW
CPH2
CPH1
JSC1
JSC2
CPO1
CO1
CIO1
CBAT1
JSB12
MPCE1
MPCE2
TOP

12
2-4-1 Layout-2I847PW
SATA1
BOT

13
2-5 Funtion Map-2I847PW
mSATA/HDD
auto detect
mSATA/
PCIe/
USB
SM BUS
COM1/2
RS232/RS422/RS485
select Jumper
Secondary RTC
4DI/4DO
+5V/+12V
Clear
CMOS/ME
Jumper
LAN x 2
COM1
COM2NC NC
VGA
HDMI
DC-IN Audio
USB 2.0 x 2
USB 2.0 x 2
USB 2.0 x 2
USB 3.0
PS2
KB/MS
Front Panel
PCIe x 1

14
2-6 Diagram- 2I847PW
CPH2
CPH1
JSC1
JSC2
CPO1
CO1
CIO1
CBAT1
JSB12
MPCE1
MPCE2
TOP

15
2-6-1 Diagram- 2I847PW
BOT
SATA1

16
JSB12: CMOS and ME RTC clear select
JSC1 / JSC2: COM1 / COM2 RS232 / RS422 / RS485 select
2-7 List of Jumpers
2-8 Jumper Setting Description
A jumper is ON as a closed circuit with a plastic cap covering two pins. A jumper is OFF
as an open circuit without the plastic cap. Some jumpers have three pins, labeled 1, 2,
and 3. You could connect either pin 1 and 2 or 2 and 3.
The below figure 2.2 shows the examples of different jumper settings in this manual.
All jumpers already have its default setting with the plastic cap inserted as ON,
or without the plastic cap as OFF. The default setting may be referred in this
manual with a " * " symbol .
Figure 2.2