Lex 3I380D-D90 User manual

3I380D
Intel Bay Trail-I E3815 (Single Core) /
Intel Bay Trail-D J1900 (Quad Core) CPU, On Board /
Socket DDR3L, 4 x Intel I211AT LAN / USB / VGA / HDMI
All-In-One
Intel Bay Trail-I E3815 1.46 GHz / Intel Bay Trail-D J1900 2.0GHz
VGA, HDMI, COM, PCIe mini card
Multi-LAN Board , SATA, USB
NO. 3I380D_V0.1
Release date: Nov. 21. 2014

i
3I380D
Warning!...................................................................................................................................
Hardware Notice Guide ......................................................................................................
CHAPTER 1 GENERAL INFORMATION .................................................................................
1-1 MAJOR FEATURE................................................................................................................
1-2 SPECIFICATION ..................................................................................................................
1-3 INSTALLING THE SO-DIMM (FOR 3I380D-D90) .................................................................
1-3-1.1 REMOVING THE SO-DIMM (FOR 3I380D-D90) ............................................................
1-4 DIRECTIONS FOR INSTALLING THE MINI CARD .............................................................
1-5 PACKING LIST (FOR 3I380D-D90) ......................................................................................
1-5-1 PACKING LIST (FOR 3I380D-I12) ....................................................................................
CHAPTER 2 HARDWARE INSTALLATION ............................................................................
2-1 UNPACKING PRECAUTION ................................................................................................
2-2 UNPACKING CHECKUP ......................................................................................................
2-3 DIMENSION (3I380D) ..........................................................................................................
2-4 LAYOUT (3I380D) ................................................................................................................
2-5 DIAGRAM (3I380D-D90) ......................................................................................................
2-5-1 BOTTOM SIDE DIAGRAM (3I380D-D90) .........................................................................
2-5-2 DIAGRAM (3I380D-I12) ....................................................................................................
2-5-3 BOTTOM SIDE DIAGRAM (3I380D-I12) ...........................................................................
2-6 INSTALL MEMORY ..............................................................................................................
2-7 LIST OF JUMPERS ..............................................................................................................
2-8 JUMPER SETTING DESCRIPTION .....................................................................................
2-9 COMS DATA CLEAR ............................................................................................................
2-10 JSC2: COM2 RS422/RS485 SELECT (OPTION) ...............................................................
CHAPTER 3 CONNECTION ..................................................................................................
3-1 LIST OF CONNECTORS.......................................................................................................
3-2 DC POWER INPUT ..............................................................................................................
3-3 BATTERY INPUT ..................................................................................................................
3-4 DC POWER OUTPUT ..........................................................................................................
3-5 FRONT PANEL & FAN ..........................................................................................................
3-6 DISPLAY INTERFACE .........................................................................................................
3-7 AUDIO INTERFACE (OPTION) ............................................................................................
3-8 I/O INTERFACE ....................................................................................................................
3-9 DIGITAL INPUT / OUTPUT (OPTION) ..................................................................................
3-10 I C Bus Interface .................................................................................................................
3-11 PS2 KB/MS (OPTION) ........................................................................................................
3-12 LAN INTERFACE ...............................................................................................................
3-13 USB INTERFACE ..............................................................................................................
Contents
1
2
4
5
6
7
9
10
11
12
13
13
14
15
16
17
18
19
20
21
22
22
23
24
25
25
26
27
27
28
29
30
30
32
33
33
33
34
2

ii
3-14 SATA INTERFACE .......................................................................................................................
3-15 MICROSD CARD INTERFACE (SOCKET PUSH-PUSH) (OPTION) ..........................................
3-16 MODULE SOCKET ......................................................................................................................
3-17 SIM SOCKET ...............................................................................................................................
3-18 SODIMM SOCKET (OPTION) .....................................................................................................
3-19 CONNECTOR WAFER OF COMPATIBLE BRAND AND PART NUMBER LIST .........................
CHAPTER 4 INTRODUCTION OF BIOS ..........................................................................................
4-1 ENTER SETUP ..............................................................................................................................
4-2 BIOS MENU SCREEN & FUNCTION KEYS .................................................................................
4-3 GENERAL HELP ...........................................................................................................................
4-4 MENU BARS .................................................................................................................................
4-5 MAIN ..............................................................................................................................................
4-6 ADVANCED ...................................................................................................................................
4-6-1 BOOT CONFIGURATION ...........................................................................................................
4-6-2 PCI EXPRESS CONFIGURATION .............................................................................................
4-6-2-1 PCI EXPRESS ROOT PORT 1/2/3/4 ......................................................................................
4-6-2-2 PCIE PORT 1/2/3/4 SPEED ....................................................................................................
4-6-2-3 PCIE PORT 1/2/3/4 OPTION ROM .........................................................................................
4-6-3 USB CONFIGURATION .............................................................................................................
4-6-4 VIDEO CONFIGURATION ..........................................................................................................
4-6-5 THERMAL CONFIGURATION ....................................................................................................
4-6-6 SATA CONFIGURATION ............................................................................................................
4-6-7 CONSOLE REDIRECTION ........................................................................................................
4-6-8 ACPI TABLE / FETURES CONTROL .........................................................................................
4-7 SECURITY .....................................................................................................................................
4-8 POWER .........................................................................................................................................
4-9 BOOT .............................................................................................................................................
4-9-1 LEGACY .....................................................................................................................................
4-10 EXIT .............................................................................................................................................
4-11 DEVICE MANAGER .....................................................................................................................
4-11-1 SIO FINTEK8180U ...................................................................................................................
CHAPTER 5 DRIVER INSTALLATION ............................................................................................
5-1 INF INSTALL INTEL BAYTRAIL CHIPSET DRIVER (EXAMPLE FOR WIN8 64BIT) ....................
5-2 VGA INSTALL INTEL BAYTRAIL VGA DRIVER (EXAMPLE FOR WIN8 64BIT) ...........................
5-3 SERIAL IO INSTALL DRIVER BAYTRAIL SERIAL IO DRIVER (FOR WINDOWS 7 ONLY) ..........
5-4 XHCI INSTALL INTEL USB 3.0 XHCI DRIVER (FOR WINDOWS 7 ONLY) ..................................
5-5 HD AUDIO INSTALL HIGH DEFINITION AUDIO DRIVER (EXAMPLE FOR WIN 64BIT) .............
5-6 MBI INSTALL INTEL MBI DRIVER (FOR WIN 8/8.1 ONLY) ..........................................................
5-7 TXE LNSTALL INTEL TXE DRIVER ...............................................................................................
5-7-1 TXE INSTALL FOR WIN8/WIN8.1 ..............................................................................................
5-7-2 TXE INSTALL FOR WIN7 ...........................................................................................................
36
36
37
38
38
39
40
40
41
42
42
43
44
45
46
47
48
49
50
51
53
54
55
56
57
58
59
60
62
63
64
66
68
70
72
74
76
77
79
79
81

iii
5-8 HOW TO UPDATE AMI BIOS .........................................................................................................
APPENDIX A:POWER CONSUMPTION TEST ..................................................................................
APPENDIX B:RESOLUTION LIST .......................................................................................................
APPENDIX C: F75111N I C DIO DECICE ............................................................................................
1-1 IO DEVICE : F75111 UNDER WINDOWS .....................................................................................
1-2 IO DEVICE : F75111 VB6 UNDER WINDOWS .............................................................................
1-3 IO DEVICE : F75111 UNDER LINUX .............................................................................................
83
84
86
87
87
90
92
2

Copyright
This manual is copyrighted and all rights are reserved. It does not allow any non
authorization in copied, photocopied, translated or reproduced to any electronic or
machine readable form in whole or in part without prior written consent from the
manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special, incidental
or consequential damages arising from the use of inability to use the product or
documentation, even if advised of the possibility of such damages.
The manufacturer keeps the rights in the subject to change the contents of this
manual without prior notices in order to improve the function design, performance,
quality, and reliability. The author assumes no responsibility for any errors or omissions,
which may appear in this manual, nor does it make a commitment to update the
information contained herein.
Trademarks
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
All other trademarks, products and or product's name mentioned here are for
identification purposes only, and may be trademarks and/or registered trademarks
of their respective companies or owners.
© Copyright 2014
All Rights Reserved.
User Manual edition 0.1, Apr. 22. 2014

1
Warning !
1. Battery
Batteries on board are consumables.
The life time of them are not guaranteed.
2. Fless solution with HDD
The specification & limitation of HDD should be considered carefully when
the fanless solution is implemented.
3. We will not give further notification in case of changes of
product information and manual.
4. SATA interface does not support Hot SWAP function.
5. There might be a 20% inaccuracy of WDT at room temperature.
6. Please make sure the voltage specification meets the requirement
of equipment before plugging in.
8. Caution! Please notice that the heat dissipation problem could cause the MB
system unstable. Please deal with heat dissipation properly when
buying single MB set.
9. Please avoid approaching the heat sink area to prevent users from
being scalded with fanless products.
12. It is important to install a system fan toward the CPU to decrease
the possibility of overheating / system hanging up issues,
or customer is suggested to have a fine cooling system to dissipate heat
from CPU.
11. DO NOT apply any other material which may reduce cooling
performance onto the thermal pad.
10. If users repair, modify or destroy any component of product unauthorizedly,
We will not take responsibility or provide warranty anymore.
7. There are two types of SSD, commercial grade and industrial grade, which
provide different read/write speed performance, operation temperature and
life cycle. Please contact sales for further information before making orders.

2
Hardware Notice Guide
1. Before linking power supply with the motherboard, please attach DC-in adapter to
the motherboard first. Then plug the adapter power to AC outlet.
Always shut down the computer normally before you move the system unit or
remove the power supply from the motherboard. Please unplug the DC-in adapter first
and then unplug the adapter from the AC outlet.
Please refer photo 1 as standard procedures.
2. In case of using DIRECT DC-in (without adapter), please check the allowed range
for voltage & current of cables. And make sure you have the safety protection for
outer issues such as short/broken circuit, overvoltage, surge, lightning strike.
3. In case of using DC-out to an external device, please make sure its voltage and
current comply with the motherboard specification.
4. The total power consumption is determined by various conditions
(CPU/motherboard type, device, application, etc.). Be cautious to the power cable
you use for the system, one with UL standard will be highly recommended.
5. It’s highly possible to burn out the CPU if you change/ modify any parts of
the CPU cooler.
6. Please wear wrist strap and attach it to a metal part of the system unit
before handling a component. You can also touch an object which is
ground connected or attached with metal surface if you don't have wrist strap.
7. Please be careful to handle & don't touch the sharp-pointed components on
the bottom of PCBA.
8. Remove or change any components form the motherboard will VOID the warranty of
the motherboard.
9. Before you install/remove any components or even make any jumper setting
on the motherboard, please make sure to disconnect the power supply first.
(follow the aforementioned instruction guide)
10. "POWERON after PWR-Fair” function must be used carefully as below:
When the DC power adaptor runs out of power, unplug it from the DC current;
Once power returns, plug it back after 5 seconds.
If there is a power outage, unplug it from the AC current, once power returns,
plug it back after 30 seconds. Otherwise it will cause system locked or made
a severe damage.
Remark 1:
Always insert/unplug the DC-in horizontally & directly to/from the motherboard.
DO NOT twist, it is designed to fit snugly.
Moreover, erratic pull / push action might cause an unpredictable damage to the
component & system unit.
*

3
2
1
3
1
2
3
Photo 1 Insert
Unplug

4
Chapter-1
General Information
The 3I380D is built to be an all-in-one networking control board. It’s designed to combines
all necessary input and output interfaces, which make them to be ideal control board for
thin client, firewall or server applications. 3I380D is the perfect platforms for whole range
of small form factor, low-power devices.
High-performance and power-efficient networking platform, the embedded motherboard
3I380D is specially designed for advanced embedded VPN or firewall applications where
the economical use of power is in high demand. With the sizable memory bandwidth of on
board 2GB DDR3L or DDR3L SODIMM socket or the flexibility of expanding the memory
to 4GB DDR3L SODIMM socket, 3I380D ensures the high performance level required of
today's most popular firewall applications. 3I380D supports with four 10/100/1000 Mbps
Ethernet for seamless broadband connectivity. With Wake-On LAN function and the PXE
function in BIOS, these are perfect control board for networking devices. The built-in LAN
option includes four Intel I211AT LAN chipset for PCIe x 1 V2.1 interface with RJ45 for
10/100/1000 Mbps Ethernet. 3I380D also offers two COM ports (by wafer connection) to
meet the needs of COM port connectivity.
3I380D integrates PCIe mini card for mSATA & USB & SIM card interfaces. In addition,
with EHCI high-speed host controller interface; it ensures the high performance level and
also the powerful and flexible expansion. Moreover, a single flash chip holds the system
BIOS, and you can change the flash BIOS by the Utility Update.
The 3I380D all-in-one motherboard is fully compatible with industrial standards, plus
technical enhancements and thousands of software applications developed for IBM PC/
AT compatible computers. The control logic provides high-speed performance for the most
advanced multi user and multitasking applications available today.

5
1. Intel Bay Trail-I E3815 1.46GHz / Intel Bay Trail-D J1900 2.0/2.42(Burst)GHz SOC
2. Intel Bay Trail-I Integrated Graphics chipset:
Bay Trail-I E3815 Graphics speed: 400MHz
Bay Trail-D J1900 Graphics speed: 688MHz/854MHz(Turbo)
3. 1 x DDR3L SO-DIMM socket or On board DDR3L SDRAM (max. 4GB)
4. On board SSD 4/8/16/32 GB (option)
5. Support 4 x 10/100/1000 Mbps LAN on Board
(Intel I211AT LAN chipset for PCIe x 1 V2.1 interface)
6. Support 1 pair LAN Bypass function when DC Power off (option)
7. Support 1 x SATA, 7 x USB
8. Support PCIe mini cards including one for USB & SIM card interfaces,
another one for USB & mSATA interface
9. On board DC +12V Power Supply (Note: -5V, -12V no support)
10. Compact PCB Dimension: 145 x 102 mm (3.5 inch)
11. One 3G SIM card reader (for 3G mini card use)
1-1 Major Feature

6
1. SOC : Intel Bay Trail-I E3815 1.46GHz (Single core) /
Intel Bay Trail-D J1900 2.0/2.42(Burst)GHz (Quad core)
2. Memory : 1 x DDR3L SO-DIMM socket or On board DDR3L SDRAM (max. 4GB)
3. VGA : Intel Bay Trail-I Integrated Graphics chipset:
Bay Trail-I E3815 Graphics speed: 400MHz
Bay Trail-D J1900 Graphics speed: 688MHz/854MHz(Turbo)
4. I/O Chip : F81801U I/O chipset
5. SATA : One SATA port with independent DMA operation supported
6. NAND flash memory: On board SSD 4/8/16/32 GB (option)
7. LAN : 4 x Intel I211AT LAN chipset or Intel I210AT LAN chipset (option)
with 10/100/1000 Mbps for PCIe x 1 V2.1 interface
8. Serial Port : 2 x COM
9. USB : 6 x USB 2.0 (3 external + 3 internal) & 1 x USB 2.0/3.0 (internal)
10. Sound (option) : ALC886 HD Audio Specification 1.0 Two channel sound
11. LAN Bypass (option) : support 100Mb LAN Bypass function when DC Power off
12. DIO (option) : Fintek F75111N chipset for 4DI/4DO
13. WDT (option): F81801U IO chipset for hardware watch dog timer support,
0~255 sec programmable
14. Expansion interface : 2 x PCIe mini card including one PCIe Mini card for
USB & SIM card interfaces, one PCIe Mini card for USB & mSATA interface
15. BIOS : Insyde UEFI BIOS
16. Dimension : 145 x 102 mm (3.5 inch)
17. Power : On board DC +12V (Note: -5V, -12V no support)
18. 3G Wireless : one 3G SIM card reader (for 3G mini card use)
1-2 Specification

7
1-3 Installing the SO-DIMM (for 3I380D-D90)
1. Align the SO-DIMM with the connector at a 45 degree angle.
2. Press the SO-DIMM into the connector until you hear a click.

8
Notices:
1.The connectors are designed to ensure the correct insertion. If you feel resistance,
check t h e connectors & golden finger direction, and realign the card.
2. Make sure the retaining clips (on two sides of the slot) lock onto the notches of
the card firmly.

9
1-3-1.1 Removing the SO-DIMM (for 3I380D-D90)
1. Release the SO-DIMM by pulling outward the two retaining clips and
the SO-DIMM pops up slightly.
2. Lift the SO-DIMM out of its connector carefully.

10
1. Unscrew the screw on the board
3. Gently push down the Mini Card and screw the screw back.
2. Plug in the Mini Card in a 45 angle
1-4 Directions for installing the Mini Card

11
1-5 Packing List ( For 3I380D-D90)
Material Code Description Detail Specification Quantit
17G1901-1481001-0 MB-3I380D-D90-00-001 LF,3I380D-D90-00,Rev.:001 1
26G8006-2347-0100 LEX Product Driver DVD LF, Intel Baytrail Driver 1
36G5212-0601-0200 60W Power Adapter,12V/5A,2.5 LF,L Type,FSP060-DBAE1,FSP 1
46G8001-2191-0400 Manual LF,M/B,3I380D 1
56G6003-7330-0100 Power Cable LF,L=9cm,2.0 1*4/DC JK 1
*The packing list above is for the users who purchase single motherboard. The users
who purchase the board with chassis may refer to the packing list in the Assembly Guide.
Please contact with your dealer if any of these items is missing or damaged
on delivery. And please keep all parts of the delivery package with packing
materials in case if you need to deliver or store the product in the future.

12
Material Code Description Detail Specification Quantit
17G1901-1480001-0 MB-3I380D-I12-00-001 LF,3I380D-I12-00,Rev.:001 1
26G8006-2347-0100 LEX Product Driver DVD LF, Intel Baytrail Driver 1
36G5212-0601-0200 60W Power Adapter,12V/5A,2.5 LF,L Type,FSP060-DBAE1,FSP 1
46G8001-2191-0400 Manual LF,M/B,3I380D 1
56G6003-7330-0100 Power Cable LF,L=9cm,2.0 1*4/DC JK 1
*The packing list above is for the users who purchase single motherboard. The users
who purchase the board with chassis may refer to the packing list in the Assembly Guide.
Please contact with your dealer if any of these items is missing or damaged
on delivery. And please keep all parts of the delivery package with packing
materials in case if you need to deliver or store the product in the future.
1-5-1 Packing List ( For 3I380D-I12)

13
Chapter-2
This chapter provides the information how to install the hardware of 3I380D
Please follow section 1-5,1-5-1, 2-1 and 2-2 to check the delivery package and unpack
carefully. Please follow the jumper setting procedure.
You should follow these
steps to protect the board from the static electric
discharge whenever you handle the board:
1. Ground yourself by a grounded wrist strap at all times when you
handle the 3I380D.
Well secure the ALLIGATOR clip of the strap to the end of the shielded wire lead from
a grounded object. Please put on and connect the strap before handling the
3I380D for harmlessly discharge any static electricity
through the strap.
2. Please use anti-static pad to put any components, parts, or tools on the pad whenever
you work on them outside the computer. You may also use the anti-static bag instead of
the pad. Please ask your local supplier for necessary parts on anti-static requirement.
3. Do not plug any connector or set any jumper when the power is on.
Hardware Installation
2-1 Unpacking Precaution
NOTE!
1. Do not touch the board or any other sensitive components without all necessary
anti-static protection.
2. Please pay attention to the voltage limitation of DC-IN12 V 5 %.
Overuse of DC-IN voltage limitation or change to another power adapter
( not provided with this system ) will VOID warranty.

14
First of all, please follow all necessary steps of section 2-1 to protect 3I380D
from electricity discharge. With reference to section 1-5,1-5-1
please check the delivery package again with following steps:
1. Unpack the 3I380D board and keep all
packing material, manual and driver disc etc, do not dispose !
2. Is there any components lose or drops from the board?
DO NOT CONTINUE TO INSTALL THIS BOARD!
CONTACT THE DEALER YOU PURCHASED
THIS BOARD FROM, IMMEDIATELY.
3. Is there any visible damage on the board?
DO NOT CONTINUE TO INSTALL THIS BOARD!CONTACT
THE DEALER YOU PURCHASED THIS BOARD FROM, IMMEDIATELY.
4. Check your optional parts (i.e. DDR, CF etc.), all necessary jumpers
setting to jumper pin-set, and CMOS setup correctly.
Please also refer to all information of jumper settings in this manual.
5. Check your external devices (i.e. Add-On-Card, Driver Type etc.)
for complete add-in or connection and CMOS setup correctly.
Please also refer to all information of connector connection in this manual.
6. Please keep all necessary manual and driver disc in a good condition for future
re-installation if you change your Operating System.
2-2 Unpacking checkup

15
2-3 Dimension-3I380D
SIM CARD
6.5
117
0
0
2.99
35.43
83.82
137.18
146
0
3.07
36.38
66.6
98.32
102 100.89
102
0
2.99
111.79
130.85
137.18
146
Ŗ3.4
Ŗ6
03
89.71
142
03
04
04
04
04
04
04
03
97.49
03
03
03
03
04 94.81
8.1
04
03
94.39
26.66
27.81
73.67
92.73
05
05
05
03
03 05
05