Lexar JumpDrive Fingerprint F35 User manual

JumpDrive®Fingerprint F35
Flash Drive
User Manual for Windows

Contents
Before You Start ................................................................................. 1
For Users............................................................................................................... 1
Specifications and Compatibility......................................................................... 1
Fingerprint Management Application ................................................ 1
Registration for Administrators............................................................2
To Set Password for Administrator...................................................................... 2
To Enroll Fingerprint for Administrator............................................................... 3
How to use F35 Fingerprint Flash Drive ..............................................3
Partitioning the Flash Drive .................................................................3
Managing Administrator and Users’ Accounts ................................... 4
Managing Password ........................................................................... 7
FAQ .................................................................................................. 10

1
BeforeYou Start
For Users
Dear User, thank you for purchasing the Lexar JumpDrive Fingerprint F35. The F35 is an
integration of biometric identification technology and data storage. Designed for those
demanding the highest level of data protection, the drive can safeguard sensitive data against
unauthorized access attempts using fingerprint authentication. Data stored in the securepartition
is safely protected and can only be accessed when the scanned fingerprint is authenticated.
Featuring convenience and top-class security, it not only spares you the trouble of memorizing
long passwords, but also brings you peace of mind.
Specifications and Compatibility
Interface: USB3.0
Fingerprint: The F35 can save up to 10 fingerprints.
Compatible Systems for Fingerprint Management Application: Windows XP+SP3, Vista,
Windows 7, Windows 8, Windows 8.1, Windows 10(32&64bit).
Compatible Systems for Memory Function: Windows XP+SP3, Vista, Windows 7, Windows
8, Windows 8.1, Windows 10(32&64bit), Linux, Mac.
Fingerprint Management Application
When using the F35 for the first time, please run the built-in application on your F35 with

2
your computer. This application is designed to set passwords and enroll fingerprints, manage
users whose accounts are registered, and change the size of the public and secure partition.
To run the fingerprint management application on your computer:
a. Attach your F35 to any available USB port on your computer. The drive should
be recognized automatically.
b. Click on “CD Drive(): Lexar” in the window of “My computer”
c. Double click the app icon “FingerTool_Lexar(Windows)” to run the application.
Note: Some Anti-Virus programs may block the FingerTool application, please set your Anti-Virus to
allow the operation of the application.
Registration for Administrators
Before the administrator can create additional accounts and enroll fingerprints for general
users, they must first register their account
This chapter explains how to register a password and fingerprint for the administrator.
To Set Password for Administrator
1. Click “Register”
to register account
2. Create your
Administrator
password
3. And then
click “NEXT”

3
To Enroll Fingerprint for Administrator
Note: We suggest you slightly change the angle of your finger for every attempt, allowing the system to
store prints of your pad, both sides, and tip of your finger. Repeat until the scan of your fingerprint is
completed.
How to use F35 Fingerprint Flash Drive
a. Attach the F35 to any available USB port on your computer and the drive should be
recognized automatically.
b. Place your finger (the one that had been enrolled) on the fingerprint sensor with light
and even pressure. You will see the light flash. When the fingerprint is authenticated, you will
see the secure partition and can access the data stored in this partition as shown below.
Partitioning the Flash Drive
a. Run the application “FingerTool_Lexar(Windows)”, and apply the Administrator’s
fingerprint to access the program. Click on the right tab marked “Partition.”
b. Click “NEXT”.
1. Enter your
administrator
name in the
name field.
3. Enroll your
fingerprint
2. You can select
back to restart the
process

4
c. Move the slider left and right to adjust the capacity between the public and the
secure partition. Click “Confirm” to begin the process. Please remove and re-insert the flash
drive after the drive has been re-partitioned.
Managing Administrator and Users’ Accounts
This chapter explains how to add, change, delete, and edit accounts.
1.1 Add Accounts.
a. Click “+” to start adding accounts.

5
b. Choose the account type (Administrator/Other Users) and then name the account.
Click “NEXT”
c. Place your finger on the sensor to register your fingerprint for this new account.

6
1.2 Edit accounts.
a. Choose the account you want to edit and click the fingerprint icon on the right.
b. Edit the account type & name and click Confirm. If you want to change the
fingerprint, click “Change Fingerprint”
c. Place your finger on the sensor to change fingerprint.

7
1.3 Delete accounts.
a. Choose the account you want to delete and click the trash icon in the right.
b. Click “Confirm” if you are sure you want to delete the account.
Note: The application will not allow you to have zero administrator accounts. You must have at least
one administrator account.
Managing Password
a. Click “Password Verification” on the initial screen when asked for your Fingerprint
Verification.

8
b. Click “Forget Password?” on the password authentication screen.
Enter a new password. Before entering, a pop-up window will show Lexar’s suggestion
for a new password.