Lexicon DC-1 User manual

DC-1 Dolby Digital®/DTS®Quick Reference
Input Connections
VCR1 _____________
VCR2 _____________
V-DISC ____________
TV _____________
AUX _____________
CD _____________
TUNER _____________
TAPE _____________
Finding your way through the DC-1 Menus
Continue highlighting and
SELECTing to reach the
parameter you want to
change.
Press DONE to return to
thepreviousmenu.Toexit,
press EFFECT, any Input
Selector, BYPASS or
RECORD/ZONE2.
Adjust parameter with
MENU ▲or ▼. Your
changes are saved auto-
matically.
On the remote control,
press MENU SELECT, ▲
or ▼to enter the Main
menu.
UseMENU▲or▼tohigh-
light an item. Press SE-
LECT to open a submenu.
Lexicon, Inc. 3 Oak Park • Bedford MA 01730-1441 USA • Tel: [phone] • Fax: [phone]
* Available only in the DTS version

Digital inputs can be se-
lectedfortheRecord/Zone
2 outpus under the follow-
ing conditions:
• A digitial input must be as-
signed to the input via the
Setup menu.
• The input must have
Record/Zone 2 set to DIGI-
TAL.*
• The input must be selected
for Main outputs.
RECORD/ZONE 2 Control
mode allows use of the
DC-1inanotherroomwhile
theroominwhich theDC-1
is located remains muted.
To enter RECORD/ZONE
2Controlmode,turnonthe
DC-1 by pressing the
RECORD/ZONE 2 key on
the remote.
Pressinganykeyotherthan
the input selectors, MUTE,
VOLUME or BALANCE will
display the message:
ZONE 2 MODE ENABLED
KEY INVALID
To exit, press OFF.
Innormaloperation,press-
ing RECORD/ZONE 2 as-
signs (or de-assigns) the
current input selection to
theRecord/Zone2outputs
without affecting the Main
outputs.
To access remote control
Zone2functions,pressand
hold ACCY, then press
RECORD/ZONE 2. To re-
store remote control of the
main outputs, press and
hold ACCY, then press
SELECT.
Holding down RECORD/
ZONE2allowsVolumeand
Mute adjustments to affect
onlytheRecord/Zone2out-
puts.
• Disables mute
• SetsMainandZone2 volume
to -30dB
• Centers Balance controls
• Loads the Pro Logic Effect
Press and hold ACCY while pressing DONE to activate a
"You Are Here" mode which:
RECORD/ZONE 2 Control from the normal operating mode
Exclusive RECORD/ZONE 2 Control Mode Remote Control ACCY Functions
* TAPE and VCR1 are normally
"BLOCKED" but can bechanged in the
Setup Input Configuration menu.
• Selects the VCR1 input
• Activates On-Screen display
with 2 second timeout
• Sets Remote Trigger ON
• Setsalltonecontrolsto0dBor
OFF
VCR1 _____________
VCR2 _____________
V-DISC ____________
TV _____________
AUX _____________
CD _____________
TUNER _____________
TAPE _____________
Note any Effects you have
assignedtotheremotecon-
trol input keys.
Input Effect Assignments
*To clear an assigned effect, while holding down ACCY, pressBYPASS, then
press the associated input button.
Lexicon, Inc. 3 Oak Park • Bedford MA 01730-1441 USA • Tel: [phone] • Fax: [phone]
DC-1 Dolby Digital®/DTS®Quick Reference