Lexicon LE45 User manual

QUICK START GUIDE
LEXICON LE45
MOBILE COMPUTER

LE45 QUICK START GUIDE 2
TABLE OF CONTENTS
LE45 QUICK START GUIDE
FEATURES
3. FRONT AND SIDE VIEWS
4. REAR, TOP, & BOTTOM VIEWS
GETTING STARTED
5. CRADLING & CHARGING
6. INSTALLING THE HANDSTRAP
7. ENABLING/DISABLING WIFI & BLUETOOTH
8. REBOOT & FACTORY RESET DATA
9. ENABLING SCANNER
10. SIDELOADING APK VIA USB-C CONNECTED TO PC
14. BATTERY WARNING & SAFETY
REGULATION & MAINTENANCE
15. FCC & CANADIAN COMPLIANCE

LE45 QUICK START GUIDE 3
FEATURES
Front and Side Views
1. Power Button
2. LCD Display
3. Right Scan Trigger Button
4. Left Scan Trigger Button
5. USB-C Connector
6. Keypad
7. Battery
8. Notification LEDs
4
8
2
6
1
5
3
7

LE45 QUICK START GUIDE 4
FEATURES
Rear, Top and Bottom Views
4
Top
Bottom
1. Data Capture Window
2. Bottom Pogo Pin
3. Speaker
4. Handstrap Clip
5. Battery Pack
6. Handstrap Bar
1
2
3
5
6

LE45 QUICK START GUIDE 5
GETTING STARTED
Cradling and Charging
CHARGING THE DEVICE BY POWER ADAPTER
1. Insert the small end of power adapter into the
USB-C jack.
2. Plug the large end of power adapter into a power
outlet .
CRADLING THE DEVICE
1. Slide the device into the cradle at a slight angle.
2. Slightly push the device back.
3. Check the device is sitting in the cradle securely.
CHARGING THE DEVICE
1. Connect the power supply to the cradle. Make
sure the cradle green LED is ON.
2. Place the device on the cradle.
CHARGING STATUS LED ON DEVICE
•Green LED = charged over 90%
•Flashing Green LED = charging battery percentage
within 80% and 90%
•Red LED = charging battery percentage within
0% and 80%
*Important notes
8 hours is recommended for the 1st time charging.
Recharge of 6000mAh will take 4-5 hours for 80% battery capacity.

LE45 QUICK START GUIDE 6
GETTING STARTED
Installing the Handstrap
1. Remove screws from the handstrap holder.
2. Separate the velcro of the handstrap.
3. Feed the loose end of the extended handstrap through the handstrap clip.
4. Wrap the handstrap around the clip and fasten together to close the strap.
5. Install the screws back to handstrap holder.

LE45 QUICK START GUIDE 7
GETTING STARTED
Enabling and Disabling WIFI and Bluetooth
ENABLING WIFI
1. Swipe up from the bottom of the screen to the top to
show all the applications. Select
Settings
.
2. Go to
Network & Internet
, turn on WiFi.
3. Tap the WiFi text on the setting screen.
4. Select the desired network from the list. Set
appropriate properties.
DISABLING WIFI
1. Swipe up from the bottom of the screen to the top to
show all the applications. Select
Settings
.
2. Go to
Network & Internet
, turn on WiFi.
ENABLING / DISABLING BLUETOOTH
1. Swipe up from the bottom of the screen to the top to
show all the applications. Select
Settings
.
2. Select
Connected Devices
and then select
Connection Preferences
.
3. Tap on
Bluetooth
and toggle Bluetooth on/off.
4. When Bluetooth is ON, tap
Pair New Device
. A list of
Bluetooth devices appears, select the desired device
to pair.

LE45 QUICK START GUIDE 8
GETTING STARTED
Reboot and Factory Data Reset
PERFORMING FACTORY DATA RESET
1. Swipe up from the bottom of the screen to the top to show all the
applications. Select
Settings
.
2. In System section, tap
Advanced
, select
Reset Options
and then
select
Erase All Data (factory reset).
3. Click
Reset Phone
.
PERFORMING REBOOT
1. Press and hold power button.
2. Select
Restart
to reboot the device.

LE45 QUICK START GUIDE 9
GETTING STARTED
Enabling Scanner
1. Remove the scanner film from the scanner window.
2. Tap Apps icon, then select
ScanDemo.
3. Press the scanner button on the device to scan the barcode.
4. Barcode data will be shown on the screen.
Scanner
Button
Scanner
Button

LE45 QUICK START GUIDE 10
GETTING STARTED
Sideloading APK via USB-C Connect to PC
1. Power on the LE45.
2. Connect the smaller end of the
USB-C cable to the LE45, connect
the other end to the USB port on
the PC.
3. Swipe down from the top of the
LE45 to ensure the USB file transfer
is turned on
USB-Connector

LE45 QUICK START GUIDE 11
GETTING STARTED
Sideloading APK via USB-C Connect to PC
1. Utilize the File Explorer on the
PC, navigate to the LE45. Click
on the LE45, explore the
Internal shared storage
2. Copy and paste the APK on the
PC into the Download folder on
the LE45.

LE45 QUICK START GUIDE 12
GETTING STARTED
Sideloading APK via USB-C Connect to PC
4. On the LE45, swipe up to go to the Apps tray.
5. Touch the File Manager/Internal shared storage/Download.
6. Touch the APK to execute the APK installation.

LE45 QUICK START GUIDE 13
GETTING STARTED
Sideloading APK via USB-C Connect to PC
7. Confirm to install the application (.APK) when prompted.

LE45 QUICK START GUIDE 14
GETTING STARTED
Battery Warning / Battery Safety Guidelines
1. Use manufacturer's original battery and charger only. Any incompatible battery or charger
may result in a fire, explosion, or other hazard.
2. Do not disassemble or open, crush, bend or deform, puncture, or shred the battery.
3. Do not short-circuit a battery by allowing conductive materials to contact the battery terminals.
4. Do not immerse or expose the battery to water or other liquids.
5. Do not dispose of batteries in fire or place the battery into a microwave oven or dryer.
6. If battery leakage is found, avoid allowing the liquid to come in contact with the skin or eyes.
7. If contact has been made, rinse the affected area with water and seek medical advice.
8. If you suspect damage to your equipment or battery, contact the manufacturer for inspection.
9. Follow the local regulations to dispose or recycle the used re-chargeable batteries.

LE45 QUICK START GUIDE 15
REGULATIONS & MAINTENANCE
FCC and Canadian Compliance
Tested to Comply with FCC Standards.
LE45 mobile computers meet or exceed all applicable standards and have been manufactured
to the highest level of quality.
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) INFORMATION
This product has required the extraction and use of natural resources for its production. It may
contain hazardous substances that could impact health and the environment, if not properly
disposed.
In order to avoid the dissemination of those substances in our environment and to diminish
the pressure on the natural resources, we encourage you to use the appropriate take-back
systems for product disposal. Those systems will reuse or recycle most of the materials of the
product you are disposing in a sound way.
The crossed out wheeled bin symbol informs you that the product should not be disposed of
along with municipal waste and invites you to use the appropriate separate take-back systems
for product disposal.
If you need more information on the collection, reuse and recycling of these systems, please
contact your local region’s waste administration. You may also contact your supplier for more
information on the environmental performances of this product.

LE45 QUICK START GUIDE 16
MITCH ROGERS
T | 678.750.0306 M | 404.375.1902 E|mrogers@lexicontech.com
CONTACT
Other manuals for LE45
2
Table of contents
Other Lexicon PDA manuals