Lexmark X746 User manual

Supplies guide
The following table lists the part numbers for ordering supply items.
Ordering a toner cartridge
When a message appears on the printer display indicating which toner cartridge needs to be replaced, immediately order a new
toner cartridge.
For information on replacing a toner cartridge, see the instruction sheet that came with the supply.
Estimated cartridge yield is based on the ISO / IEC 19798 standard (with about 5% coverage per color). Extremely low print
coverage (less than 1.25% for a color) for extended periods of time may negatively affect actual yield for that color and may
cause cartridge parts to fail prior to exhaustion of toner.
Recommended toner cartridges and part numbers
Part name Lexmark Return Program Cartridge Regular cartridge
Black High Yield Toner Cartridge X746H1KG X746H2KG
Yellow Toner Cartridge
Yellow High Yield Toner Cartridge
X746A1YG
X748H1YG
X746A2YG
X748H2YG
Magenta Toner Cartridge
Magenta High Yield Toner Cartridge
X746A1MG
X748H1MG
X746A2MG
X748H2MG
Cyan Toner Cartridge
Cyan High Yield Toner Cartridge
X746A1CG
X748H1CG
X746A2CG
X748H2CG
Ordering a fuser or a transfer module
A message on the printer display appears when the fuser or transfer module needs to be replaced.
For information on replacing the fuser or transfer module, see the instruction sheet that came with the supply.
Recommended part numbers
Part name Part number
Fuser 40X8112 (100 V)
40X8110 (115 V)
40X8111 (230 V)
Transfer module 40X8307
Ordering a waste toner bottle
A message on the printer display appears when the waste toner bottle needs to be replaced.
For information on replacing the waste toner bottle, see the instruction sheet that came with the supply.
Note: Waste toner bottle reuse is not recommended.
Supplies guide
Page 1 of 2

Recommended part number
Part name Part number
Waste toner bottle C734X77G
Ordering ADF replacement parts
Order ADF replacement parts if you experience problems with paper double-feeding or failing to feed through the ADF.
For information on replacing the ADF parts, see the instruction sheets that came with the parts.
Recommended part numbers
Part name Part number
ADF pick assembly 40X5188
Separator pad 40X5187
ADF pick pad 40X5189
Ordering a photoconductor
A message will appear on the printer display when a photoconductor needs to be replaced.
For information on replacing a photoconductor, see the instruction sheet that came with the supply.
Recommended part numbers
Part name Part number
Photoconductor C734X20G
Photoconductor, Multi‑Pack C734X24G
Notes:
•All four photoconductors should be replaced at the same time.
•Reset the maintenance counter back to zero after installing the four new photoconductors.
Supplies guide
Page 2 of 2