Lexmark X748dte User manual

Power Saver –Reduces the power state of the printer after printing –adjustable from
1-240 minutes
Scheduled Warm-up using MarkVision –Conserves energy by scheduling power
saver to engage during specified days and times during the week
Instant Warm-Up fuser –Saves energy
Eco-Mode –Conserves energy and paper through three optional settings:
Energy Saving Mode: Operator panel backlight and advance paper start are
disabled, the fuser is not continually heated, and the scanner lamps are only
activated when a scan job is started
Paper Saving Mode: Device defaults to duplex printing and the print log features
are turned off
Energy + Paper Saving Mode: Energy and paper saving settings are activated
Quiet Mode –Reduces noise emission by adjusting print speed, disabling advanced
paper start, disabling or minimizing beeps (key press, alarms, etc.), and adjusting fan
speed (Quiet mode may be combined with Eco-Mode)
Multi-Page Printing –Prints multiple page images on one page
Duplex –Prints on both sides of a page
Recycled Paper –Supports the use of recycled content media
Print and Hold –Holds print jobs until released by the user at the printer interface by
entering a pin number (Hard drive option needed)
Badge Reader Authentication –Holds print jobs until released by the user at the
printer interface by swiping an identification badge (Hard drive option and integration
services required through SPR)
Fax Redirect –Conserves paper by digitalizing faxes and redirecting to email or file
rather than printing (Hard drive option required)
Distribute Information Electronically –Conserves paper by routing scanned
documents to e-mail, network folders, USB thumb drives, FTP, and LDSS
destinations (Additional options may be required)
Toner Darkness Control –Adjusts the print darkness to conserve toner
Color Saver –Conserves toner by printing images and graphics lighter
High Yield Toner Cartridges –More toner per cartridge reduces the energy and
materials used per printed page
Lexmark X748de, X748dte
Color Multifunction Laser Printers
Design for Environment
This Lexmark product offers the following resource conserving
features:
Conscientious Material
Selection
Energy Saving
Paper Saving
Toner Saving
Waste Minimizing
(Non paper waste)

Chemical Emissions
Printer emissions testing is performed in accordance with the “Test method
for the determination of emissions from hardcopy devices with respect to
awarding the environmental label for office devices with printing function
according to RAL-UZ 122, “ BAM April 2006.
Emitted
Substance
Product Measurement
(Monochrome)
Maximum according
to Guideline (Mono)
Ozone (mg/h)
<0.06
1.5
Styrene (mg/h)
0.14
1.0
Benzene (mg/h)
<0.03
<0.05
Dust (mg/h)
<0.7
4.0
TVOC (mg/h)
0.74
10
Emitted
Substance
Product Measurement
(Color)
Maximum according
to Guideline (Color)
Ozone (mg/h)
<0.06
3
Styrene (mg/h)
0.4
1.8
Benzene (mg/h)
<0.03
<0.05
Dust (mg/h)
<0.7
4.0
TVOC (mg/h)
6.8
18
*Note: The print test is performed using genuine Lexmark supplies. Emissions may
vary if using non-Lexmark supplies.
Product Restricted Materials
The reduction of materials harmful to persons or the environment is a
significant part of Lexmark's commitment to continuously improving the
environmental design of all our products and services. Lexmark has
developed a multi-layered due diligence process to ensure that all
materials going into Lexmark products are safe and compliant with global
regulations regarding hazardous substances.
This product is compliant with the requirements of the European Union's
Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment (RoHS).
This product is compliant with the requirements of the European Union’s
Registration, Evaluation, Authorization and Restriction of Chemicals
(REACH) regulation.
This product and its packaging are labeled as required by China’s
“Management Methods for Controlling Pollution by Electronic Information
Products.”
The product does not contain:
Cadmium
Hexavalent chromium
Polybrominated biphenyls
Polybrominated diphenyl ethers
Mercury
Asbestos
Short chain chlorinated paraffins
Polychlorinated phenols
Polychlorinated terphenyls
Ozone depleting chemicals (Chlorofluorocarbons (CFCs), halons, HCFCs,
HBFCs, 1,1,1-trichlorethane, carbon tetrachloride, methyl bromide)
Halogenated flame retardants in cover sets
Voluntary Environmental Certifications
This product conforms to the following voluntary
environmental program criteria:
US EPA ENERGY STAR V 1.2
BLUE ANGEL (RAL-UZ 122) (Valid until December 2012)
Recyclable Design
Mechanical plastic parts over 100g consist of one or more easily
separable materials.
Use of non-separable connections between different materials, such
as gluing or welding, has been avoided.
Product Description:
Measurements provided are for a non-
packaged product.
X748de
Weight 40.40 kg | 89.07 lbs (without cartridge)
Width 546 mm | 21.50 in
Depth 622 mm | 24.49 in
Height 787 mm | 30.98 in
X748dte
Weight 44.7 kg | 98.55 lbs (without cartridge)
Width 546 mm | 21.50 in
Depth 622 mm | 24.49 in
Height 909 mm | 35.79 in
Due to printer weight this printer requires at least three
people to lift it safely. For additional information consult
the setup guide.
Operational Data
Speed (Letter –ppm) Up to: 35 Speed (A4 - ppm) Up to: 33
Power
Printing Duplex
435 W
Printing Simplex
560 W
Ready
55 W
Sleep
11 W
Hibernate
0.5 W
Off
0 W
Typical Electricity Consumption Test
(TEC)
4.525 kwh/week
Typical Electricity Consumption Test
Eco-Mode (TEC)
3.061 kwh/week
Acoustic
Noise
Printing Simplex (mono / color)
56 dBA / 57 dBA
Printing Duplex (mono / color)
56 dBA / 57 dBA
Printing* Quiet Mode (mono / color)
49 dBA / 49 dBA
Idle
34 dBA
*Note: These measurements are subject to change
* Note: Simplex

This product contains the following in limited quantities as allowed
by regulations:
Lead (use is limited to small amounts for specific applications)
Battery Usage
This product is compliant with the 2006/66/EC Battery Directive.
The battery contained within this product does not contain cadmium,
mercury, or lead.
Battery Type: Lithium Manganese Dioxide coin cell
Weight: ~ 0.23 g
Customer removable: No
Packaging
Packaging Materials
Wood 6.505 kg
Corrugated 5.260 kg
Polyethylene Foam 2.411 kg
Paperboard 0.295 kg
High Density Polyethylene (HDPE) 0.233 kg
Polypropylene 0.065 kg
Please check the availability of municipal recycling programs in
your area that will accept these packaging materials.
Plastic packaging materials are marked according to DIN 6120, ISO
11469 or ISO 1043.
Plastic packaging is free from halogen and ozone depleting
materials.
In order to comply with the local packaging take-back requirements
in Europe, Lexmark is a member of a packaging recovery scheme.
The “Green Dot” symbol is printed on Lexmark packaging when
applicable.
End-of-Life Management/Recycling
Lexmark offers customers an environmentally responsible choice for
disposal of end-of-life printers- the Lexmark Equipment Collection
Program. Through this program, customers may return any end-of-life
Lexmark branded products, and Lexmark will recycle the equipment for
free.
Lexmark also offers customers an environmentally responsible choice
for disposal of used toner cartridges- the Lexmark Cartridge Collection
Program. The Lexmark Cartridge Collection Program diverts millions of
Lexmark cartridges from landfills annually by making it both easy and
free for Lexmark customers to return used print cartridges to Lexmark for
reuse or recycling. One hundred percent of the empty cartridges
returned to Lexmark are either reused or demanufactured for recycling.
Boxes used to return the cartridges are also recycled.
Visit www.lexmark.com/recycle for information specific to the recycling
program offered in your geography.
Lexmark fully complies with the European Union’s Waste Electrical and
Electronic Equipment (WEEE) Directive.
Product Safety
Material Safety Data Sheets are available for Lexmark Printer supplies
at: http://www.lexmark.com
Additional safety information about this product is in the User’s
Reference and at: http://www.lexmark.com
Longevity and upgrading
Standard
Standard Warranty 1 year
Extended Warranty Optional
Spare parts and service is available for a minimum of 5 years.
Information about upgrades is available online at
http://www.lexmark.com
Company Information
Lexmark International, Inc. (NYSE:
LXK) makes it easier for businesses to
move information between the digital
and paper worlds. Since our inception
in 1991 as a spin-off of IBM, Lexmark
has become a leading developer,
manufacturer and supplier of printing
and imaging solutions for offices and
homes. Lexmark’s products include
laser printers, inkjet printers,
multifunction devices and associated
supplies, services and solutions.
Lexmark Corporate Social
Responsibility (CSR) activities are
fundamentally guided by the Lexmark
vision and values –the cornerstone of
the corporate character we have built
at Lexmark. Lexmark is committed to
acting as a socially responsible
company in our global community. This
means that we will fully comply with the
laws, rules and regulations of the
countries in which we operate. It also
means that we will go further by
continually evaluating our business
practices using the principle of
sustainability.

PRODUCT ENVIRONMENTAL FEATURES
Lexmark X748de, X748dte Color Multifunction Laser Printers
Compatible with
Recycled Paper
Multifunction
Device
Print
Anywhere
Scan to
Destination
Multi-
Page
Printing
Capability
Toner
Darkness
Control
Eco-Mode
Power Saver
Mode
Quiet Mode
Recyclable
Design
Return Program Print Cartridges
High Yield Cartridges
Free and Easy Cartridge Recycling
with the Lexmark Cartridge
Collection Program
Duplex
Capability