10
ENG
ENGLISH
PRODUCT INSTALLATION
Precaution
Do not lift up the product by holding a corner.Do not hold the screen area when holding the
product.
Use a soft cloth moistened with n-hexane to
remove dust or stains on the screen.
Correct Method Incorrect Method
yMake sure the power is disconnected before
moving or installing the product. Otherwise
electric shock may occur.
yWear working gloves when installing the
product. Do not use bare hands. Otherwise,
it may cause personal injury.
yIf you install the product on a ceiling or
slanted wall, it may fall and result in severe
injury.
yDo not fasten the screws too tightly; this may
cause damage to the product and void your
warranty.
yUse M3 x 4 mm screws to mount the
monitor. Any damages or injuries caused by
misuse or use of improper accessories are
not covered by the warranty.
yIf a fixed image displays on the screen for a
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
yTo prevent image sticking, do not play a still
image for more than two hours.
yRecommended operation time for optimum
performance and reliability is 12 hours or
less per day.
CAUTION
CAUTION
