LG 47WS50MS User manual

www.lg.com
OWNER’S MANUAL
MONITOR SIGNAGE
42WS50BS
47WS50BS
55WS50BS
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
42WS50MS
47WS50MS
55WS50MS

2
ENG
ENGLISH
TABLE OF CONTENTS
CONTENTS
4LICENSES
5ASSEMBLING AND
PREPARING
5 Accessories
6 Optional Accessories
7 Parts and buttons
8 Using the Mounting Cable Tie
8 Connecting the Speakers
9 Connecting the stand
9 Using the IR Receiver
10 Using the Kensington security system
10 Portrait Layout
11 Connecting the Media Player
12 Mounting on a wall
14 REMOTE CONTROL
16 USING THE MONITOR
16 Connecting to a PC
17 - RGB connection
17 - DVI-D connection
18 - HDMI connection
18 - Display Port connection
19 - IR Receiver connection
20 Adjusting the screen
20 - Selecting an image mode
20 - Customizing image options
21 - Customizing PC display options
21 Adjusting the sound
21 - Selecting an sound mode
22 - Customizing sound options
22 Using additional options
22 - Adjusting aspect ratio
24 - Using the input list
25 ENTERTAINMENT
25 - Connecting to a wired network
26 - Network Status
27 - Connecting USB storage devices
28 - Browsing files
29 - Viewing movies
33 - Viewing photos
36 - Listening to music
38 - Viewing the Contents List
39 - DivX® VOD Guide
40 - Using PIP/PBP
42 CUSTOMIZING SETTINGS
42 Accessing Main Menus
43 - PICTURE settings
46 - AUDIO settings
47 - TIME settings
48 - OPTION settings
53 - Picture ID
54 - NETWORK settings
55 MAKING CONNECTIONS
56 Connecting to a HD receiver, DVD,
Camcorder, Camera, Gaming Device or
VCR player
56 - HDMI connection
56 - Component connection
57 - AV(CVBS) connection
57 Connecting to a USB
58 Connecting to the LAN
58 - LAN connection
59 Daisy Chain Monitors

3
ENG
ENGLISH
TABLE OF CONTENTS
60 - DVI Cable
60 TROUBLESHOOTING
63 SPECIFICATIONS
72 IR CODES
73 CONTROLLING THE MULTIPLE
PRODUCT
73 Connecting the cable
73 RS-232C Configurations
73 Communication Parameter
74 Command Reference List
76 Transmission / Receiving Protocol

ENGLISH
4LICENSES
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified device must be registered in order to play purchased DivX Video-
on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX Certified to play DivX video up to HD 1080p, including premium
content.
DivX , DivX Certified and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.

5
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
yDo not use any unapproved or counterfeit parts or accessories to ensure the safety and product life
span.
yAny damages or injuries by using pirated items are not covered by the warranty.
yThe accessories supplied with your product may vary depending on the model.
yProduct specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
Remote control and Batteries Power Cord IR Receiver
CD (Owner's Manual)/
Card
D-sub 15 pin signal cable Mounting Cable Tie
CAUTION
NOTE
P
A
G
E
INPUT
ENERGY
SAVING
MARK
ARC
ON
OFF

. , !

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

1/a/A

- * #
WXYZ
CLEAR
MONITOR
PSM
AUTO
MUTE
BRIGHT
NESS
MENU
POWER
OK
S.MENU
ID
BACK TILE
ON OFF
EXIT

6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
yCable holder/Cable tie may not be available in some areas or for some models.
yOptional accessories are not included for all models.
ST-200T
Stand
Screws
: Diameter 4.0 mm x Pitch 0.7 mm x
Length 10 mm(Included Spring Washer)
Cable holder/
Cable Tie
Screws
Diameter 4.0 mm x Pitch 0.7 mm x
Length 8 mm(Included Spring Washer)
SP-2000
Speaker
NOTE
Stand kit Speaker kit
Media Player kit
CD (Owner's Manual)/
Card
Media Player Screws

7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Parts and buttons
Screen Marks Description
INPUT Changes the input source.
MENU Accesses the main menus, or saves your input and exits the menus.
Adjust the up and down.
Adjusts the volume level.
AUTO/SET Displays the current signal and mode.
Press this button to adjust the screen automatically (available only in RGB mode)
/ITurns the power on or off.
Connection panel
Screen Buttons/ Screen Marks

8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Connecting the Speakers
- Only on some models.
1Connect an input signal cable to use before
installing the speakers.
3After installing your speakers, use holders and
cable ties to organize the speaker cables.
2Mount the speaker by using a screw as shown
in the following. Then connect the speaker
cable.
Using the Mounting Cable
Tie
First, connect the input signal cable to be used.
Insert the cable tie into the bottom hole on the
back as shown in the figure to organize cables.

9
ENG
ENGLISH
ASSEMBLING AND PREPARING
2Use the screws to secure the stand on the rear
side of the product as shown in the diagram.
Connecting the stand
- Only on some models.
1Place a soft cloth on the table and put the
product with the screen facing downward.
Connect the stand as shown in the following
picture.
Using the IR Receiver
IR Receiver cable
This allows a remote control sensor to be placed
in a custom location. Then that display can control
other displays via an RS-232C cable. Install the IR
receiver towards the front of the set.
yWhen you see from the back of the set, if
the IR receiver cable does not face front, the
signal reception range may shorten.
yThe IR receiver is made with a magnet.It is
detachable at the bottom (typical installation)
or back (wall installation) of the set.
yMake sure the power cable is disconnected.
NOTE

10
ENG
ENGLISH
ASSEMBLING AND PREPARING
Portrait Layout
To install in portrait mode, rotate the set
counterclockwise 90 degrees when looking at from
the front.
Using the Kensington
security system
The Kensington security system connector is
located at the back of the Monitor. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the Monitor and a table.
yThe Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
NOTE