LG S3RF User manual

DWG.
No.
TRIG.
DR COMPLETED
도면 DR 완료
완료일 : 20.06.24
LG 전자 (주)
LG Electronics Inc.
UNIT SCALE 11 mm
REVIEWEDDESIGNED
RELATED DWG.
CHECKED APPROVED
예리효
20.06.24
이갑선 이창훈
MODELING I
T
L
E
T
APPROVED
승인자
PREPARED
시방자
DATE
년/월/일
REF. NO.
시방 번호
REV. NO.
기호
REVISION DESCRIPTION
변경 사항
4
3
2
6
5
1
RELEASING THIS DRAWING
WITHOUT PERMISSION LG
Electronics SHOULD BE
ACCUSED ACCORDING TO THE
LAWS AND COMPANY RULES.
이 도면은 LG전자의 자산으로 불법
유출시 관계법과 회사규정에 의해 처벌됨.
PDF
ILLUSTRATOR
841 841
210
MFL66101264
MANUAL,OWNER’S
ESSENCE 1/1
MFL66101264
가
가
P/NO. 다
<FRONT> <BACK>
나
WORK
가
BRAND
64
나
MODEL
다
P/NO.
MATERIAL AND PRINTING DESCRIPTION
PRINTING DEGREE
EXTERIER INTERIER
LG MODEL 명
SUFFIX
LANGUAGE
PAGE
REMARK
SEC.
LG MFL66101264 1 1
EN
48
모조지 80g OFFSET 인쇄
ESSENCE
S3*F ALWPEIL
S3WF
7
20.06.24 20.06.24
WEEE 내용 추가 EAGK800181 20.08.14 예리효 이창훈

OWNER'S MANUAL
STYLER
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that the
product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
EN ENGLISH
S3*F*
MFL66101264
Rev.01_081320
www.lg.com
Copyright © 2020 LG Electronics Inc. All Rights Reserved.
global_main.book.book Page 1 Thursday, August 13, 2020 5:29 PM

TABLE OF CONTENTS
This manual may contain images or
content that may be different from the
model you purchased.
This manual is subject to revision by the
manufacturer.
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE...........................................................3
WARNING STATEMENTS....................................................................................3
CARING FOR THE ENVIRONMENT....................................................................9
INSTALLATION
Parts and Specifications ..................................................................................11
Installation Place Requirements ....................................................................13
Unpacking the Appliance ................................................................................15
Levelling the Appliance ...................................................................................16
OPERATION
Operation Overview.........................................................................................19
Preparing Loads ...............................................................................................20
Checking the Items before Every Load .........................................................21
Loading the Appliance.....................................................................................22
Control Panel ....................................................................................................29
Programme Table ............................................................................................31
Option Programmes and Extra Functions ....................................................36
SMART FUNCTIONS
LG ThinQ Application.......................................................................................38
Smart Diagnosis ...............................................................................................40
MAINTENANCE
Regular Cleaning..............................................................................................41
TROUBLESHOOTING
Before Calling for Service................................................................................43
global_main.book.book Page 2 Thursday, August 13, 2020 5:29 PM

3 SAFETY INSTRUCTIONS EN
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
The following safety guidelines are intended to prevent unforeseen
risks or damage from unsafe or incorrect operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as
described below.
Safety Messages
WARNING STATEMENTS
WARNING
• To reduce the risk of fire or explosion, electric shock, property
damage, injury to persons or death when using this appliance, follow
basic safety precautions, including the following:
Technical Safety
• This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
This symbol is displayed to indicate matters and operations
that can cause risk.
Read the part with this symbol carefully and follow the
instructions in order to avoid risk.
WARNING
This indicates that the failure to follow the instructions can
cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can
cause the minor injury or damage to the appliance.
global_main.book.book Page 3 Thursday, August 13, 2020 5:29 PM

4 SAFETY INSTRUCTIONS EN
• Children should be supervised to ensure that they do not play with
the appliance.
• Do not, under any circumstances, cut or remove the ground prong
from the power cord. To prevent personal injury or damage to the
appliance, the electrical power cord must be plugged into a properly
grounded outlet.
• This appliance must be plugged into a 220-240 VAC, 50-Hz grounded
outlet protected by a 15-ampere fuse or circuit breaker. Failure to
follow these instructions can result in fire, explosion, or death.
• This appliance must be plugged into a properly grounded outlet.
Electrical shock can result if the appliance is not properly grounded.
Have the wall outlet and circuit checked by a qualified electrician to
make sure the outlet is properly grounded. Failure to follow these
instructions can create an electric shock hazard and/or a fire hazard.
• Install the appliance where the plug is easily accessible. Unplug the
appliance when not in use to avoid risk of fire or electric shock.
• Unplug the appliance before disassembly or repair to avoid risk of
electric shock.
• The appliance should always be plugged into its own individual
electrical outlet which has a voltage rating that matches the rating
plate. This provides the best performance and also prevents
overloading house wiring circuits which could cause a fire hazard
from overheated wires.
• Do not use an extension cord to connect to an outlet. Doing so could
result in a fire or electric shock.
• Never unplug your appliance by pulling on the power cord. Always
grip the plug firmly and pull straight out from the outlet. The power
cord can be damaged, resulting in a risk of fire and electric shock.
• Contact LG or a qualified repair person immediately to repair or
replace all power cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion damage
along its length or at either end. The power cord can melt, creating
electric shock and/or fire hazard.
global_main.book.book Page 4 Thursday, August 13, 2020 5:29 PM

5 SAFETY INSTRUCTIONS EN
• When installing or moving the appliance, be careful not to pinch,
crush, or damage the power cord. This will prevent injury and
damage to the appliance from fire and electric shock.
Installation
• When moving the appliance away from the wall, be careful not to roll
over or damage the power cord.
• The appliance is heavy. Two or more people are necessary to move
and install the appliance to prevent damage or injury.
• Prior to use, ensure that you are connecting the appliance to a
dedicated grounded electrical outlet rated for use with the appliance.
It is the user’s responsibility to replace a standard 2-prong wall outlet
with a standard 3-prong wall outlet.
• Before use, the appliance must be properly installed as described in
this manual. Electric shock can result if the appliance is not properly
grounded.
• Do not install the appliance where there may be a danger of the
appliance falling. The appliance is not designed for use on
transportations such as ship and airplane. Check with an authorized
LG service centre for use under other special circumstances.
• Do not tamper with controls.
• Install the appliance where the floor is firm and level. The appliance
may vibrate excessively and eventually fall if installed on an unstable
surface, causing damage or injury.
• Do not truck the appliance from the front side and keep the front side
protected always. Failure to do so the tempered glass on the
appliance may be broken.
• Properly ground the appliance to conform with all governing codes
and ordinances. Follow the details in the installation instructions.
• Install and store the appliance where it will not be exposed to
temperatures below freezing or exposed to the weather. Allow the
appliance to warm to room temperature before use if it was delivered
in winter or at sub-zero temperature.
global_main.book.book Page 5 Thursday, August 13, 2020 5:29 PM

6 SAFETY INSTRUCTIONS EN
• Do not repair or replace any part of the appliance or attempt any
servicing unless specifically recommended in the user-maintenance
instructions or in published user-repair instructions that you
understand and have the skills to carry out.
• To reduce the risk of electric shock, do not install the appliance in
humid spaces such as a bathroom. Failure to follow this warning can
cause death, serious injury, fire, electric shock, or product
deformation or malfunction.
• Remove all packing items and dispose of all shipping materials
properly.
• Connect to a properly rated, protected, and sized power circuit to
avoid electrical overload. Improper power circuits can melt, creating
electric shock and/or fire hazard.
• If the supply cord is damaged, it must be replaced by the
manufacturer or its service agents or similarly qualified person in
order to avoid a hazard.
• Keep all packaging from children. Packaging material can be
dangerous for children.
• Do not install near another heat source such as a stove, oven or
heater.
• Do not place candles, smoking materials, or other flammables on top
of the appliance.
• Remove all protective vinyl film from the appliance.
• The appliance shall be installed in accordance with national wiring
regulations.
Operation
• Do not allow children to play on or in the appliance. Close supervision
of children is necessary when the appliance is used near children.
• Do not climb, stand, or hang on the appliance door or on the shelf or
anywhere inside the appliance.
• Do not step on the doors to the water tanks.
• Do not place heavy or dangerous objects on top of the appliance.
global_main.book.book Page 6 Thursday, August 13, 2020 5:29 PM

7 SAFETY INSTRUCTIONS EN
• Do not put live animals inside the appliance.
• Do not allow children to climb into the appliance.
• In the event of a gas leak (propane/LPG), ensure adequate ventilation
and contact an authorized service centre before resuming use. Do
not touch or disassemble the electrical outlet of the appliance.
• Do not use or place flammable substances (chemicals, medicine,
cosmetics, etc.) near the appliance or store them inside the appliance.
Do not place the appliance in the vicinity of flammable gas.
• Disconnect the power cord immediately if you hear a noise, smell a
strange odour or detect smoke coming from the appliance.
• In the event of a flood, do not go near the appliance and contact an
authorized service centre.
• Do not use fabric softeners or products to eliminate static unless
recommended by the manufacturer of the fabric softener or product.
• Do not place hands or body near steam nozzle during operation. The
steam is hot and could cause an injury.
• Do not insert objects into the steam nozzle.
• Do not drink the water from the water drain and supply tanks.
• Do not disassemble or modify the appliance.
• Do not put hands, feet, or metal objects below the appliance.
• Do not operate the appliance or touch the power cord with wet
hands.
• Keep fingers out of pinch point areas; clearances between the door
and cabinet are necessarily small. Be careful closing door when
children are nearby.
• Do not place items exposed to cooking oils in the appliance. Items
contaminated with cooking oils may contribute to a chemical reaction
that could cause a load to catch fire.
• Do not dry articles that have been previously cleaned in, washed in,
soaked in, or spotted with gasoline, dry-cleaning solvents, or other
flammable or explosive substances, as they give off vapors that could
ignite or explode.
global_main.book.book Page 7 Thursday, August 13, 2020 5:29 PM

8 SAFETY INSTRUCTIONS EN
• Do not use heat to dry articles containing foam rubber or similarly
textured rubber-like materials.
• Do not open door during operation. The performance of the
appliance may be adversely affected. If the appliance is installed on
or near carpet, condensation from escaping hot air or steam may
stain or damage the carpet.
• Damage incurred by using the appliance for purposes other than
those specified in this user manual is not covered by the warranty.
Maintenance
• Wipe foreign objects (such as dust and water) off the prongs of the
power plug and contact areas regularly. Do not use a wet or damp
cloth when cleaning the plug.
• Do not use an appliance to dry the interior. Do not light a candle to
remove interior odours.
• Do not spray water onto the appliance directly when cleaning. A fire
or electric shock may occur.
• Wipe the interior with a dry cloth after use.
• Clean the lint filter before or after each load.
• Do not use a bleaching agent such as oxygen or chlorine-based
bleaches on the exterior of the appliance.
• Do not use sharp objects when cleaning or operating the controls. An
electric shock may occur.
• Avoid hitting the front glass panel with heavy objects. Although it is
made of tempered glass, the panel may break in the event of a strong
impact and cause injury.
• Keep product free from rodents, insects, and other foreign objects.
They may damage wires, causing fire or electric shock.
Disposal
• Before the appliance is removed from service or discarded, remove
the door to the drying compartment. Cut off the power plug and
destroy the button section to prevent reuse.
global_main.book.book Page 8 Thursday, August 13, 2020 5:29 PM

9 SAFETY INSTRUCTIONS EN
Grounding instructions
• Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician or
service person if you are in doubt that the appliance is properly
grounded.
• This appliance must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current.
• This appliance must be equipped with a cord having an equipment
grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
• Do not modify the plug. If it does not fit the outlet, have a proper
outlet installed by a qualified electrician.
• This appliance must be connected to a grounded metal, permanent
wiring system or an equipment-grounding conductor must be run
with the circuit conductors and connected to the equipment
grounding terminal or lead on the appliance. Electric shock can result
if the appliance is not properly grounded.
CARING FOR THE ENVIRONMENT
Disposal of Your Old Appliance
• Do’s
- a. The product is required to be handed over only to the authorized
recycler for disposal.
- b. Keep the product in isolated area, after it becomes non-
functional/unrepairable so as to prevent its accidental breakage.
• When this crossed out wheeled bin symbol is depicted on
the product and its operator’s manual, it means the
product is covered by the e-waste Management and
Handling Rules, 2011 and are meant to be recycled,
dismantled, refurbished or disposed off.
global_main.book.book Page 9 Thursday, August 13, 2020 5:29 PM

10 SAFETY INSTRUCTIONS EN
• Don’t
- a. The product should not be opened by the user himself/herself,
but only by authorized service personnel.
- b. The product is not meant for re-sale to any unauthorized
agencies/scrap dealer/kabariwalah.
- c. The product is not meant for mixing into household waste
stream.
- d. Do not keep any replaced spare part(s) from the product in
exposed area.
• Any disposal through unauthorized agencies/person will attract
action under Environment (Protection) Act 1986.
• This product is complied with the requirement of Hazardous
Substances as specified under Rule 13 (1) & (2) of the E-Waste
(Management & Handling) Rules, 2011.
• To locate a nearest collection centre or call for pick-up (limited area
only) for disposal of this appliance, please contact Toll Free No. 1800-
315-9999 / 1800-180-9999 for details. All collection centre and pick up
facilities are done by third parties with LG Electronics India Pvt. Ltd.
Merely as a facilitator. For more detailed information , please visit :
http://www.lge.com/in
global_main.book.book Page 10 Thursday, August 13, 2020 5:29 PM

11 INSTALLATION EN
INSTALLATION
Parts and Specifications
NOTE
• Appearance and specifications may vary without notice to improve the quality of the appliance.
Interior
a Interior light
b Moving hanger
c Shelf holder
d Shelf
e Aroma filter
f Hot air circulation vent
g Water drain tank
h Drip tray
i Hooks for pants crease care
j Pants crease care
k Door
*1
l Clip
m Steam nozzle
n Water supply tank
*1 The door swing can be reversed by the installer
to fit the installation location.
global_main.book.book Page 11 Thursday, August 13, 2020 5:29 PM

12 INSTALLATION EN
Specifications
Asterisk(s) means model variant and can be varied (0-9) or (A-Z).
Accessories
*1 An ordinary metal/plastic hanger can be used if the hook is less than 4 mm thick. The hook must fit in
the indentation in the moving hanger snugly. If the fit is too loose, it may result in vibration, noise, and
damage to clothing.
NOTE
• Contact the store where the appliance was purchased or LG customer service if any accessories are
damaged or missing.
Model S3*F*
Power Supply 220 - 240 V~, 50 Hz
Dimensions (Width × Depth × Height) 445 mm × 585 mm × 1850 mm, 1010 mm (Depth
with door open)
Product weight 78 kg
Power consumption 1700–1900W
Maximum capacity 4 items
a Shelf b Drip tray
c 2 pieces of Hangers
*1
d Pants Hanger
*1
e 2 pieces of Anti-Slip Sheets f 2 pieces of Rear cap covers
g Anti-tip kit h Wrench i 2 pieces of Hinge Covers
global_main.book.book Page 12 Thursday, August 13, 2020 5:29 PM

13 INSTALLATION EN
• For your safety and for extended product life, use only authorized components. The manufacturer is not
responsible for product malfunction or accidents caused by the use of separately purchased
unauthorized components or parts.
Installation Place
Requirements
Before installing the appliance, check the following
information to make sure that the appliance
should be installed in a correct place.
Installation Location
• A grounded electrical outlet should be located
within 61 cm of either side of the appliance.
• Install the appliance on a flat floor. (Allowable
slope under the appliance: 1°)
• The floor must be level, with a maximum slope of
2.5 cm under the appliance. If the slope is
greater than 2.5 cm, the appliance cannot be
levelled properly.
• Ensure that when the appliance is installed, it is
easily accessible for an engineer in the event of a
breakdown.
• Do not install the appliance in an area where it
will be exposed to water and/or weather. Failure
to follow this warning could result in risk of
electric shock, injury, or product damage or
malfunction.
• Do not install the appliance on a hollow or
flexible platform. Doing so may cause excessive
noise and vibration and result in damage or
injury if the appliance tips over.
NOTE
• A sturdy floor should support the total appliance
weight of
78 kg . The combined weight of any
other laundry appliances should also be
considered.
Dimensions
Recommended Installation
Spacing
The following clearances are recommended for the
appliance. Although the appliance has been tested
for clearances of 3 cm on the sides and rear,
Dimensions (mm)
A 385
B 1435
C 415
D52
E 1850
F 445
G 585
global_main.book.book Page 13 Thursday, August 13, 2020 5:29 PM

14 INSTALLATION EN
recommended clearances should be considered
for the following reasons:
a Allow at least 46 cm in front to open the door.
b Allow at least 5 cm on both sides and between
the back of the appliance and the wall.
c Allow at least 20 cm between the top of the
appliance and any overhanging shelves or
cabinets.
NOTE
• If the appliance is too close to adjacent items,
performance may decrease and electricity
consumption may increase.
• Additional space should be considered on all
sides of the appliance to reduce noise transfer.
Installation Spacing for
Recessed Area or Closet
Installation
There should be at least a little space around the
appliance (or any other appliance) to avoid contact
with walls, furniture, or other appliances during
operation. Allow a minimum of 3 cm on all sides of
the appliance to avoid increased noise or damage.
Dimensions (mm)
A 650
B
2 455
C
2 250
D
2 1889
E
2 1875
F
2 400
G
2 50
H
2 630
I
2 485
115˚
B
A
C
B
I H
E
D
F
GJ
K
L
L
global_main.book.book Page 14 Thursday, August 13, 2020 5:29 PM

15 INSTALLATION EN
NOTE
• For closet installation, with a door, minimum
ventilation openings in the top and bottom of
the door are required. Louvered doors with
equivalent ventilation openings are acceptable.
• Minimum vent opening for built-in installation is
200 cm
2
.
Closet Ventilation
Requirements
Closets with doors must have both an upper and
lower vent to prevent heat and moisture build-up
in the closet.
One example shown uses vent grilles in the door.
a Upper vent opening with a minimum opening of
310 cm
2
must be installed no lower than 185 cm
above the floor.
b Lower vent opening with a minimum opening of
155 cm
2
must be installed no more than one
foot above the floor.
Electrical Connection
• Do not use an extension cord or double adapter.
• Do not overload the outlet with more than one
appliance.
• Connect the appliance to an earthed socket in
accordance with current wiring regulations.
• The appliance must be positioned a place close
to outlet sockets so that the plug is easily
accessible.
WARNING
• The power plug must be plugged into an
appropriate outlet socket that is installed and
grounded/earthed in accordance with all local
codes and ordinances.
Ambient Temperature
• Temperature must be between 10 °C and 35 °C.
• If the ambient temperature is too low or high,
performance may be affected.
• Do not install in direct sunlight or where the
temperature may fall below 0 °C.
Unpacking the Appliance
WARNING
• Use two or more people to unpack and move the
appliance. Failure to do so can result in serious
injury by tipping the appliance.
Removing carton and shipping
materials
Unpack the appliance from carton then remove
any tapes and temporary labels from the
appliance.
• Do not remove any warning labels, the model
and serial number label, or the technical sheet
label that is located under the front of the
appliance.
J
2 50
K
2 20
L
2 30
Dimensions (mm)
7.6 cm
7.6 cm
7.6 cm
7.6 cm
7.6 cm
7.6 cm
global_main.book.book Page 15 Thursday, August 13, 2020 5:29 PM

16 INSTALLATION EN
CAUTION
• Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the
surface of the appliance.
NOTE
• Tape or glue residue can also be easily removed
by rubbing a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with
warm water and dry.
Moving the appliance
Use the wheels a at the bottom of the appliance to
move the appliance. Push the appliance slowly
from about halfway down the front side.
CAUTION
• Keep the appliance upright when moving it. If
you lay the appliance on its side, refrigerant may
leak and cause the appliance to malfunction.
Levelling the Appliance
Checking the Level
Levelling the appliance prevents unnecessary
noise, vibration and movement. Check whether the
appliance is perfectly level after installation.
Adjusting and Levelling the
appliance
WARNING
• The appliance is heavy. Two or more people are
required when levelling the appliance. Failure to
follow this warning can cause serious injury or
death.
1 Position the appliance in the final location and
check to make sure it is level.
• All levelling feet must rest solidly on the
floor. Gently push on the corners of the
appliance to make sure that it does not rock
from corner to corner. Make sure there are
no gaps between the front levelling feet and
the floor.
2 Use the wrench (packaged with the appliance)
to turn the levelling feet.
• Unscrew the front feet to raise the appliance
or screw in the feet to lower it. If unable to
level the appliance using only the front feet,
install the two rear levelling feet by tipping
the appliance. Do not lay the appliance down
to install the levelling feet.
• Raise or lower the appliance using the
levelling feet until the appliance is level from
side to side and front to back.
CAUTION
• Make sure that all levelling feet are in firm
contact with the floor. If the appliance is used
without levelling, it may fall, causing injury,
damage, or product malfunction.
• Adjust the levelling feet only as far as necessary
to level the appliance. Extending the levelling
global_main.book.book Page 16 Thursday, August 13, 2020 5:29 PM

17 INSTALLATION EN
feet more than necessary can cause the
appliance to vibrate.
3 When the appliance is completely stable and all
levelling feet are resting solidly on the floor,
tighten the locking nuts
a .
Reversing the door
It is possible to reverse the direction of the door
swing. This should be done by the installer at the
time of installation, if desired.
NOTE
• If the direction of the door swing needs to be
changed after installation, contact the LG
Customer Information Centre.
Using Anti-Slip Sheets
Anti-slip sheets prevent the appliance from
shaking or shifting when opening or closing the
door.
1 Clean the floor to attach the anti-slip sheets.
• Use a dry rag to remove and clean foreign
objects or moisture. If moisture remains, the
anti-slip sheets may slip.
2 Adjust the level after placing the appliance in
the installation area.
3 Place the adhesive side a of the anti-slip
sheets on the floor.
4 Put the appliance on the anti-slip sheets.
• Do not attach the adhesive
a of anti-slip
sheets to the feet of the appliance.
5 Recheck the appliance’s levelness.
• Push or rock the edges of the appliance
gently to make sure that the appliance does
not rock. If the appliance rocks, level the
appliance again.
NOTE
• The pads may leave a sticky residue when they
are removed. The residue can be removed with
alcohol.
Installing the anti-tip device
Install the anti-tip device packed with the appliance
to reduce the risk of tipping.
• Refer to the instructions provided with the anti-
tip kit for proper anti-tip device installation.
• Do not operate the appliance without the anti-tip
device in place and engaged.
• Check that the anti-tip device is properly
installed. With the appliance in its final location,
make sure that the slide adjuster on the cord is
adjusted until there is about 2.5 cm of slack in
the cord.
• If an anti-tip device is not properly installed, the
appliance could be unexpectedly tipped by a
child or adult standing, sitting, leaning, or
placing excessive weight on an open door or the
interior parts.
global_main.book.book Page 17 Thursday, August 13, 2020 5:29 PM

18 INSTALLATION EN
• The use of the anti-tip device does not preclude
tipping of the appliance when it is not properly
installed.
Assembling the drip tray
Before using the appliance, insert the drip tray
onto the bottom of the cabinet.
1 Hold the tray so the arrow and letter on the
front of the tray face up.
2 Insert one side of the tray first, then the other.
Push the tray until it slides completely in.
3 To detach, pull one side out then the other.
• If the tray collects water, detach it and empty
the water. After emptying it, reassemble the
tray.
CAUTION
• Do not operate the appliance without installing
the drip tray. Doing so could lead to water
damage caused by leaking.
Installing cap covers
1 Line up the nubs on the cap cover with the
holes in the top corner of the cabinet and then
snap the cap cover into place.
2 Repeat with the remaining cap cover on the
other corner.
Installing hinge covers
1 Open the appliance door.
2 Snap the hinge cover onto the upper hinge
assembly with the bent edge on the far side
from the hinge.
3 Repeat with the remaining hinge cover on the
lower hinge assembly.
global_main.book.book Page 18 Thursday, August 13, 2020 5:29 PM

19 OPERATION EN
OPERATION
Operation Overview
Using the Appliance
1 Prepare items.
• Wash clothes first, if needed.
• No heat-sensitive items or items that can be
damaged by exposure to water.
• Place items on hangers or the shelf.
• Fasten buttons and close zippers to keep
items on moving hangers and prevent
damage.
2 Clean the lint filter and change the sheet in
the aroma filter.
• Lift out filter and remove lint from last load
for faster and more efficient performance.
Reinstall filter, checking alignment when
closing grill. Do not operate the appliance
without the lint filter in place. If using a fabric
softener sheet in the aroma filter, change it
after every use.
3 Check the water tanks.
• Fill water supply tank if needed. Empty water
drain tank if needed. Use clean tap water in
the supply tank for better product
performance and lifespan. Do not use
distilled water or reuse water from the drain
tank.
4 Load the appliance.
• Pay attention to fabric care labels and
programme choice. If clothing is not
appropriate for the programme selected, it
may shrink or be seriously damaged.
• Remove all empty hangers to avoid noise,
friction, and damage to clothing.
5 Turn on the appliance.
• Touch Power button to turn on the
appliance.
6 Choose a desired programme.
• Touch a programme selector button. You
can toggle to one of the settings each time
you pressed the button.
7 Begin a programme.
• Touch and hold Start/Pause button to begin
a programme. Pause programme at any
time by touching
Start/Pause button again.
Restart programme within 14 minutes of
pausing it, or the appliance shuts off and
settings are lost.
• Do not open door during programme. If
steam or hot air escapes from open door,
condensation may collect on floor or walls,
resulting in damage or mold.
CAUTION
• Do not open the door during operation. There is
a risk of burns or injury from escaping hot air or
steam.
• Do not allow steam or hot air to escape the
cabinet during operation. Opening the door
during operation also affects performance,
lengthens styling time, and results in water
condensing and collecting on the floor.
8 End of programme.
• Remove items when programme finishes.
Leave door open to let hot air escape.
Interior light shuts off after 1.5 minutes if
door is left open.
global_main.book.book Page 19 Thursday, August 13, 2020 5:29 PM