LG 32LF580B User manual

Please read this manual carefully before operating your set and
retain it for future reference.
32LF580B
32LF5800
42LF5800
50LF6]O0
55LF6]00
60LF6]O0
* M F L 6 8 6 8 0 2 0 5 *
www.[g.com
P/NO : MFL68680205 (1502=REVO0)

important Safety instructions
Always comply with the following precautions
to avoid dangerous situations and ensure peak
performance of your product.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
• Do not use this apparatus near water.
TO REDUCETHE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
1_ he lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence of
uninsulated dangerous voltage within the
product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important operating
and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING/CAUTION
-TO REDUCETHE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCTTO
RAIN OR MOISTURE.
_WARNING
If you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.
_ CAUTION
If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
The note helps you understand and use the
product safely. Please read the note carefully
before using the product.
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
•Only use attachments/accessories specified by the
manufacturer.
WARNING:This product contains chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling,
•Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over. ®

+ Unplug this apparatus during lightning storms or
when unused for long periods of time. such as gasoline or candles, or expose the TV to direct air conditioning.
• Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Do not expose to dripping or splashing and do not
place objects filled with liquids, such as vases, cups,
etc+on or over the apparatus (e.g., on shelves above
the unit).
+ Do not press strongly upon the panel with a hand or
a sharp object such as a nail, pencil, or pen, or make
a scratch on it.
+ Do not stick metal objects or any other conductive
material into the power cord. Do not touch the end
of the power cord while it is plugged in.
+ Keep the packing anti-moisture material or vinyl
packing out of the reach of children. Anti-moisture
material is harmful if swallowed. If swallowed, induce
vomiting and go to the nearest hospital. Additionally,
vinyl packing can cause suffocation. Keep it out of
the reach of children.
+ CAUTION concerning the Power Cord
(Can differ by country):
Check the specification page of this owner's manual
to be certain. Do not connect too many appliances
to the same AC power outlet as this could result in
fire or electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service. Protect
the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord
exits the appliance. Do not move the TV with the
power cord plugged in. Do not use a damaged or
loose power cord. Be sure do grasp the plug when
unplugging the power cord. Do not pull on the
power cord to unplug the TV.
+Warning - To reduce the risk of fire or electrical
shock, do not expose this product to rain, moisture
or other liquids. Do not touch the TV with wet hands.
Do not install this product near flammable objects
Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire
to prevent possible electric shock (ke. aTV with a
three-prong grounded AC plug must be connected
to a three-prong grounded AC outlet). If grounding
methods are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone wires,
lightning rods, or gas pipes.
As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if the unit is turned off+
Do not attempt to modify this product in any way
without written authorization from LGElectronics.
Unauthorized modification could void the user's
authority to operate this product.
Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power circuits,
or where it can come in contact with such power
lines or circuits as death or serious injury can
occur. Be sure the antenna system is grounded to
provide some protection against voltage surges
and built-up static charges. Section 810 of the
National Electrical Code (NEC) in the U.S.A. provides
information with respect to proper grounding of
the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes
and requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Antenna DEscharge Unff
+,o++ ,.................,
Ground.,g Conductor
: ,:i:n_ (................. )
Gtoun C PowerServlceGroun_it_g
Electrode System
NEC: National Eteetr[eal Code (NEC Art 250, Part t4)

Cleaning
When cleaning, unplug the power cord and wipe
gently with a soft cloth to prevent scratching. Do
not spray water or other liquids directly on the
TV as electric shock may occur. Do not clean with
chemicals such as alcohol, thinners, or benzine.
Moving
Make sure tile product is turned off, unplugged, and
all cables have been removed. It may take 2 or more
people to carry larger TVs. Do not press or put stress
on the front panel of the TM
• Ventilation
Install your TV where there is proper ventilation. Do
not install in a confined space such as a bookcase. Do
not cover the product with cloth or other materials
while plugged. Do not install in excessively dusty
places.
If you smell smoke or other odors coming from
the TV, unplug the power cord and contact an
authorized service center.
Keep the product away from direct sunlight.
Never touch this apparatus or antenna during a
lightning storm.
When mounting a TV on the wall, make sure not to
install the TV by hanging the power and signal cables
on the back of the TM
Do not allow an impact shock or any objects to fall
into the product, and do not drop anything onto the
screen.
DISCONNECTING THE DEVICE FROM THE MAIN
POWER
The power plug is the disconnecting device. In
case of an emergency, the power plug must remain
readily accessible.
Batteries
Store the accessories (battery, etc.) in a safe location
out of the reach of children.
This apparatus uses batteries. In your community
there might be regulations that require you
to dispose of these batteries properly due to
environmental considerations. Please contact your
local authorities for disposal or recycling information.
Do not dispose of batteries in a fire.
Do not short circuit, disassemble, or allow the
batteries to overheat.
Do not use high voltage electrical equipment near
the TV, (e.g., bug zapper).This may result in product
malfunction.
Dot Defect
The panel is ahigh technology product with
resolution of two million to six million pixels. In
a very few cases, you could see fine clots on the
screen while you're viewing the TM Those dots are
deactivated pixels and do not affect the performance
and reliability of the TV.
Generated Sound
Cracking noise A cracking noise that occurs when
watching or turning off the TV is generated by
plastic thermal contraction due to temperature and
humidity. This noise is common for products where
thermal deformation is required.
Electrical circuit humming/panel buzzing
A low level noise is generated from a high-speed
switching circuit, which supplies a large amount of
current to operate a product. It varies depending
upon the product. This generated sound does not
affect the performance and reliability of the product.
Take care not to touch the ventilation openings.
When watching the TV for a long period, the
ventilation openings may become hot. This does
not affect the performance of the product or cause
defects in the product.
Do not install this product on a wall if it could be
exposed to oil or oil mist. This may damage the
product and cause it to fall.
If the TV feels cold to the touch, there may be a small
flicker when it is turned on. This is normal; there is
nothing wrong with TM Some minute dot defects
may be visible on the screen, appearing as tiny red,
green, or blue spots. However, they have no adverse
effect on the TV's performance. Avoid touching the
LCD screen or holding your finger(s) against it for
long periods of time. Doing so may produce some
temporary distortion effects on the screen.
Preventing image burn or burn=in
on your TV screen
If a fixed image displays on the TV screen for a long
period of time, it will be imprinted and become a
permanent disfigurement on the screen. This is image
burn or burn-in and not covered by the warranty.
If the aspect ratio of the TV is set to 4:3 for a long
period of time, image burn may occur on the
letterboxed area of the screen.
Avoid displaying a fixed image on the TV screen for
a long period of time (2 or more hours for LCD, 1
or more hours for the Plasma TV) to prevent image
burn.
FCC Notice
(For USA)
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment offand on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the

equipmentandthereceiver.
-Connecttheequipmenttoanoutletona
circuitdifferentfromthattowhichthereceiver
isconnected.
-Consultthedealeroranexperiencedradio/TV
technicianforhelp.
Thisdevicecomplieswithpart15oftheFCCRules.
Operationissubjecttothefollowingtwoconditions:
(1)thisdevicemaynotcauseharmfulinterference
and(2)thisdevicemustacceptanyinterference
received,includinginterferencethatmaycause
undesiredoperationofthedevice.
Anychangesormodificationsinconstructionof
thisdevicewhicharenotexpresslyapprovedby
thepartyresponsibleforcompliancecouldvoidthe
user'sauthoritytooperatetheequipment.
FCC Radio Frequency interference
Requirements (for UNII devices)
High power radars are allocated as primary users
of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.
These radar stations can cause interference with
and/or damage this device. This device cannot be
co-located with any other transmitter.
FCCRFRadiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment.This transmitter must not be co-
located or operating in conjunction with any other
antenna or transmitter.
This equipment should be installed and operated
with minimum distance 20 cm (7.8 inches) between
the antenna and your body. Users must follow the
specific operating instructions for satisfying RF
exposure compliance.
Industry Canada Statement
(For Canada)
[For having wireless function (WLAN, Bluetooth,...)]
This device complies with RSS-210 of the Industry
Canada Rules. Operation is subject to the following
two conditions:
1. this device may not cause interference and
2. this device must accept any interference,
including interference that may cause undesired
operation of the device.
IC Radiation Exposure Statement
(For Canada)
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with minimum distance 20 cm (7.8 inches) between
the antenna and your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD
VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
AWARNING
(For Canada)
[For product having the wireless function using
5 GHz frequency bands]
The device for operation in the band 5150-5250
MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite
systems;
The maximum antenna gain permitted for devices in
the bands 5250-5350 MHz and 5470-5725 MHz shall
comply with the EIRPlimit; and
The maximum antenna gain permitted for devices in
the band 5725-5825 MHz shall comply with the EIRP
limits specified for point-to-point and non point-to-
point operation as appropriate.
High-power radars are allocated as primary users
(i.e., priority users) of the bands 5250-5350 MHz
and 5650-5850 MHz and that these radars could
cause interference and/or damage to LE-LAN
devices.
Note to Cable/TV Installer
(For USA and Canada)
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the National
Electric Code (U.S.A.).The code provides guidelines
for proper grounding and, in particular, specifies
that the cable ground shall be connected to the
grounding system of the building, as close to the
point of the cable entry as practical.
LGRecycling Policy
(For USA)
LG Electronics offers a customized e-waste takeback
and recycling service that meets local needs and
requirements in the countries where e-waste
regulations are in place, and also provides product
and packaging take-back and recycling service
voluntarily in some countries. LG Electronics
evaluates products' recyclability at the design step
using LG's recyclability evaluation tool, with the
goal of improving recyclability where practicable.
Through these activities, LG seeks to contribute to
conserving natural resources and protecting the
environment.
For more information about the LG Recycling Policy,
please visit our global site at http.'//www./g.com/
global/sustainability/ environment/take-back-
recycling.

Preparing Optional Extras
NOTE
*Image shown may differ from your TV.
Your TV's OSD (On Screen Display) may differ
slightly from that shown in this manual.
The available menus and options may differ
from the input source or product model that you
are using.
New features may be added to this TV in the
future.
The items supplied with your product may vary
depending upon the model.
Product specifications or contents of this manual
may be changed without prior notice due to
upgrade of product functions.
For an optimal connection, HDMI cables and
USB devices should have bezels less than 10 mm
(0.39 inches) thick and 18 mm (0.7 inches) width.
Use an extension cable that supports USB 2.0 if
the USB cable or USB flash drive does not fit into
your TV's USB port.
Use a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types (3m or less)
- High-Speed HDMI®/TM cable
- High-Speed HDMP/TM cable with Ethernet
__A_< ITIITI(0.39inches)
10
%_/_-._. _A_BZ-18 rnrn(0.7inches)
_CAUTION
Do not use any unapproved items to ensure the
safety and product's lifespan.
Any damages or injuries by using unapproved
items are not covered by the warranty.
Some models appear to have a thin film on the
screen. It is actually part of the screen; do not
remove it.
When attaching the stand to theTV set, place
the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
Make sure that the screws are fastened tightly.
(If they are not fastened securely enough, theTV
may tilt forward after being installed.)
Do not tighten the screws with too much force;
otherwise they may be damaged and come
loose later.
Optional extras can be changed or modified for
quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed
manufacturer's circumstances or policies.
AN-M R500 AN-VC500
Magic Remote Smart Camera
LG Audio Device AN-WF500
Wi-Fi/Bluetooth DONGLE
Maintenance
Cleaning Your TV
Clean your TV regularly to keep it at peak
performance and to extend the product lifespan.
_CAUTION
* Make sure to turn the power off and disconnect
the power cord and all other cables first.
When theTV is left unattended or unused for a
long time, disconnect the power cord from the
wall outlet to prevent possible damage from
lightning or power surges.
Screen, Frame, Cabinet, and Stand
To remove dust or light dirt, wipe the surface with a
dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft
cloth dampened in clean water or a diluted mild
detergent.Then wipe immediately with a dry cloth.
_CAUTION
* Do not push, rub, or hit the surface with your
fingernail or a sharp object, as this may result in
scratches on the screen and image distortions.
Do not use any chemicals, such as waxes,
benzene, alcohol, thinners, insecticides, air
fresheners, or lubricants, as these may damage
the screen's finish and cause discoloration.
Do not spray liquid onto the surface. If water
enters theTV, it may result in fire, electric shock,
or malfunction.
Power Cord
Remove the accumulated dust or dirt on the power
cord regularly.

Lifting and Moving the TV Using the Joystick Button
When moving or lifting theTV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type and
size.
• It is recommended to move theTV in the box or
packing material that the TV originally came in.
• Before moving or lifting theTV, disconnect the
power cord and all cables.
• When holding theTV, the screen _-_
should face away from you to
avoid damage.
• Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grille area.
X
X
• Use at least two people to move
a large TV.
When transporting theTV by
hand, hold theTV as shown in
the following illustration.
When transporting the TV, do not expose the TV
to jolts or excessive vibration.
When transporting the TV, keep the TV upright;
never turn theTV on its side or tilt towards the
left or right.
When handling theTV, be careful notto
damage the protruding joystick button.
/_\ CAUTION
Avoid touching the screen at all times, as this
may result in damage to the screen.
Do not place the product on the floor with its
front facing clown without padding. Failure to do
so may result in damage to the screen.
Do not move theTV by holding the cable holder
or cable management, as the cable holders may
break, and injuries and damage to theTV may
occur. (Depending upon model)
(image shown may differ from your TV.)
You can operate theTV by pressing the button or
moving the joystick left, right, up, or down.
Power On
When theTV isturned off, place
/our finger on the joystick button,
3ress it once and release it.
When theTV isturned on, place
/our finger on the joystick button,
)ress it once for a few seconds, and
'elease it. (However, if the Menu
button is on the screen, pressing
Power Off and holding the joystick button will
Jetyou exit the Menu.)
Volume Control
Channels
ControJ
NOTE
Place your finger on the joystick
button and move it left or right to
adjust the volume level.
Place your finger on the joystick
button and move it up or clown to
adjust the channel.
Move the joystick button up, down, left, or right.
Be careful not to press it. If you press it first, you
may not be able to adjust the volume or scroll
through the channels.
Adjusting the Menu
When theTV is turned on, press the joystick button
one time.You can adjust the menu items moving
the joystick button up, down, left, or right.
the power off.
ses the main menu. (Depending upon
I X _Cle.ar.son-screen displays and returns toTV
!_es the input source.

Mounting on a Table
(I mage shown may differ from your TV.)
1Lift and tilt theTV into its upright position on a
table.
- Leave a 10 cm (4 inches) (minimum) space from
the wall for proper ventilation.
2 Connect the power cord to a wall outlet.
Z_CAUTION
Do not place the TV near or on sources of heat,
as this may result in fire or other damage.
Using the Kensington Security
System (optional)
(Depending upon model)
The Kensington security system connector is located
at the rear of the TV. For more information of
installation and using, refer to the manual provided
with the Kensington security system or visit http.'//
www.kensingron.com. Connect the Kensington
security system cable between theTV and a table.
NOTE
The Kensington security system isoptionaI. You can
obtain additional accessories from your local dealer.
Securing the TV to a Wall (optional)
(Depending upon model)
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of theTV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and
the eye-bolts on the rear of theTV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope or cable. Make sure to keep
the rope parallel to the flat surface.
_ CAUTION
Make sure that children do not climb on or hang
on the TV.
NOTE
Use a platform or cabinet that is strong and large
enough to support theTV securely.
Brackets, bolts, and ropes are optional.You can
obtain additional accessories from your local
dealer.
Mounting on aWall
An optional wall mount can be used with your LG
Television. Consult with your local dealer for a wall
mount that supports theVESA standard used by
your TV model. Carefully attach the wall mount
bracket at the rear of the TV. Install the wall mount
bracket on a solid wall perpendicular to the floor. If
you are attaching theTV to other building materials,
please contact qualified personnel to install the wall
mount. Detailed instructions will be included with
the wall mount. We recommend that you use an LG
brand wall mount.When you do not use LG's wall
mount bracket, use a wall mount bracket where
the device is adequately secured to the wall with
enough space to allow connectivity to external
devices.
10 cm
4 inches)
Make sure to use screws and wall mounts that meet
the VESA standard. Standard dimensions for the wall
mount kits are described in the following table.

42LF5800I
100 I
LF61°°00x400
IWall mount bracket ILSW440B
!_(°pti°nal) [
_ CAUTION
* Disconnect the power before moving or
installing theTV. Otherwise electric shock may
OCCUr.
Remove the stand before installing the TV on a
wall mount by performing the stand attachment
in reverse.
If you install theTV on a ceiling or slanted wall,
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel.When using a
third-party wall mount, it is not covered by the
warranty.
Do not overtighten the screws as this may cause
damage to theTV and void your warranty.
Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
NOTE
. Use the screws that are listed on theVESA
standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The wall mount bracket is optional.You can
obtain additional accessories from your local
dealer.
The length of screws may differ depending upon
the wall mount. Make sure to use the proper
length.
For more information, refer to the manual
supplied with the wall mount.
When using the wall mounting bracket, apply
the adhesive protective label to cover the
unused stand opening(s).This will prevent the
accumulation of dust and dirt. (Use only when
provided with your particular model.)
ProvidedItem
Adhesive Protective Label
• When attaching a wall mounting bracket to the
TV, insert the wall mount inner spacers into the
TV wall mount holes to adjust the vertical angle
of the TV. (Use only when provided with your
particular model.)
ProvidedItem
WallMountSpacer
Connections (Notifications)
You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For
more information on external device's connection,
refer to the manual provided with each device.
NOTE
• If you record a TV program on a DVD recorder or
VCR, make sure to connect the TV signal input
cable to theTV through a DVD recorder or VCR.
For more information of recording, refer to the
manual provided with the connected device.
The external device connections may differ from
the model.
Connect external devices to theTV regardless of
the order of theTV port.
If you connect a gaming device to theTV, use the
cable supplied with the gaming device.
Refer to the external equipment's manual for
operating instructions.

• InPCmode,theremaybenoiseassociated
withtheresolution,verticalpattern,contrast,
orbrightness.Ifnoiseis present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the PICTURE menu until the picture
isclear.
• Depending upon the graphics card, some
resolution settings may not allow the image to
be positioned on the screen properly.
Connecting to an Antenna or Cable
Connect an antenna, cable, or cable boxto watch
TV.The RFcable may not be supplied, depending
upon the model.
_CAUTION
• Make sure not to bend the copper wire of the RF
cable.
C0pperwire
•Complete all connections between devices,
i and then connect the power cord to the power
outlet to prevent damage to your TV.
NOTE
•Use a signal splitter to use 2 TVs or more.
• DTV Audio Supported Codec: MPEG, Dolby
Digital.
Other Connections
Connect your TV to external devices. For the best
picture and audio quality, connect the external
device and theTV with the HDMI cable. Depending
upon the model, a cable may not be provided.
Remote Control
The descriptions in this manual are based on
the buttons on the remote control. Please read
this manual carefully and use the TV correctly. To
install batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the _r_ and _ ends
to the label inside the compartment, and close the
battery cover. Failure to match the correct polarities
of the battery may cause the battery to burst or
leak, resulting in fire, personal injury, or ambient
pollution. To remove the batteries, perform the
installation actions in reverse.This remote uses
infrared light.When in use, it should be pointed in
the direction oftheTV's remote sensor.
10
_ CAUTION
•Do not mix old and new batteries,
as this may damage the remote control.
A
(_ (POWER) Turns the TV on or off.
CAPTIONActivates or deactivates the subtitles.
C) AVMODESelects an AV mode.
1_0RATIO Resizes an image.
-(_INPUT Changes the input source.
Number button Enters numbers.
- (Dash) Inserts a dash between numbers such as
2-1 and 2-2.
LIST Accesses the saved channel list.
FLASHDKAlternates between the two last channels
selected (pressing repeatedly).
))))i))))))
B
_B
"_ VOL _ Adjusts the volume level.
FAV Accesses your favorite channel list.
INFOO Shows information on the current program.
MUTE_ Mutes all sounds.
A CI'I V Scrolls through the saved channels.
tPAGE _Moves to the previous or next screen.
SETTINGSAccesses the main menu.
SMART _ Accesses the Home menu.
mmm
mm,
•., IViYAPPSShows the hst of Apps.
Navigation buttons Scrolls through menus or
options. (up/down/left/right)
OK® Selects menus or options and confirms your
input.
-_ BACK Returns to the previous screen.

Q.MENUAccesses the quick menu.
EXiT Clears all on-screen displays and returns to TV
viewing.
External Control Device
Setup
To obtain the external control device setup
information, please visit www./g.com.
C
Color buttons (_ Red, _ Green, C-_:3Yellow, _ Blue)
These access special functions in some menus.
Control buttons (II, _, II, _I, I_) Controls the
SIMPLINK compatible devices (USB, SIMPLINK).
_m_LlnK Accesses the AV devices connected to the
TV; Opens the SIMPLINK menu.
SLEEPSets the length of time until theTV to turns off.
SAPI:_ Enables VD function. SAP (Secondary Audio
Program) Feature can also be enabled by pressing
the key.
TV Returns to the last TV channel.
Licenses
Supported licenses may differ by model. For more
information about licenses, visit www./g.com.
_ DOLBY
DIGITAL PLUS
Troubleshooting
• Cannot control the TV with the remote control.
- Check the remote control sensor on the
product and try again.
- Check if there is any obstacle between the
product and the remote control.
- Check if the batteries are still working and
properly installed (_ to _, _ to _)
• No image display and no sound is produced.
- Check if the product is turned on.
- Check if the power cord is connected to a wall
outlet.
- Check if there is a problem in the wall outlet by
connecting other products.
• TheTV turns off suddenly.
- Check the power control settings.The power
supply may be interrupted.
- Check if the Sleep Timer/Off Time is activated
in the TIME settings.
- If there is no signal while theTV is on, theTV
will turn off automatically after 15 minutes of
inactivity.
2.0+Digital Out HD
Open Source Software
Notice Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that iscontained in
this product, please visit http://opensource./ge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to [email protected]. This offer is valid for three
(3) years from the date on which you purchased the
product.
11

Specifications
Product specifications may be changed without
prior notice due to upgrade of product functions.
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV
1-135
External Antenna Impedance
75
Environment Condition
Operating Temperature 0 to 40 °C (32 °F to 104 °F)
Operating Humidity Less than 80 %
Storage Temperature -20 to 60 °C (-4 °F to 140 °F)
Storage Humidity Less than 85 %
Wireless Module
Wireless IVlodule {WN8122E1) Specification
Standard IEEE802.1 la/b/g/n
2400 to 2483.5 MHz
_r_quencyRa.ge 5150to5250M.z
5725 to 5850 MHz
802.11a : 16.5 dBm
Output power 802.11b : 16 dBm
(Max.) 802.11g : 15.5 dBm
802.11n - 2A GHz : 15.5 dBm
802.11 n - 5 GHz: 16.5 dBm
Contains FCC ID: BEJWN8122E1
Contains IC: 2703H-WN8122E1
Because band channel used by the country could
be different, the user can not change or adjust the
operating frequency and this product is set for the
regional frequency table.
This device should be installed and operated with
minimum distance 20 cm (7.8 inches) between
the device and your body. And this phrase isfor
the general statement for consideration of user
environment.
12

Cm
m
PROPER TELEViSiON PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer electronics industry are comn°_itted to
makin Shome entertainment safe and enjoyable
•As you enjoy your television, please note that alltelevisions new and old_ must be supported on
proper stands or installed accordins to the manufacturer's recon°'mendations Iblevisions that
are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc,
may fall over, resultin S in injury
TUNE IN TO SAFETY
•ALWAYS follow the manufacturer's recomn°!endations forthe safe installation of your television
•ALWAYS read and follow all instructions for proper use of your television
•NEVER allow children to climb on or play on the television or the furniture on which the television
is placed
• NEVER place the television on furniture that can easily be used as steps, such as a chest of
drawers
•ALWAYS install the television where it cannot be pushed, pulled over or knocked down
•ALWAYS route cords and cables connected to the television so that they cannot be tripped
over, pulled or srabbed
WALL OR CEILING MOUNT YOUR TELEVISION
.ALWAYS contact your retailer about professional installation if you have any doubts about your
ability to safely mount your television
• ALWAYS use a mount that has been recon°!mended by the television manufacturer and has a
safc, ty certification by an independent laboratory (such as UL, CSA, ETL)
• ALWAYS follow all instructions supplied by the television and mount manufacturers
• ALWAYS make sure that the wall or ceilin Swhere you are mountin Sthe television is appropriate
Some mounts are not desisned to be mounted to walls and ceilinss with steel studs or cinder
block construction If you are unsure, contact a professional installer
• televisions can be heavy A nsininsuns of two people is required for a wall or ceilin S mount
installation
MOVING AN OLDER TELEVISION TO A NEW PLACE IN
YOUR HOME
•Many new television buyers move their older CRr televisions into a secondary room after the
purchase of a fiat panel television Special care should be made in the placement of older CRT
televisions
• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size
and weisht
• NEVER place your older CRT television on a dresser where children may be tempted to use the
drawers to clin°!b
• ALWAYS make sure your older CAT television does not han S over the edse of your furniture
CE.org/safety

LC
Life's Good
Declaration of Conformity
Trade Name LG
Model 32LFS80B-UA, 32LF5800-UA
42LFSS00-UA, SOLF6100-UA
55LF6100-UA, 60LF6100-UA
Responsible LGElectronics Inc
Party
Address 1000 Sylvan Ave,
Englewood Cliffs NJ07632
U,S,A
TEL [phone]
The mode and sera numbers of theTV are ocated on the
back and one side of the TV,
Record them below should you ever need serv ce,
Forinquiresorcomments, vis_wwwo_go¢omorcaH;
1-800-243-0000 USA, Consumer User
1-888-865-3026 LJS_ CommercialUser
1-888-542-2623 CANADA
MODEL m_
SERIAL www._g.com

Life's Good
I
ENGUSH
Easy Setup Guide
Please read this manual carefuUy before operating your set and retain it for future reference.
ESPANOL
Gu|a R_pida de Configuraci6n
Lea atentamente este manual antes de poner en marcha eLequipo y cons_rve[o para futuras consuitas.
FRAN_AIS
Guide de configuration rapide
Avant d'utitiser ['apparei[, veuittez tire attentivement ce manuel et [e conserver pour pouvoir vous y reporter uLt_rieurement,
LED TV
32LF580B
32LF5800
42LF5800
50LF6100
55LF6100
60LF6100
_ [I[IAAA
(M4 x L14)
42LF5800
50/55/60LF61 O0
@x,,
(M4 x L20)
X232LF5800
42LF5800 32LF580B
b www.lg.com
J
P/No MFL68683622 (1501-REVO0)

ENGLISH Read Safety and Reference.
ESPANOL LeerSeguridad y Consu|tas,
FRAN_AIS Lisez S@curit@ et r@f@rences,
ENGLISH
ESPANOL
FRAN_AJS

ENGLISH
ESPAI_OL
FRAN_AIS
Image shown may differ from your TV.
La imagen puede ser diferente a la de su televisor.
Cette illustration peut ne pas correspondre a votre tel6viseur.
............................
!ii!i!iii_
[i[i[i_!!!_,_i_)i___'_i_il
iiiiiiiiiiiii !i !! ii ii ii iooo
[iiii:!¸¸ o_
!ii!ii!i!
_[[i!i_!!i:iiiii!iiill
I _ _ / _ (_/ iiiiiii [i_[i_[i_[i_[i_[i_[i_[i_[i_[i_[i_[i_[i_[
iiiiiii_ !ii_i_ii_i_i_i_i_i_i_i_i_i_ I
ooo]

Y P8 PR L R
®®®
L...._ VIDE0 ,........J LAUDIO,,,I

©
_O0¢
E_
EI30
[H3
i, _ ii
i, _ II