LG 24MB67PY User manual

www.lg.com
22MB67PY
24MB67PY
IPS LED(LED LCD) MONITOR MODEL
www.lg.com
Please read this manual carefully before operating
your set and retain it for future reference.
Owner's Manual
IPS LED MONITOR
LED LCD MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.

2
ENG
ENGLISH
TABLE OF CONTENTS
CONTENTS
3 ASSEMBLINGANDPREPAR-
ING
3 Unpacking
4 Partsandbuttons
5 Motionsensorlens
5 - Cautioninuse
5 - Noticeinhandlingandstorage
6 SettinguptheMonitorset
6 - AttachingtheStandBase
6 - Detachingthestandbase
7 - Detachingthestandbody
7 - Usingthecableholder
7 - Mountingonatable
8 - Adjustingtheangle
8 - Adjustingthestandheight
9 - UsingtheKensingtonlockingdevice
10 - Swivelstand
10 - UsingthePivotfunction
11 - Mountingonawall
12 USINGTHEMONITORSET
12 ConnectingtoaPC
12 - D-SUBconnection
12 - DVI-Dconnection
14 - Peripheraldeviceconnection
15 CUSTOMIZINGSETTINGS
16 CustomizingSettings
16 - MenuSettings
17 -Picture
18 -Color
19 -Display
19 -Audio
20 -MotionEnergySaver
21 -Others
22 -READERSetting
23 -SMARTENERGYSAVINGSetting
24 TROUBLESHOOTING
26 SPECIFICATIONS 
26 22MB67PY
27 24MB67PY
28 PresetModes(Resolution)
29 Indicator
30 PROPERPOSTURE
30 ProperpostureforusingtheMonitorset.

3
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLINGANDPREPARING
Unpacking
Checkyourproductboxforthefollowingitems.Ifthereareanymissingaccessories,contactthelocal
dealerwhereyoupurchasedyourproduct.Theillustrationsinthismanualmaydifferfromtheactualproduct
andaccessories.
 Donotuseanyunapprovedaccessoriestoensurethesafetyandproductlifespan.
 Anydamagesorinjuriesbyusingunapprovedaccessoriesarenotcoveredbythewarranty.
 Theaccessoriessuppliedwithyourproductmayvarydependingonthemodel.
 Productspecificationsorcontentsinthismanualmaybechangedwithoutpriornoticeduetoupgrade
ofproductfunctions.
CAUTION
NOTE
StandBase
CD(Owner'sManual)/
Card
D-SUBCable
(Thiscableisnotincludedinall
countries.)
(Dependingonthecountry) (Dependingonthecountry)
PowerCord
DVI-DCable
(Thiscableisnotincludedinall
countries.)
OneScrew CableHolder
USBCable
AudioCable

4
ENG
ENGLISH
ASSEMBLING AND PREPARING
Partsandbuttons
(PowerButton)
PowerIndicator
 LEDOn:Powerison
 LEDOff:Powerisoff
FrontSideButtons
Motionsensorlens
InputConnectors(Seep.12to14)Seep.12to14)to14)

5
ENG
ENGLISH
ASSEMBLING AND PREPARING
Motionsensorlens
Cautioninuse
Pleaseavoidusingthefresnellensinthefollowingconditionsbecauseitmaycausefailureor
malfunction.
(a)Insuchafluidaswater,alcoholetc.corrosivegas(SO2,Cl2,NOXetc.)orseabreeze.
(b)Inhighhumidity.
(c)Inaplaceexposeddirectlytosunlightorheadlightofautomobile.
(d)Inaplaceexposeddirectlytoblowfromair-conditionerorheater.
(e)Insuchaplacewhereinfraredrayisshaded.
(f)Inanyotherplacesimilartotheabove(a)through(e).
TheperformanceofMotionEnergySaverismaximizedtoaspecificuserdistance(1m)andangle(20
degrees).
Thesensormaynotdetectyouifyouaremotionless.
Ifyouthinkthatthemodeentrymessageappearstoofrequently,increasethetimesettingoftheMotion
EnergySaverorturnthemodeoff.
Avoidusingradioequipmentsuchasawalkie-talkieneartheproductasthismaycauseaproduct
malfunction.
Thesensormaynotdetectyou,whenthemonitorisusedinportraitmodedependingonaspecific
userangle.
Noticeinhandlingandstorage
1)Opticalfilterofsensorshouldnotbescratchedorsoiled.
2)Strongshockshouldbeavoided.
3)Hightemperature,highhumidity,fluidaswateroralcoholetc.,corrosivegas(SO2,Cl2,NOXetc.)and
seabreezeshouldbeavoided.

6
ENG
ENGLISH
ASSEMBLING AND PREPARING
SettinguptheMonitorset
AttachingtheStandBase
1 PlacetheMonitorsetwiththescreensidedown
onaflatandcushionedsurface.
StandBase
StandBody
StandBase
StandBody
 Toprotectthescreenfromscratches,cover
thesurfacewithasoftcloth.
3 Usingacoin,turnthescrewclockwisetosecure
thestandbase.
2 Checktheposition(atthefrontandrear)of
thestandbody,thenmountthestandbaseon
thestandbodyasshowninthefigure.
CAUTION
StandBase
 Thecomponentsappearingintheillustra-
tionsmaylookdifferentfromtheactualprod-
uct.
 Donotcarrythemonitorupside-downasthis
maycauseittofalloffitsstand,resultingin
damageorinjury.
 Toavoiddamagingthescreenwhenlifting
ormovingthemonitor,onlyholdthestandor
theplasticcover.Thisavoidsputtingunnec-
essarypressureonthescreen.
 Onlyremovethetapeandthelockingpin
whenthemonitorismountedonthestand
baseandisinanuprightposition.Otherwise,
thestandbodymayprotrude,whichmay
leadtoinjury.
Detachingthestandbase
1 Placethemonitor'sscreenfacedown.
Toprotectthescreenfromscratches,coverthe
surfacewithasoftcloth.
2 Usingacoin,turnthescrewinthestandbase
counterclockwise.Detachthestandbasefrom
thestandbody.
CAUTION

7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mountingonatable
1 Liftthemonitorandplaceitonthetableinan
uprightposition.
Installatleast10cmawayfromthewallto
ensuresufficientventilation.
10 cm
10 cm
10 cm
10 cm
Detachingthestandbody
1 Placethemonitor'sscreenfacedown.To
protectthescreenfromscratches,coverthe
surfacewithasoftcloth.
2 Usingascrewdriver,removethefourscrews
anddetachthestandfromthemonitor.
Usingthecableholder
FixtheKnob(Cableholder)tothe
Hole(Hingebody).
1
2
3
UseonescrewtofixtheCableHolderand
monitorset.
ClosetheCableholder.
2
3 Pressthe (Power)buttononthefrontofthe
monitortoturnonthemonitor.
 Unplugthepowercordpriortomovingor
installingthemonitor.Thereisriskofelectric
shock.
CAUTION
1
2
ConnectthePowercordtothemonitor,then
plugthepowercordintothewalloutlet.
(Beforeconnectpleasecheckthe“ON/OFF”
knobin“O”state).
Pressthe“ON/OFF”knobin“”state
(Openthepower).

 Theholesareusedforwallmountbracket.
 Variesdependinguponyourcountryor
model.
NOTE

8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Adjustingtheangle
1 Placethemonitormountedonthestandbase
inanuprightposition.
2 Adjusttheangleofthescreen.Theangleofthe
screencanbeadjustedupto5°forwardsand
20°backwardsforacomfortableviewingexpe-
rience.
 Toavoidinjurytothefingerswhenadjusting
thescreen,donotholdthelowerpartofthe
monitor'sframeasillustratedbelow.
 Becarefulnottotouchorpressthescreen
areawhenadjustingtheangleofthemonitor.
WARNING
FrontSideRearSide
22MB67PY
2 Adjusttheangleofthescreen.Theangleofthe
screencanbeadjustedupto5°forwardsand
35°backwardsforacomfortableviewingexpe-
rience.
FrontSideRearSide
24MB67PY
Adjustingthestandheight
1 Placethemonitormountedonthestandbase
inanuprightposition.
2 Removethetapeattachedatthebottomrearof
thestandbody,thenpulloutthelockingpin.
Tape
LockingPin
StandBody


9
ENG
ENGLISH
ASSEMBLING AND PREPARING
Using the Kensington locking
device
TheconnectorfortheKensingtonlockislocated
ontherearofthemonitor.
Formoreinformationoninstallationandusage,
refertotheKensingtonlockusermanualorvisit
thewebsiteathttp://www.kensington.com.
ConnectthemonitortothetablewiththeKensing-
tonlockcable.
 UsingtheKensingtonlockisoptional.The
accessoriescanbepurchasedatyourlocal
electronicsstore.
NOTE
 Oncethepinisremoved,itisnotnecessary
tore-insertittoadjusttheheight.
3 Theheightcanbeadjustedupto120mm.
 Donotputyourfingerbe-
tweenthescreenandthe
base(chassis)whenadjust-
ingthescreen'sheight.
CAUTION
WARNING
120.0mm
22MB67PY
3 Theheightcanbeadjustedupto130mm.
130.0mm
24MB67PY

10
ENG
ENGLISH
ASSEMBLING AND PREPARING
Swivelstand
 ImageshownmaydifferfromyourMonitor
set.
1 Swivel355degreesandadjusttheangleofthe
Monitorsettosuityourview.
1 Liftthemonitortoitshighestheighttoutilizethe
Pivotfunction.
UsingthePivotfunction
Thepivotfunctionallowsyoutorotatethescreen
90degreesclockwise.
2 Landscape&Portrait:Youcanrotatethepanel
90°clockwise.Pleasebecautiousandavoid
contactbetweenthemonitorheadandthe
StandBasewhenrotatingthescreentoaccess
thePivotfunction.Ifthemonitorheadtouches
theStandBase,thentheStandBasecould
crack.
Head
section
Stand
section
3 Becarefulwiththecableswhenrotatingthe
screen.

11
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mountingonawall
Forproperventilation,allowaclearanceof10cm
oneachsideandfromthewall.Detailed
instructionsareavailablefromyourdealer,seethe
optionalTiltWallMountingBracketInstallationand
SetupGuide.
IfyouintendtomounttheMonitorsettoawall,
attachWallmountinginterface(optionalparts)to
thebackoftheset.
WhenyouinstalltheMonitorsetusingawall
mountinginterface(optionalparts),attachit
carefullysoitwillnotdrop.
1Ifyouusescrewlongerthanstandard,the
monitormightbedamagedinternally.
2Ifyouuseimproperscrew,theproductmightbe
damagedanddropfrommountedposition.In
thiscase,LGElectronicsisnotresponsiblefor
it.
10 cm
10 cm
10 cm
10 cm
 UsethescrewsthatarelistedontheVESA
standardscrewspecifications.
 Thewallmountkitwillincludeaninstallation
manualandnecessaryparts.
 Thewallmountbracketisoptional.Youcan
obtainadditionalaccessoriesfromyourlocal
dealer.
 Thelengthofscrewsmaydifferdepending
onthewallmount.Besuretousetheproper
length.
 Formoreinformation,refertothe
instructionssuppliedwiththewallmount.
NOTE
 Disconnectthepowercordfirst,andthen
moveorinstalltheMonitorset.Otherwise
electricshockmayoccur.
 IfyouinstalltheMonitorsetonaceilingor
slantedwall,itmayfallandresultinsevere
injury.
 UseonlyanauthorizedLGwallmount
andcontactthelocaldealerorqualified
personnel.
 Donotovertightenthescrewsasthismay
causedamagetotheMonitorsetandvoid
yourwarranty.
 Useonlyscrewsandwallmountsthat
meettheVESAstandard.Anydamages
orinjuriesbymisuseorusinganimproper
accessoryarenotcoveredbythewarranty.
 Screwlengthfromoutersurfaceofback
covershouldbeunder8mm.
CAUTION
BackCover
WallmountPad
WallmountPad
BackCover
Standardscrew
Max.8mm
Model 22MB67PY 24MB67PY
WallMount
(AxB) 100x100 200x100
Standard
screw M4xL10
Numberof
screws 4
WallMount
Plate
(Optional)
RW120
 WallMount(AxB)
A
B

12
ENG
ENGLISH
USING THE MONITOR SET
USINGTHEMONITORSET
ConnectingtoaPC
 YourMonitorsetsupportsPlug&Play*.
*Plug&Play:APCrecognizesaconnected
devicethatusersconnecttoaPCandturn
on,withoutdeviceconfigurationoruser
intervention.
D-SUBconnection
TransmitsanalogvideofromyourPCtothe
Monitorset.ConnectthePCandtheMonitorset
withthesuppliedD-sub15pinsignalcableas
showninthefollowingillustrations.
 Macadapter
ForAppleMacintoshuse,aseparateplug
adapterisneededtochangethe15pin
highdensity(3row)D-SUBVGAconnector
onthesuppliedcabletoa15pin2row
connector.
 WhenusingaD-Subsignalinputcable
connectorforMacintosh
NOTE
DVI-Dconnection
TransmitsadigitalvideosignalfromyourPCto
theMonitorset.ConnectthePCandtheMonitor
setwithaDVIcableasshowninthefollowing
illustrations.

13
ENG
ENGLISH
USING THE MONITOR SET
 IfyouuseDP,itcancausecompatibility
problem.
 WhenyouwanttousetwoPCinourMonitor,
pleaseconnectthesignalcable(D-SUB/
DVI-D/DP)respectivelyinMonitorset.
 IfyouturntheMonitorsetonwhileitiscold,
thescreenmayflicker.Thisisnormal.
 Somered,green,orbluespotsmayappear
onthescreen.Thisisnormal.
NOTE
 Connectthesignal
inputcableandtighten
itbyturningthescrews
clockwise.
 Donotpressthescreen
withyourfingerforalongtimeasthismay
resultintemporarydistortiononthescreen.
 Avoiddisplayingafixedimageonthe
screenforalongperiodoftimetoprevent
imageburn.Useascreensaverifpossible.
CAUTION
 "SelfImageSetting"Function.
Thisfunctionprovidestheuserwithoptimal
displaysettings.Whentheuserconnects
themonitorforthefirsttime,thisfunction
automaticallyadjuststhedisplaytooptimal
settingsforindividualinputsignals.(Only
supportedinAnalogMode)
 ‘AUTO’Function.
Whenyouencounterproblemssuchas
blurryscreen,blurredletters,screenflicker
ortiltedscreenwhileusingthedeviceor
afterchangingscreenresolution,pressthe
AUTOfunctionbuttontoimproveresolution.
(OnlysupportedinAnalogMode)
NOTE
SelfImageSettingFunction
Pressthepowerbuttononthebottompanelto
turnthepoweron.Whenmonitorpoweristurned
on,the"SelfImageSetting"Functionisexecuted
automatically.(OnlysupportedinAnalogMode)

14
ENG
ENGLISH
USING THE MONITOR SET
 Peripheraldevicesaresoldseparately.
 TheUSBportsontheleftofthemonitorcan
beusedtoconnectthekeyboard,mouse,
andotherUSBdevices.
Peripheraldeviceconnection
Connectperipheraldevicestothemonitor.
NOTE
NOTE
 Headphonesorspeakersmaynotworknor-
mally,dependingontheserverPCsettings.
 Virtualsolutionsmayaffectthefunctionsor
speedofthespecificUSBstoragedevice.
NOTE
 Themonitor'sUSBterminalsupportsUSB
2.0andhighspeedcables.  

 DP=DisplayPort  
ThecableisSeparatepurchase.
TwoUSBDownstreamports
Connecttheseportstoamouse,
USBkeyboard,memorystickwith
currentspecunder100mA.
OneUSBUpstreamport
Connectthisporttothedown-
streamportofacomputer,laptop
orUSBmonitor(Yourcomputer
orUSBmonitormustsupport
USBandhaveUSBports).
(NotProvided)
(Not
Provided)

15
ENG
ENGLISH
CUSTOMIZING SETTINGS
CUSTOMIZINGSETTINGS
1 PressthedesiredbuttononthebottomoftheMonitorset.
2 ChangethevalueofthemenuitembypressingthebuttonsonthebottomoftheMonitorset.
Toreturntotheuppermenuorsetothermenuitems,usetheuparrow( )button.
3 SelectEXITtoleavetheOSDmenu.
MonitorsetButtons
Button Description
Accessesthemainmenus.(Seep.16)
OSDLocked/OSD
Unlocked
Thisfunctionallowyoutolockthecurrentcontrolsettings,so
thattheycannotbeinadvertentlychanged.
PressandholdtheMENUbuttonforseveralseconds.Then
OSDof“OSDLock”willappear.Afterthat,usercanselect
lockorunlockbypressingleft/rightbutton.
Ifuserselectsthe“Lock”iconbypressingthe“OK”button,
themessage“OSDLocked”willappear.Otherwise,“OSD
Unlocked”willappear.Afterselectingthe“Lock”,Ifyouwant
tochangetoUnlock,youcanpushthe“MENU”buttonfor
severalseconds.Themessage“OSDUnlocked”willappear.
UsethisbuttontoenterReaderModemenu.Itsfunctionworkstodisplayscreenas
paper-likepictureforEyecomfort.Ifyouwanttomoreinformation.(Seep.22)
UsethisbuttontoenterSMARTENERGYSAVINGmenu.(Seep.23)
Whenadjustingyourdisplaysettings,alwayspresstheAUTObuttonontheMONITOR
SETUPOSD.(OnlysupportedinAnalogMode)
Thebestdisplaymode 22MB67PY:1680x1050
24MB67PY:1920x1200
Youcanchoosetheinputsignal.
• Whentwoinputsignalsareconnected,youcanselecttheinputsignal(D-SUB/DVI-D/
DP)youwant.
• Whenonlyonesignalisconnected,itisautomaticallydetected.Thedefaultsettingis
D-SUB.
EXIT
ExittheOSD(OnScreenDisplay).
(PowerButton) Turnsthepoweronoroff.
PowerIndicator Thepowerindicatorstayswhiteifthedisplayisrunning
properly(OnMode).IfthedisplayisinSleepMode,thepower
indicatorblinkswhite.

16
ENG
ENGLISH
CUSTOMIZING SETTINGS
CustomizingSettings
MenuSettings
1 PressMENUbuttononthebottomoftheMonitorset
todisplaytheMenuOSD.
2 Settheoptionsbypressingthe◄or►or▼buttons.
3 Selectthe"NextMenu"buttontoenterthemore
optionsettings.
4 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
Eachoptionisexplainedbelow.
Menu Analog Digital DP Description
Volume ●● ● Toadjustthevolume
Brightness ●● ● Toadjustthebrightnessofthescreen
ResponseTime
(Onlyusefor
24MB67PY
Model)
● ● ●
Youcansetaresponsetimefordisplayedpicturesbasedonthespeed
ofthescreen.Foranormalenvironment,itisrecommendedthatyou
use'Off'.Forafast-movingpicture,itisrecommendedthatyouuse
'High'.
Wide/Original
●● ●
Wide
Switchtofullscreenmodeaccordingtoinputimagesignal.
Original
Changetheinputimagesignalratiotooriginal.
*ThisfunctionworksonlyifinputresolutionislowerthanMonitorset
ratio(16:9).
Reset ●● ● Restoreallfactorydefaultsettings.Pressthe◄,►buttonstoreset
immediately.

17
ENG
ENGLISH
CUSTOMIZING SETTINGS
Menu>NextMenu Analog Digital DP Description
Picture Contrast ● ● ● Toadjustthecontrastofthescreen
Sharpness ● ● ● Toadjusttheclearnessofthescreen
Color Gamma
● ● ● Tocustomizethecolorofthescreen
ColorTemp
SixColor(Onlyusefor
24MB67PYModel)
ColorReset(Onlyuse
for24MB67PYModel)
Display Horizontal ●Toadjustthepositionofthescreen
Vertical
Clock ●Toimprovetheclarityandstabilityofthescreen
Phase
Audio AudioInput ● Toselecttheaudioinput
Motion
Energy
Saver
Time
● ● ● Tosavingenergy,controlmonitorbysensinguser
absence.
Sensitivity
Savingmode
Others Language
● ● ● Tocustomizethescreenstatusforauser'soperating
environment
PowerIndicator
OffTimeSetting
Resolution ●
 Analog:D-SUB(Analogsignal)input.
 Digital:DVI-D(Digitalsignal)input.
 DP:DisplayPortinput.
Picture
1 PressMENUbuttononthebottomoftheMonitorset
todisplaytheMenuOSD.
2 Selectthe"NextMenu"buttontoenterthemore
optionsettings.
3 EntertoPicturebypressingthe▼button.
4 Settheoptionsbypressingthe◄or►or▼buttons.
5 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
Eachoptionisexplainedbelow.
Menu>NextMenu>Picture Description
Contrast Toadjustthecontrastofthescreen.
Sharpness Toadjusttheclearnessofthescreen.

18
ENG
ENGLISH
CUSTOMIZING SETTINGS
Color
1 PressMENUbuttononthebottomoftheMonitorset
todisplaytheMenuOSD.
2 Selectthe"NextMenu"buttontoenterthemore
optionsettings.
3 SelectColorbypressingthe►button.
4 EntertoColorbypressingthe▼button.
5 Settheoptionsbypressingthe◄or►or▼buttons.
6 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
Eachoptionisexplainedbelow.
Menu>NextMenu>Color Description
Gamma Setyourowngammavalue.:Gamma0,Gamma1,Gamma2,Offon
themonitor,highgammavaluesdisplaywhitishimagesandlowgamma
valuesdisplayblackishimages.
Ifuserdon'twantadjustedgamma,usercanselectGammaoff.
ColorTemp Custom
•Red:Setyourownredcolorlevels.
•Green:Setyourowngreencolorlevels.
•Blue:Setyourownbluecolorlevels.
Selectthescreencolor.
Warm:Setthescreentowarmcolortemperature(morered).
Medium:Setthescreentomediumcolortemperature.
Cool:Setthescreentocoolcolortemperature(moreblue).
SixColor
(Onlyusefor24MB67PYModel)
Setsandstoresthehueandsaturationforsixcolors(Red/Green/Blue/Cyan/
Magenta/Yellow)tosatisfythecolorrequirementsofauser.
Hue Adjuststhescreenhue.
Saturation Adjuststhecolorsharpnessonthescreen.Lowervaluesmake
thecolorsharpnessweakerandcolorslighterwhilehigher
valuesmakethecolorsharpnessstrongerandcolorsdark.
ColorReset
(Onlyusefor24MB67PYModel)
Resetsthecolorsettingstothefactorydefaultsettingsforthecurrentinput
device.

19
ENG
ENGLISH
CUSTOMIZING SETTINGS
Display
1 PressMENUbuttononthebottomoftheMonitorset
todisplaytheMenuOSD.
2 Selectthe"NextMenu"buttontoenterthemore
optionsettings.
3 SelectDisplaybypressingthe►button.
4 EntertoDisplaybypressingthe▼button.
5 Settheoptionsbypressingthe◄or►or▼buttons.
6 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
Eachoptionisexplainedbelow.
Menu>NextMenu>Display Description
Horizontal Tomoveimageleftandright.
Vertical Tomoveimageupanddown.
Clock Tominimizeanyverticalbarsorstripesvisibleonthescreenbackground.The
horizontalscreensizewillalsochange.
Phase Toadjustthefocusofthedisplay.Thisitemallowsyoutoremoveanyhorizontal
noiseandclearorsharpentheimageofcharacters.
Audio
1 PressMENUbuttononthebottomoftheMonitorset
todisplaytheMenuOSD.
2 Selectthe"NextMenu"buttontoenterthemore
optionsettings.
3 SelectAudiobypressingthe►button.
4 EntertoAudiobypressingthe▼button.
5 Settheoptionsbypressingthe◄or►buttons.
6 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
Eachoptionisexplainedbelow.
Menu>NextMenu>Audio Description
AudioInput ToSelecttheaudiosourcetooutputtospeaker/headphonefrombelowitems.
1.Audio-In:Theaudiosourceonexternalanalogaudiojack.
(OnlyinDsub/DVI-Dinput)
2.DP:TheaudiosourceonDPport(OnlyinDPinput).
3.Auto:TheaudiosourceisswitchedautomaticallybetweenDPorAudio-In.
DPhashigherpriority.(OnlyinDPinput)

20
ENG
ENGLISH
CUSTOMIZING SETTINGS
Eachoptionisexplainedbelow.
Menu>NextMenu>Motion
EnergySaver
Description
Time Themonitorsetwillswitchtopoweroffordecreaseofbacklightafterthetimeof
absencetobechosenbyuser.(off,5/10/30min).
Sensitivity Selectthesensitivityofmotionsensor.
Savingmode Selectthebehaviorofmonitorwhenmonitordetecttheabsenceofuser.
1.Power:themonitorwillswitchtopoweroffmodeafterthetimetobechosen
byuser.
2.Backlight:themonitorwillturnoffbacklightafterthetimetobechosenby
user.
MotionEnergySaver
1 PressMENUbuttononthebottomoftheMonitorsetto
displaytheMenuOSD.
2Selectthe"NextMenu"buttontoenterthemoreoption
settings.
3 SelectMotionEnergySaverbypressingthe►button.
4 EntertoMotionEnergySaverbypressingthe▼button.
5 Settheoptionsbypressingthe◄or►buttons.
6 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,use
theuparrow( )button.
NOTE
Accordingtoexternalcondition,thesensitivityofsensorwillbechanged.