Lg 24mp750c User manual

* LG LED Monitor applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and

retain it for future reference.

24BP750C/24BP75CP

24MP750C

OWNER’S MANUAL

LED LCD MONITOR

(LED Monitor*)

www.lg.com

ENGLISH

LICENSE

Each model has different licenses.Visit www.lg.com for more information on the license.

The terms HDMI, HDMI High-Definition Multimedia Interface, and

the HDMI Logo are trademarks or registered trademarks of HDMI

Licensing Administrator, Inc.

The SuperSpeed USB Trident logo is a registered trademark of USB

Implementers Forum, Inc.

VESA, VESA logo, DisplayPort compliance logo and DisplayPort

compliance logo for dual-mode source devices are all registered

trademarks of the Video Electronics Standards Association.

MaxxAudio and additional MAXX trademarks are trademarks and/

or registered trademarks of Waves Audio Ltd.

TabLE of CoNTENTS

LICENSE ...................................................... 2

ASSEMBLING AND PREPARING .................. 3

USING THE MONITOR................................ 12

USER SETTINGS ........................................ 15

TROUBLESHOOTING ................................. 25

PRODUCT SPECIFICATION......................... 27

ENGLISH

ASSEMBLING AND PREPARING

CAUTION

•Always use genuine LG components to ensure safety and product performance.

•The product warranty will not cover damage or injury caused by the use of unauthorized components.

•It is recommended that use the supplied components.

•If you use generic cables not certified by LG, the screen may not display or there may be image noises.

•Illustrations in this document represent typical procedures, so they may look different from the actual product.

•Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing

so may damage the product.)

•Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this

way will not be covered by the product warranty.

•Do not carry the monitor upside down by just holding the base.This may cause the monitor to fall off the stand

and could result in personal injury.

•When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen

may cause damage to it.

NOTE

•The components may look different from those illustrated here.

•Without prior notice, all product information and specifications contained in this manual are subject to change

to improve the performance of the product.

•To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer

from which you purchased the product.

•The power cord provided may differ depending upon the region.

Supported Drivers and Software

You can download and install the latest version from the LGE website (www.lg.com).

Drivers and Software Installation Priority

Monitor Driver Recommended

OnScreen Control Recommended

ENGLISH

Product and Button Description

3 4

Front Adjust Button Functions Information

1Webcam activity status indicator 3Power Button

2Webcam 4Power Indicator

Power Indicator

Mode LED Color

Monitor On White

Monitor Sleep Blinking

Monitor Off Off

Webcam activity status indicator

Mode LED Color

Webcam enabled Green

Webcam disabled Off

ENGLISH

Button Description

(Menu) If the menu is inactive Activates the main menu.

If the menu is active Exits the OSD menu when the button is pressed.

If the menu is inactive Adjusts the volume level of the monitor.

If the menu is active Left directional key.

If the menu is inactive Adjusts the volume level of the monitor.

If the menu is active Right directional key.

If the menu is inactive Change the input signals.

If the menu is active Selects and confirms menus or options.

Down directional key.

Up directional key.

(Power button) Turn the monitor power on/off.

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or

damaged and to ensure safe transportation, regardless of its shape or size.

•Place the monitor in the original box or packing material before attempting to move it.

•Before moving or lifting the monitor, disconnect the power cord and all other cables.

•Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.

•When holding the monitor, the screen should face away from you to prevent it from being scratched.

•When transporting the monitor, do not expose the monitor to shock or excessive vibration.

•When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.

CAUTION

•Avoid touching the monitor screen as much as possible.

-This may result in damage to the screen or some of the pixels used to create images.

•If you use the monitor panel without the stand base, its button may cause the monitor to become unstable and

fall, resulting in damage to the monitor or human injury. In addition, this may cause the button to malfunction.

ENGLISH

Adjusting the Stand Height

1 Handle the monitor with both hands for safety.

2 The height can be adjusted up to 130.0 mm.

WARNING

•Do not put your fingers or hand between the screen and the base (chassis) when adjusting the screen's height.

Installing on a Table

•Lift the monitor and place it on the table in an upright position. Place the monitor at least 100mm away from

the wall to ensure sufficient ventilation.

100 mm

CAUTION

•Unplug the power cord before moving or installing the monitor. There is risk of electric shock.

•Make sure to use the power cord that is provided in the product package and connect it to a grounded power

outlet.

•If you need another power cord, please contact your local dealer or the nearest retail store.

130.0 mm

ENGLISH

Adjusting the Angle

1 Place the monitor mounted on the stand base in an upright position.

2 Adjust the angle of the screen.

The angle of the screen can be adjusted forward or backward from -5° to 35° for a comfortable viewing

experience.

35 °-5°

WARNING

•To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as

illustrated below.

•Be careful not to touch or press the screen area when adjusting the angle of the monitor.

Pivot Feature

The pivot feature allows the monitor to rotate 90° clockwise and -90° counter clockwise.

1 Raise the monitor to the maximum height.

2 Adjust the angle of the monitor in the direction of the arrow as shown in the figure.

Rear Side Front Side

ENGLISH

3 Rotate the monitor 90° clockwise and -90° counter clockwise as shown in the figure.

4 Complete the installation by rotating the monitor 90° clockwise and -90° counter clockwise as shown below.

NOTE

•Auto Pivot feature of the display is not supported.

•The screen can be rotated easily using the screenpivot shortcut key provided with your Windows operating

system. Note that someWindows versions and some graphics card drivers may use different settings for the

screen pivot key or may not support the pivot key at all.

•Windows screen pivot shortcut keys

-0°: Ctrl + Alt + Up arrow key (↑)

-90°: Ctrl + Alt + Left arrow key (←)

-180°: Ctrl + Alt + Down arrow key (↓)

-270°: Ctrl + Alt + Right arrow key (→)

WARNING

•To avoid scratching the stand base, make sure that when rotating the monitor using the pivot feature, the stand

does not make contact with the monitor.

Head

Stand

ENGLISH

WARNING

•Take care when rotating the monitor if the cable is connected.

•To avoid injury when rotating the display, do not place your fingers between the display and the stand base.

Using the Kensington Lock

The connector for the Kensington security system is located at the back of the monitor.

For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website

at http://www.kensington.com.

Connect the monitor to a table using the Kensington security system cable.

NOTE

•The Kensington security system is optional. You can obtain optional accessories from most electronics stores.

ENGLISH

Installing the Wall Mount Plate

This monitor meets the specifications for the wall mount plate or other compatible devices.

NOTE

•The wall mount plate is sold separately.

•For more information on installation, refer to the wall mount plate’s installation guide.

•Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the

screen.

•Remove the stand before installing the monitor on a wall mount by performing the stand attachment in

reverse.

Installing on the Wall

Install the monitor at least 100mm away from the wall and leave about 100mm of space at each side of the

monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail

store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.

100 mm

100 mm 100 mm

To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.

Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.

Wall Mount (mm) 100 x 100

Standard screw M4 x L10

Number of screws 4

Wall Mount Plate (Optional) LSW 149

NOTE

•A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable

for any accidents relating to the use of non-standard screws.

•The wall mount kit includes the installation guide and all necessary parts.

•The wall mounting bracket is optional.You can obtain optional accessories from your local dealer.

•The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard

length, it may damage the inside of the product.

•For more information, please refer to the user manual for the wall mounting bracket.

ENGLISH

CAUTION

•Unplug the power cord before moving or installing the monitor to avoid electric shock.

•Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead

to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.

•Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this

way will not be covered by the product warranty.

•Use the wall mounting bracket and screws that conform toVESA standards. Damage caused by the use or

misuse of inappropriate components will not be covered by the product warranty.

•When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.

Wall Mount Plate

Back of the Monitor

Standard screw:

M4 x L10

Wall Mount Plate

Back of the Monitor

Max. 8 mm

ENGLISH

USING THE MONITOR

•Illustrations in this manual may differ from actual product.

Press the tact key button, go to Settings Input, and then select the input option.

CAUTION

•Do not press the screen for a prolonged time. This may cause image distortion.

•Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC

screensaver if possible.

•When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power

outlet.

•The monitor may flicker when turned on in an area where the temperature is low.This is normal.

•Sometimes red, green, or blue spots may appear on the screen.This is normal.

Connecting to a PC

•This monitor supports the *Plug and Play feature.

* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure

anything or install any manual drivers.

HDMI Connection

Transmits digital video and audio signals from your PC to the monitor.

CAUTION

•Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.

•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not

display or a connection error may occur.

•Recommended HDMI cable types

-High-Speed HDMI®/TM cable

-High-Speed HDMI®/TM cable with Ethernet

DisplayPort Connection

Transmits digital video and audio signals from your PC to the monitor.

NOTE

•There may be no video or audio output depending on the DP (DisplayPort) version of the PC.

•If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini DisplayPort to DisplayPort)

cable or gender that supports DisplayPort 1.4. (Sold separately)

USB-C connection

Transmits digital video and audio signals and USB data from your PC to the monitor. Press the menu button and

then select the input option from the input menu.

NOTE

•PD(Power Delivery) and DP Alternate Mode(DP over USB-C) are supported via USB-C Port.

•Features may not work properly depending on the connected device’s specifications and the environment.

•USB-C port is not for the Monitor Power source but for a PC power source.

Connect Adapter to supply power to the Monitor

ENGLISH

Connecting LAN

LAN connection

Connect the router or switch to the monitor.

NOTE

•The LAN cable is sold separately.

•The following LAN cable type can be used: Standard: IEEE 802.3 ETHERNET

•Connect the LAN cable and the peripheral devices to use the monitor.

-In order to use Ethernet in the PC, the USB-C cable must be connected to the PC.

•The monitor and PC must be connected with a USB-C cable to use wired LAN.

Connecting AV Devices

HDMI Connection

HDMI transmits digital video and audio signals from your AV device to the monitor.

NOTE

•Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.

•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not

display or a connection error may occur.

•Recommended HDMI cable types

-High-Speed HDMI®/TM cable

-High-Speed HDMI®/TM cable with Ethernet

USB Device connection

The USB port on the product functions as a USB hub.

NOTE

•It is recommended you install all Windows Updates to keep your Windows up-to-date before connecting to the

product for use.

•Peripheral devices are sold separately.

•A keyboard, mouse, or USB device can be connected to the USB port.

•The charging speed may vary depending on the device.

•To use USB Downstream port of monitor, user must connect Upstream port of monitor to Host PC using USB C-C

or USB C-A cable.

•When the USB C-C cable is connected between Upstream port of monitor and Host PC, the Downstream port of

monitor support USB 2.0 device.

•When the USB C-A cable is connected between Upstream port of monitor and Host PC, the Downstream port of

monitor support USB 3.0 device.

However, Host PC must support USB 3.0 function.

ENGLISH

CAUTION

CautionsWhen Using a USB Device

•A USB device with an automatic recognition program installed, or that uses its own driver, may not be

recognized.

•Some USB devices may not be supported or may not work properly.

•It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supply is not

adequate, the USB device may not be recognized properly.)

Connecting Peripherals

Headphones Connection

Connect peripherals to the monitor via the headphones port.

NOTE

•Peripheral devices are sold separately.

•Depending on the audio settings of the PC and external device, headphones and speaker functions may be

limited.

•If you use angled earphones, it may cause a problem with connecting another external device to the monitor.

Therefore, it is recommended to use straight earphones.

Angled Straight

(Recommend)

•Headphone Port (4-pole ear microphone port)

-The 4-pole ear microphone port supports US 4-pole standards, but not the European 4-pole ear microphone.

-When using ear microphone (or Bluetooth® headset), audio input and output are directed to the connected

device and the microphone and speaker on PC do not work.

-The 4-pole ear microphone port does not support external microphone.

-The USB-C cable must be connected to the PC to use the headphone's microphone.

-The monitor and PC must be connected with a USB-C cable to use the headphone's microphone.

-The 4-pole headphones support the US 4-pole standard.

-The European 4-pole standard is not supported.

-The volume buttons included in the 4-pole headphones do not work.

-The 4-pole headphone jack does not support an external microphone.

-You can select and use one of the WebCAM Microphone and headphone's Microphone through the PC

settings when connecting a 4-pole headphone.

WebCAM Connection

You can use the WebCAM by connecting the USB-C port to a PC.

NOTE

-You need to pull up by the WebCAM module at the top of the back of the product to useWebCAM.

-You can select and use WebCAM's microphone and headphone's microphone on the PC when connecting a

headphone microphone.

ENGLISH

USER SETTINGS

NOTE

•Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.

Activating the Main Menu

Monitor buttons

Menu Settings

1 To view the OSD menu, press the button and then enter the Settings.

2 Use the to adjust the options.

3 To return to the upper menu or set other menu items, press the or / it.

4 If you want to exit the OSD menu, press the button.

Quick Settings Input Picture Sound General

ENGLISH

Quick Settings

Settings > Quick Settings Description

Brightness

Adjusts the contrast and brightness of the screen.

Contrast

Volume

Adjusts the volume.

NOTE

•You can adjust Mute / Unmute by pressing the button in the Volume menu.

Color Temp

Custom The user can adjust it to red, green, or blue by customization.

Warm Sets the screen color to a reddish tone.

Medium Sets the screen color between a red and blue tone.

Cool Sets the screen color to a bluish tone.

Manual The user can fine-tune the color temperature.

Waves MaxxAudio® On MaxxAudio® by waves, recipient of a Technical GRAMMY Award® is a suite of studio-quality sound tools for a superior listening experience.

Off Disables the MaxxAudio function.

ENGLISH

Input

Settings > Input Description

Input List Selects the input mode.

Aspect Ratio

Adjusts the aspect ratio of the screen.

Full Wide Displays the video in widescreen, regardless of the video signal input.

Original Displays video according to the aspect ratio of the video signal input.

NOTE

•The display may look the same for Full Wide and Original options at the recommended resolution. (1920 x 1080)

ENGLISH

Picture

Settings > Picture Description

Picture Mode

Custom Allows the user to adjust each element.

Vivid Heightens contrast, brightness and sharpness to display vivid images.

Reader Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.

Cinema Optimizes the screen for video.

FPS This mode is optimized for FPS games.

RTS This mode is optimized for RTS Game.

Color Weakness This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish between the two colors.

ENGLISH

Settings > Picture Description

Picture Adjust

Brightness Adjusts the contrast and brightness of the screen.

Contrast

Sharpness Adjusts the sharpness of the screen.

SUPER RESOLUTION+

High Optimizes the screen for crystal clear images. Best for high-definition video or games.

Middle Optimizes the screen for comfortable viewing, with images at the middle level between the low and high modes. Best for UCC or SD videos.

Low Optimizes the screen for smooth and natural images. Best for still images or images with less movement.

Off Displays in the most common setting. Disables SUPER RESOLUTION+.

NOTE

•Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for normal text or for desktop icons.

Doing so may result in unnecessarily high sharpness.

Black Level

Sets the offset level (for HDMI only).

•Offset: as a reference for a video signal, this is the darkest color the monitor can display.

High Keeps the current contrast ratio of the screen.

Low Lowers the black levels and raises the white levels from the current contrast ratio of the screen.

DFC On Adjusts the brightness automatically according to the screen.

Off Disables the DFC feature.

ENGLISH

Settings > Picture Description

Game Adjust

Response Time

Sets a response time for displayed pictures based on the movement of the picture on the screen.

For a normal environment, it is recommended that you use Fast.When there is a lot of motion, it is recommended that you use Faster.

Setting to Faster may cause image sticking.

Faster Sets the response time to Faster.

Fast Sets the response time to Fast.

Normal Sets the response time to Normal.

Off Does not use the response time improvement feature.

Black Stabilizer

You can control the black contrast to have better visibility in dark scenes.

Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark game screens.)

Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.

Cross Hair Cross hair provides a mark on the center of the screen for First Person Shooter (FPS) games. Users can select the cross hair that fits their gaming environment among

four different cross hairs.

This manual suits for next models

Table of contents