LG D2342P User manual

www.lg.com
OWNER’S MANUAL
CINEMA 3D MONITOR
D2342P
Please read this manual carefully before operating
your set and retain it for future reference.
CINEMA 3D MONITOR MODEL
ENGLISH
ENG.indd 1 2011-04-05 �� 1:20:32

2
ENG
ENGLISH
TABLE OF CONTENTS
Stand Base
Stand Body
CONTENTS
3 ASSEMBLING AND PREPARING
3 Unpacking
4 Partsandbuttons
6 SettinguptheMonitorset
6 - AttachingtheStandBase
6 - DetachingtheStandBaseandBody
7 - Mountingonatable
8 - Mountingonawall
10 USING THE MONITOR SET
10 ConnectingtoaPC
10 - D-SUBconnection
10 - DVI-Dconnection
10 - HDMIconnection
12 CUSTOMIZING SETTINGS
12 AccessingTheMainMenus
13 CustomizingSettings
13 - MenuSettings
14 - 3DSettings(Only3Dmode)
14 - VolumeSettings(Onlysupportedin
HDMI)
15 - SUPERENERGYSAVINGSettings
16 TROUBLESHOOTING
18 TROUBLESHOOTING WHEN
USING 3D MODE
19 SPECIFICATIONS
20 PresetModes(Resolution)
20 HDMI3DTIMING
20 Indicator
21 PRECAUTIONS TO TAKE
WHEN VIEWING 3D IMAGES
22 PROPER POSTURE
22 ProperpostureforusingtheMonitorset.
22 Precautionstotakewhenviewing3Dim-
ages
ENG.indd 2 2011-04-05 �� 1:20:32

3
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Checkyourproductboxforthefollowingitems.Ifthereareanymissingaccessories,contactthelocal
dealerwhereyoupurchasedyourproduct.Theillustrationsinthismanualmaydifferfromtheactualproduct
andaccessories.
Donotuseanyunapprovedaccessoriestoensurethesafetyandproductlifespan.
Anydamagesorinjuriesbyusingunapprovedaccessoriesarenotcoveredbythewarranty.
Theaccessoriessuppliedwithyourproductmayvarydependingonthemodel.
Productspecificationsorcontentsinthismanualmaybechangedwithoutpriornoticeduetoupgrade
ofproductfunctions.
Usershoulduseshieldedsignalinterfacecables(RGB cable/DVI-Dcable)withferritecoresto
maintainstandardcompliancefortheproduct.
CAUTION
NOTE
Stand Base
Stand Body
Power Cord
CD(Owner's Manual) /
Card
TriDef 3D software Program CD /
Quick Installation Guide
D-SUB Cable
(Thissignalcablemaybeattached
tothisproductbeforeshippingout.)
DVI-D Cable
(Thiscableisnotincludedinall
countries.)
3D Glasses
(Normaltype)
3D Glasses
(Clip-ontype)
ENG.indd 3 2011-04-05 �� 1:20:34

5
ENG
ENGLISH
ASSEMBLING AND PREPARING
Power Indicator
Lighting On: Turned on
Lighting Off: Turned off
Button(Seep.12)
Button Description
MENU Accessesthemainmenus.(Seep.13)
OSD LOCKED/
UNLOCKED
Thisfunctionallowsyoutolockthecurrentcontrolsettings,so
thattheycannotbeinadvertentlychanged.
PressandholdtheMENUbuttonforseveralseconds.
Themessage"OSDLOCKED"shouldappear.
YoucanunlocktheOSDcontrolsatanytimebypushing
theMENUbuttonforseveralseconds.Themessage"OSD
UNLOCKED"shouldappear.
SUPER ENERGY
SAVING Button
UsethisbuttontoenterSUPERENERGYSAVINGmenu.For
moreinformation.(Seep.15)
3D 3Ddisplaysettings.(Seep.14)
AUTO Whenadjustingyourdisplaysettings,alwayspresstheAUTObuttonontheMONITOR
SETUPOSD.(OnlysupportedinAnalogMode)
The best display mode 1920x1080
VOLUME(OnlyHDMImode) AdjustthevolumeoftheMonitorset.(Seep.14)
INPUT Youcanchoosetheinputsignal.
Whentwoinputsignalsareatleastareconnected,youcanselecttheinputsignal
(D-SUB/DVI/HDMI)youwant.
Whenonlyonesignalisconnected,itisautomaticallydetected.Thedefaultsettingis
D-SUB.
EXIT ExittheOSD(OnScreenDisplay).
(PowerButton) Turnsthepoweronoroff.
Power Indicator Thepowerindicatorstaysblueifthedisplayisrunning
properly(OnMode).IfthedisplayisinSleepMode,thepower
indicatorblinksblue.
ENG.indd 5 2011-04-05 �� 1:20:34

6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Setting up the Monitor set
Attaching the Stand Base
1 PlacetheMonitorsetwiththescreenside
downonaflatandcushionedsurface.
Layafoammatorsoftprotectivecloth
onthesurfacetoprotectthescreenfrom
damage.
Thisillustrationdepictsthegeneralmodelof
connection.Yourmonitormaydifferfromthe
itemsshowninthepicture.
Donotcarrytheproductupsidedownholding
onlythestandbase.Theproductmayfall
andgetdamagedorinjureyourfoot.
CAUTION
CAUTION
Detaching the Stand Base and Body
1 PlacetheMonitorsetwiththescreenside
downonaflatandcushionedsurface.
2 PullouttheStand BaseandStand Body from
theMonitorset.
3 AttachtheStand Baseandthentightenthe
screwtotherightwithaCoin.
2 AssembletheStand Bodyintotheproductin
thecorrectdirectionasshowninthepicture.
Makesureyoupushituntilyouhearit“click”.
3 TurnthescrewtotheleftwithaCoin,andthen
pullouttheStand BasefromtheStand Body.
Stand Body
Stand Base
Hinge Body
ENG.indd 6 2011-04-05 �� 1:20:35

7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a table
1 LiftandtilttheMonitorsetintoitsupright
positiononatable.
Leavea10cm(minimum)spacefromthewall
forproperventilation.
2 ConnectthePower Cordtoawalloutlet.
3 Press (Power)buttononthefrontswitch
paneltoturnthepoweron.
10 cm
10 cm
10 cm
10 cm
Whenyouadjusttheangle,donotholdthe
bottomoftheMonitorsetframeasshownon
thefollowingillustration,asmayinjureyour
fingers.
Donottouchorpressthescreenwhen
adjustingtheangleofthemonitor.
WARNING
Unplugthepowercordbeforemovingthe
Monitortoanotherlocation.Otherwiseelectric
shockmayoccur.
Tiltfrom+15to-5degreesupordowntoadjust
theangleoftheMonitorsettosuityourview.
CAUTION
NOTE
Front Rear
15- 5
ENG.indd 7 2011-04-05 �� 1:20:36

8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a wall
Forproperventilation,allowaclearanceof10cm
oneachsideandfromthewall.Detailed
instructionsareavailablefromyourdealer,seethe
optionalTiltWallMountingBracketInstallationand
SetupGuide.
WhenyouinstalltheMonitorsetusingawall
mountinginterface(optionalparts),attachit
carefullysoitwillnotdrop.
PleaseuseVESAstandardasbelow.
784.8mm(30.9inch)andunder
*WallMountPadThickness:2.6mm
*Screw:Φ4.0mmxPitch0.7mmx
Length10mm
787.4mm(31.0inch)andabove
*PleaseuseVESAstandardwallmountpad
andscrews.
10 cm
10 cm
10 cm
10 cm
UsingtheKensingtonsecuritysystem
TheKensingtonsecuritysystemconnectoris
locatedatthebackoftheMonitorset.Formore
informationofinstallationandusing,refertothe
manualsuppliedwiththeKensingtonsecurity
systemorvisit
http://www.kensington.com
.
ConnecttheKensingtonsecuritysystemcable
betweentheMonitorsetandatable.
TheKensingtonsecuritysystemisoptional.
Youcanobtainitfrommostelectronicsstores.
NOTE
ENG.indd 8 2011-04-05 �� 1:20:37

9
ENG
ENGLISH
ASSEMBLING AND PREPARING
Disconnectthepowercordfirst,andthen
moveorinstalltheMonitorset.Otherwise
electricshockmayoccur.
IfyouinstalltheMonitorsetonaceilingor
slantedwall,itmayfallandresultinsevere
injury.
UseonlyanauthorizedLGwallmount
andcontactthelocaldealerorqualified
personnel.
Donotovertightenthescrewsasthismay
causedamagetotheMonitorsetandvoid
yourwarranty.
Useonlyscrewsandwallmountsthat
meettheVESAstandard.Anydamages
orinjuriesbymisuseorusinganimproper
accessoryarenotcoveredbythewarranty.
UsethescrewsthatarelistedontheVESA
standardscrewspecifications.
Thewallmountkitwillincludeaninstallation
manualandnecessaryparts.
Thewallmountbracketisoptional.Youcan
obtainadditionalaccessoriesfromyourlocal
dealer.
Thelengthofscrewsmaydifferdepending
onthewallmount.Besuretousetheproper
length.
Formoreinformation,refertothe
instructionssuppliedwiththewallmount.
CAUTION
NOTE
Model D2342P
VESA (A x B) 75x75
Standard screw M4
Number of screws 4
Wall mount bracket
(optional)
RW120
ENG.indd 9 2011-04-05 �� 1:20:37

10
ENG
ENGLISH
USING THE MONITOR SET
USING THE MONITOR SET
Connecting to a PC
YourMonitorsetsupportsPlug&Play*.
*Plug&Play:APCrecognizesaconnected
devicethatusersconnecttoaPCandturn
on,withoutdeviceconfigurationoruser
intervention.
D-SUB connection
TransmitsanalogvideofromyourPCtothe
Monitorset.ConnectthePCandtheMonitorset
withthesuppliedD-sub15pinsignalcableas
showninthefollowingillustrations.
Mac adapter
ForAppleMacintoshuse,aseparateplug
adapterisneededtochangethe15pin
highdensity(3row)D-SUBVGAconnector
onthesuppliedcabletoa15pin2row
connector.
WhenusingaD-Subsignalinputcable
connectorforMacintosh
IfyouuseHDMIPC,itcancausecompatibility
problem.
NOTE
NOTE
H
D
MI
D-SUB
DVI
-D
RGB OUT
H
D
MI
D
-
S
U
B
DVI OUT
DVI-D
HDMI
D
-
S
U
B
HDMI OUT
DVI
-D
HDMI OUT
DVI-D connection
TransmitsadigitalvideosignalfromyourPCto
theMonitorset.ConnectthePCandtheMonitor
setwithaDVIcableasshowninthefollowing
illustrations.
HDMI connection
Transmitsthedigitalvideoandaudiosignalsfrom
yourPCorA/VtotheMonitorset.ConnectthePC
orA/VandtheMonitorsetwiththeHDMIcableas
showninthefollowingillustrations.
ENG.indd 10 2011-04-05 �� 1:20:38

11
ENG
ENGLISH
USING THE MONITOR SET
WhenyouwanttousetwoPCinourMonitor,
pleaseconnectthesignalcable(D-SUB/
DVI-D/HDMI)respectivelyinMonitorset.
IfyouturntheMonitorsetonwhileitiscold,
thescreenmayflicker.Thisisnormal.
Somered,green,orbluespotsmayappear
onthescreen.Thisisnormal.
"Self Image Setting" Function.
Thisfunctionprovidestheuserwithoptimal
displaysettings.Whentheuserconnects
themonitorforthefirsttime,thisfunction
automaticallyadjuststhedisplaytooptimal
settingsforindividualinputsignals.(Only
supportedinAnalogMode)
‘AUTO’ Function.
Whenyouencounterproblemssuchas
blurryscreen,blurredletters,screenflicker
ortiltedscreenwhileusingthedeviceor
afterchangingscreenresolution,pressthe
AUTOfunctionbuttontoimproveresolution.
(OnlysupportedinAnalogMode)
NOTE NOTE
Connectthesignal
inputcableandtighten
itbyturningthescrews
clockwise.
Donotpressthescreenwithyourfingerfor
alongtimeasthismayresultintemporary
distortiononthescreen.
Avoiddisplayingafixedimageonthe
screenforalongperiodoftimetoprevent
imageburn.Useascreensaverifpossible.
CAUTION SelfImageSettingFunction
Pressthepowerbuttononthefrontpaneltoturn
thepoweron.Whenmonitorpoweristurnedon,
the "Self Image Setting" Functionisexecuted
automatically.(OnlysupportedinAnalogMode)
ENG.indd 11 2011-04-05 �� 1:20:38

12
ENG
ENGLISH
CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
Accessing The Main Menus
1 PressanybuttononthefrontoftheMonitorsettodisplaytheMONITOR SETUP OSDmenu.
2 Pressthedesiredmenuitem.
3 ChangethevalueofthemenuitembypressingthebuttonsonthefrontoftheMonitorset.
Toreturntotheuppermenuorsetothermenuitems,usetheuparrow( )button.
4 SelectEXITtoleavetheOSDmenu.
Monitor set Buttons
MONITOR SETUP
MENU AUTO VOLUME INPUT EXIT
3D
MENU (Seep.13)
Setsthescreenoptions.
AUTO(Seep.5)
Optimizestheresolution.
EXIT
ExitstheOSDmenu.
INPUT
Setstheexternalinput.
3D(Seep.14)
Setsthe3Dmode.
VOLUME(Seep.14)
Setsthevolume.
Differentmenuitemsareenableddependingonthetypeofinputsignal.
D-SUB / DVI Mode:MENU,3D,AUTO,INPUT,EXIT
HDMI Mode: MENU,3D,VOLUME,INPUT,EXIT
NOTE
ENG.indd 12 2011-04-05 �� 1:20:39

13
ENG
ENGLISH
CUSTOMIZING SETTINGS
Customizing Settings
Menu Settings
1 PressanybuttononthefrontoftheMonitorsettodisplaythe
MONITOR SETUP OSDmenu.
2 PresstheMENUbuttontodisplaytheoptionsintheOSD
menu.
3 Settheoptionsbypressingthebuttonsonthefrontofthe
Monitorset.
4 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,usethe
uparrow( )button.
Menu Analog Digital HDMI Description
BRIGHTNESS ●●●Adjuststhebrightnessofthescreen.
ORIGINAL RATIO
●●●
WIDE
Switchtofullscreenmodeaccordingtoinputimagesignal.
ORIGINAL
Changetheinputimagesignalratiotooriginal.
*ThisfunctionworksonlyifinputresolutionislowerthanMonitor
setratio(16:9).
3D COLOR
EFFECT ●●●Thepicturequalityisoptimizedatthe3Dmode.
COLOR TEMP
●●●
PRESET
Selectthescreencolor.
WARM:Setthescreentowarmcolortemperature(morered).
MEDIUM:Setthescreentomediumcolortemperature.
COOL:Setthescreentocoolcolortemperature(Moreblue).
USER
RED:Setyourownredcolorlevels.
GREEN:Setyourowngreencolorlevels.
BLUE:Setyourownbluecolorlevels.
CONTRAST ●●●Adjuststhecontrastofthescreen.
BLACK LEVEL
(Only supported
in HDMI mode) ●
Youcansettheoffsetlevel.Ifyouselect'HIGH',thescreenwillbe
brightandifyouselect‘LOW’,thescreenwillbedark.
Offset: Asthecriteriaforvideosignal,itisthedarkestscreen
themonitorcanshow.
LANGUAGE ●●●Changesthemenulanguage.
SUPER ENERGY
SAVING ●●●SetstheSUPERENERGYSAVINGfunction.
FACTORY ●●●Returnsthemonitortooriginalfactorysettings.
Analog: D-SUB(Analogsignal)input.
Digital: DVI-D(Digitalsignal)input.
HDMI: HDMI(Digitalsignal)input.
MENU
EXIT
BRIGHTNESS
ORIGINAL RATIO
3D COLOR EFFECT
COLOR TEMP
PRESET
RED
GREEN
BLUE
CONTRAST
BLACK LEVEL
LANGUAGE
SUPER ENEYGY SAVING
FACTORY RESET
WIDE
OFF
PRESET
WARM
HIGH
ENGLISH
NO
Theavailableprogramsettingsaredescribedbelow.
100
50
50
50
70
ENG.indd 13 2011-04-05 �� 1:20:39

14
ENG
ENGLISH
CUSTOMIZING SETTINGS
3D Settings(Only 3D mode)
1 PressanybuttononthefrontoftheMonitorsettodisplaythe
MONITOR SETUP OSDmenu.
2 Pressthe3DbuttontodisplaytheoptionsintheOSDmenu.
3 Settheoptionsbypressingthebuttonsonthefrontofthe
Monitorset.
4 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,usethe
uparrow( )button.
Volume Settings (Only supported in HDMI)
1 PressanybuttononthefrontoftheMonitorsettodisplaythe
MONITOR SETUP OSDmenu.
2 PresstheVOLUMEbuttontodisplaytheoptionsintheOSD
menu.
3 Settheoptionsbypressingthebuttonsonthefrontofthe
Monitorset.
4 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,usetheup
arrow( )button.
Theavailablepicturesettingsaredescribedbelow.
Menu Description
3D MODE Selecttheformatof3Dvideodata.(EnabledonlyforHDMIVIDEOTIMING)
SIDE BY SIDE LeftandrightpicturesarearrangedinSidebySidelayout.
TOP & BOTTOM LeftandrightpicturesarearrangedinTopandBottomlayout.
LINE INTERLACED Leftandrightpicturesarearrangedinlinebyline.
OFF Turnsoff3DMode.
3D L/R CHANGE Changeswhichframeisshowntoeacheye.
R-L OddlinesareRightpictureandevenlinesareLeftpicture.
L-R OddlinesareLeftpictureandevenlinesareRightpicture.
3D - > 2D Converts3Dimagesinto2D.(EnabledonlyforHDMIVIDEOTIMING)
OFF Displaysimagesin3D.
ON Displaysimagesin2D.
3DMode.
SIDE BY SIDE TOP & BOTTOM LINE INTERLACED
Ifthe3Doptionselectedisincorrect,imagesmaynotbedisplayedproperly.
NOTE
3D
3D MODE
3D L/R CHANGE
3D - > 2D
OFF(1/4)
R-L(1/2)
OFF
VOLUME
EXIT
EXIT
50
ENG.indd 14 2011-04-05 �� 1:20:42

15
ENG
ENGLISH
CUSTOMIZING SETTINGS
SUPER ENERGY SAVING Settings
1 PressanybuttononthefrontoftheMonitorsetto
displaytheMONITOR SETUP OSDmenu.
2 PresstheMENUbuttontodisplaytheoptionsinthe
OSDmenu.
3 SelectSUPER ENERGY SAVINGbypressingthe
buttonsonthefrontoftheMonitorsetandsetthe
options.
4 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
Theavailablepicturesettingsaredescribedbelow.
Menu Description
ON EnablesSUPERENERGYSAVINGyoucansaveenergywiththisenergy-efficientfunction.
OFF DisablesSUPERENERGYSAVING.
RESET ResetsthevaluesoftotalenergyconsumptionreductionandCO2emissionreductionestimates.
TOTAL POWER REDUCTION:Howmuchpowerissavedwhileusingthemonitor.
TOTAL CO2 REDUCTION:ChangetheTOTALPOWERREDUCTIONtoCO2.
SAVING DATA(W/h)
584mm(23inch)
SUPERSAVING 5W/h
LEDSAVING 12W/h
SavingDatadependsonthePanel.So,thosevaluesshouldbedifferentfromeachpanelandpanel
vendor.
LGcalculatedthesevaluesbyusing “broadcast video signal”.
LEDSavingreferstohowmuchpowercanbesavedusingaWLEDPanelinsteadofCCFLpanel.
SUPERSAVINGreferstohowmuchpowercanbesavedusingtheSUPERENERGYSAVING
function.
NOTE
EXIT
OK
ON OFF RESET
TOTAL POWER REDUCTION: 20 W
TOTAL CO2 REDUCTION: 16 g
SUPER
SAVING
: 5 W/h
LED
SAVING
: 12 W/h
SUPER ENERGY SAVING
ENG.indd 15 2011-04-05 �� 1:20:42

16
ENG
ENGLISH
TROUBLESHOOTING
TROUBLESHOOTING
Check the following before calling for service.
No image appears
Isthepowercordofthedisplay
connected?
Checkandseeifthepowercordisconnectedproperlytothepower
outlet.
Isthepowerindicatorlighton?
PressthePowerbutton.
Isthepoweronandthepower
indicatorblueorgreen?
Adjustthebrightnessandthecontrast.
Isthepowerindicatorflickering?
Ifthedisplayisinpowersavingmode,trymovingthemouseor
pressinganykeyonthekeyboardtobringupthescreen.
TrytoturnonthePC.
Doyouseean"OUTOFRANGE"
messageonthescreen?
ThismessageappearswhenthesignalfromthePC(videocard)is
outofhorizontalorverticalfrequencyrangeofthedisplay.Seethe
'Specifications'sectionofthismanualandconfigureyourdisplay
again.
Doyouseea"CHECKSIGNAL
CABLE"messageonthescreen?
ThismessageappearswhenthesignalcablebetweenyourPCand
yourdisplayisnotconnected.Checkthesignalcableandtryagain.
Do you see a "OSD LOCKED" message on the screen?
Doyousee“OSDLOCKED”when
youpushMENUbutton?
Youcansecurethecurrentcontrolsettings,sothattheycannotbe
inadvertentlychanged.YoucanunlocktheOSDcontrolsatanytime
bypushingtheMENUbuttonforseveralseconds:themessage“OSD
UNLOCKED”willappear.
Display image is incorrect
DisplayPositionisincorrect.
PresstheAUTObuttontoautomaticallyadjustyourdisplayimageto
theidealsetting.
Onthescreenbackground,vertical
barsorstripesarevisible.
PresstheAUTObuttontoautomaticallyadjustyourdisplayimageto
theidealsetting.
Anyhorizontalnoiseappearingin
anyimageorcharactersarenot
clearlyportrayed.
PresstheAUTObuttontoautomaticallyadjustyourdisplayimageto
theidealsetting.
CheckControl Panel ► Display ► Settingsandadjustthedisplay
totherecommendedresolutionoradjustthedisplayimagetotheideal
setting.Setthecolorsettinghigherthan24bits(truecolor).
ENG.indd 16 2011-04-05 �� 1:20:42

17
ENG
ENGLISH
TROUBLESHOOTING
Display image is incorrect
Thescreencolorismonoor
abnormal.
Checkifthesignalcableisproperlyconnectedanduseascrewdriver
tofastenifnecessary.
Makesurethevideocardisproperlyinsertedintheslot.
Setthecolorsettinghigherthan24bits(truecolor)atControl Panel
►Settings.
Thescreenblinks.
Checkifthescreenissettointerlacemodeandifyes,changeittothe
recommendresolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Haveyouinstalledthedisplay
driver?
BesuretoinstallthedisplaydriverfromthedisplaydriverCD(or
diskette)thatcomeswithyourdisplay.Or,youcanalsodownloadthe
driverfromourwebsite:http://www.lg.com.
MakesuretocheckifthevideocardsupportsPlug&Playfunction.
CheckControl Panel ► Display ► Settingsandseeifthefrequencyortheresolutionwere
changed.Ifyes,readjustthevideocardtotherecommendresolution.
Iftherecommendedresolution(optimalresolution)isnotselected,lettersmaybeblurredandthe
screenmaybedimmed,truncatedorbiased.Makesuretoselecttherecommendresolution.
ThesettingmethodcandifferbycomputerandO/S(OperationSystem),andresolutionmentioned
abovemaynotbesupportedbythevideocardperformance.Inthiscase,pleaseasktothecomputer
orthevideocardmanufacturer.
CAUTION
ENG.indd 17 2011-04-05 �� 1:20:43

18
ENG
ENGLISH
TROUBLESHOOTING
TROUBLESHOOTING WHEN USING 3D MODE
I can see a swirling oil-like pattern on the monitor when the monitor is turned off.
ThisiscausedbytheinterferenceofexternallightintheairlayerbetweentheLCDsurfaceand3Dfilter.
Thepatternbecomesalmostinvisiblewhenyouturnonthepoweragain.
I cannot see 3D image properly
Ifyouarenotusingtheglasses
providedwiththemonitor,
Whenyouview3Dimageswiththismonitor,itisveryimportant
thatyouusetheglassesprovidedwiththemonitor.Theglassesare
designedtocompensateopticallyforthe3Dfilterattachedtothe
surfaceofthemonitor.Ifyouwearthird-partyglasses,youmaynot
see3Dimagesproperlyonthemonitor.
Ifyouview3Dimagesoutsidethe
optimalviewingangleordistance,
Theoptimalviewingangleofthemonitoris12°inverticaldirection
while80°inhorizontaldirection;theoptimalviewingdistanceis
between50cmto90cmfromthemonitor.
Whenyouview3Dimagesoutsidetheoptimalviewingangleor
viewingdistance,theimagesmaylookoverlappedornotbedisplayed
properlyin3D.
Ifyouhavenotsettheresolution,
Pleasesettheresolutionofthemonitortothemaximum(1920x
1080@60Hz)inthedisplaysettings.The3Dsoftwaremaynotwork
properlyiftheresolutionisnotsettothemaximum.
Iftheimagesthatyourleftandright
eyesseearereversed,
Thestripeimagesintheodd-numberedlinesaretheonesthatyour
righteyeseesonthemonitor.Ifyouonlyseethestripeimages,not
3Dimages,settheimagesforyourrighteyetobedisplayedinthe
odd-numberedlinesbychangingtheplayerorvieweroptionofthe3D
software.
Icannotsee3Dbutonly2Dimages.
Thismonitorworksbothin2Dand3Dmode.Youcanviewavideoin
3Difitismadein3D.Ifyoutrytoview2Dimagesin3D,theymight
notbedisplayedproperlyoryoumayexperiencepoorpicturequality.
Ifthe‘TriDef3D’couldn’twork
properly
TheminimumsystemrequirementsonPCtorunthe‘TriDef3D’:
»Intel®Core2DuoorAMDAthlon™64X2Dual-CoreCPUorbetter
»1GBRAM
»NVIDIA®GeForce®8600GTorATIX1650XT
»500MBfreediskspace
»Windows®XP(SP2)(32bitonly),Windows®Vista(32bitonly)or
Windows®7(32or64bit)
»DirectX9.0ccompatiblesoundcard
»Internetconnection
»DVD-ROMdrive
»Networkcard
»DirectX9.0c
ENG.indd 18 2011-04-05 �� 1:20:43

19
ENG
ENGLISH
SPECIFICATIONS
SPECIFICATIONS
Display Screen Type 58.4cm(23inch)FlatPanelActivematrix-TFTLCD
Anti-Glarecoating
Visiblediagonalsize:58.4cm
Pixel Pitch 0.265mmx0.265mm(PixelPitch)
Sync Input Horizontal Frequency 30kHzto83kHz(Automatic)
Vertical Frequency 56Hzto75Hz(D-SUB,DVI-D)
56Hzto61Hz(HDMI)
Input Form SeparateSync.Digital
Video Input Signal Input 15pinD-SUBConnector/DVI-DConnector(Digital)
HDMIConnector
Input Form RGBAnalog(0.7Vp-p/75ohm),Digital
Resolution Max D-SUB(Analog):1920x1080@60Hz
DVI/HDMI(Digital):1920x1080@60Hz
Recommend VESA1920x1080@60Hz
Plug & Play DDC2B(Analog,Digital,HDMI)
Power Consumption OnMode:39W(Typ.)
SleepMode≤0.5W
OffMode≤0.5W
Power Input AC100-240V~50/60Hz1.0A
Dimensions
(Width x Height x Depth)
With Stand 54.6cmx40.7cmx17.9cm
Without Stand 54.6cmx34.2cmx5.7cm
Weight 3.5kg
Tilt Range -5°to15°
Environmental
conditions
Operating Temperature
Operating Humidity
10°Cto35°C
20%to80%
Storage Temperature
Storage Humidity
-10°Cto60°C
5%to90%non-Condensing
Stand Base Attached(),Detached(O)
Power cord Wall-outlettype
Productspecificationsshownabovemaybechangedwithoutpriornoticeduetoupgradeofproduct
functions.
ENG.indd 19 2011-04-05 �� 1:20:43

20
ENG
ENGLISH
SPECIFICATIONS
Preset Modes (Resolution)
Display Modes (Resolution) Horizontal
Frequency(kHz)
Vertical
Frequency(Hz) Polarity(H/V)
720x400 31.468 70 -/+
640x480 31.469 60 -/-
640x480 37.500 75 -/-
800x600 37.879 60 +/+
800x600 46.875 75 +/+
1024x768 48.363 60 -/-
1024x768 60.123 75 +/+
1152x864 67.500 75 +/+
1280x1024 63.981 60 +/+
1680x1050 65.290 60 -/+
1920x1080 67.500 60 +/+ RecommendMode
HDMI 3D TIMING
3D Format Resolution Refresh Rate Limitation
FramePacking 1080p 24Hz
FramePacking 720p 50/60Hz
Side-by-Side(Half) 1080p 50/60Hz
Side-by-Side(Half) 1080i 50/60Hz
Side-by-Side(Half) 720p 50/60Hz
Top-and-Bottom 1080p 50/60Hz
Top-and-Bottom 1080p 24Hz
Top-and-Bottom 720p 50/60Hz
Indicator
Mode LED Color
OnMode Blue
SleepMode BlinkingBlue
OffMode Off
ENG.indd 20 2011-04-05 �� 1:20:43
Other manuals for D2342P
2
This manual suits for next models
3
Table of contents
Other LG Monitor manuals