LG Flatron M197WD User manual

Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require
service.
OWNER’S MANUAL
MM1199WWDD
MM2222WWDD
MM2233WWDD
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
IIDD NNuummbbeerr((ss))::5 41 : M22 WD
5 42 : M19 WD
5890 : M23 WD

1
PREPARATION
FRONT PANEL CONTROLS
■
This is a simplified representation of the front panel. The image shown may be somewhat different from your
set.
INPUT MENU VOL PROK
PROGRAMME
Buttons
VOLUME
Buttons
MENU
Button
OK
Button
INPUT
Button
Power
Button
Headp one
Button

2
PREPARATION
BACK PANEL INFORMATION
<M197WD/M227WD>
■
This is a simplified representation of the back panel. The image shown may be somewhat different from your
set.
AV 1 AV 2
AC IN
AUDIO IN
(RGB/DVI) OPTICAL
DIGITAL
AUDIO OUT
VIDEO
COMPONENT
IN AV-IN 3
VIDEO AUDIO
(MONO)
S-VIDEO
AUDIO
Y
P B
P R
L
R
RS-232C IN
(CONTROL & SERVICE)
SERVICE
ONLY
RGB IN (PC)
DVI-D
HDMI
1
2
AV 1
V 1
AV 2
V 2
AC IN
ANTENNA
IN
LR
3
10 11 12
2
1
98 1413
6 74 5
PCMCIA (Personal Computer Memory Card
International Association) Card Slot
(T is feature is not available in all countries.)
Power Cord Socket
T is set operates on AC power. T e voltage is indicat-
ed on t e Specifications page. Never attempt to
operate t e set on DC power.
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI (VIDEO) signal to HDMI IN wit DVI to HDMI
cable.
RGB/DVI Audio Input
Connect t e audio from a PC.
Optical Digital Audio Out
Connect digital audio from various types of eguip-
ment
RGB INPUT (PC)
Connect t e output from a PC.
Audio/Video Input
Connect audio/video output from an external device
to t ese jacks.
SERVICE ONLY PORT
DVI-D Input
Connect t e output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to t e RS-232C port on a PC.
Component Input
Connect a component video/audio device to t ese
jacks.
S-Video Input
Connect S-Video out from an S-VIDEO device.
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an exter-
nal device to t ese jacks.
Antenna Input
Connect over-t e-air signals to t is jack.
1
2
3
4
5
6
7
8
9
10
11
12
13
14

3
PREPARATION <M237WD>
BACK PANEL INFORMATION
■
This is a simplified representation of the back panel. The image shown may be somewhat different from your
set.
AV 1 AV 2
AC IN
AUDIO IN
(RGB/DVI) OPTICAL
DIGITAL
AUDIO OUT
VIDEO
COMPONENT
IN AV-IN 3
VIDEO AUDIO
(MONO)
S-VIDEO
AUDIO
Y
P B
P R
L
R
RS-232C IN
(CONTROL & SERVICE)
SERVICE
ONLY
RGB IN (PC)
DVI-D
HDMI
1
2
AV 1
V 1
AV 2
V 2
AC IN
ANTENNA
IN
LR
3
10 11 12
2
1
98 1413
6 74 5
PCMCIA (Personal Computer Memory Card
International Association) Card Slot
(T is feature is not available in all countries.)
Power Cord Socket
T is set operates on AC power. T e voltage is indicat-
ed on t e Specifications page. Never attempt to
operate t e set on DC power.
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI (VIDEO) signal to HDMI IN wit DVI to HDMI
cable.
RGB/DVI Audio Input
Connect t e audio from a PC.
Optical Digital Audio Out
Connect digital audio from various types of eguip-
ment
RGB INPUT (PC)
Connect t e output from a PC.
Audio/Video Input
Connect audio/video output from an external device
to t ese jacks.
SERVICE ONLY PORT
DVI-D Input
Connect t e output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to t e RS-232C port on a PC.
Component Input
Connect a component video/audio device to t ese
jacks.
S-Video Input
Connect S-Video out from an S-VIDEO device.
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an exter-
nal device to t ese jacks.
Antenna Input
Connect over-t e-air signals to t is jack.
1
2
3
4
5
6
7
8
9
10
11
12
13
14

4
PREPARATION
STAND INSTALLATION
■
The image shown may be somewhat different from your set.
1
2
3
Carefully place the product screen side down on a
cushioned surface that will protect product and
screen from damage.
Insert the ssttaanndd bbaasseeinto the product
Attach the monitor to the Stand Base by turning
the screw to the right.
* Turn the screw by using the screw handle
Screw
<M197WD/M227WD>

5
PREPARATION
STAND INSTALLATION
■
The image shown may be somewhat different from your set.
1
2
3
Carefully place the product screen side down on a
cushioned surface that will protect product and
screen from damage.
Insert the ssttaanndd bbaasseeinto the product
Attach the monitor to the Stand Base by turning
the screw to the right.
* Turn the screw by using the screw handle
Screw
<M237WD>

6
PREPARATION
DETACHING STAND
12
3
Place the set screen side down on a cushion or
soft cloth.
etach the monitor to the Stand Base by turn-
ing the screw to the left.
Turn the screw by using the screw handle 4
Pull the stand base.
5
■
The image shown may be somewhat different from your set.
<M197WD/M227WD>

7
PREPARATION
DETACHING STAND
12
3
Place the set screen side down on a cushion or
soft cloth.
etach the monitor to the Stand Base by turn-
ing the screw to the left.
Turn the screw by using the screw handle 4
Pull the stand base.
5
■
The image shown may be somewhat different from your set.
<M237WD>

8
PREPARATION
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4 inc es on eac side and from t e wall.
4 inches
4 inches
4 inches
4 inches

9
PREPARATION
POSITIONING YOUR DISPLAY
■
The image shown may be somewhat different from your set.
Adjust t e position of t e panel in various ways for maximum comfort.
•• TTiilltt rraannggee
LOCATION
Position your set so t at no brig t lig t or sunlig t falls directly onto t e screen. Care s ould be taken
not to expose t e set to any unnecessary vibration, moisture, dust or eat. Also, ensure t at t e set is
placed in a position to allow a free flow of air. Do not cover t e ventilation openings on t e back cover.
If you intend to mount t e set to a wall, attac VESA standard mounting interface (optional parts) to t e
back of t e set.
W en you install t e set using t e wall mounting bracket (optional parts), attac it carefully so it will not
drop.
-6 ° ~ -2 °
12 ° ~ 18 °
WWaarrnniinngg::
W en adjusting t e angle of t e screen,do not put your
finger(s)in between t e ead of t e monitor and t e stand
body.You can urt your finger(s).