LG M5520C User manual

G
Order Number : GETEC-C1-10-191 FCC Part 15 subpart B
Test Report Number : GETEC-E3-10-100 Page 1 / 1
EUT Type: LCD Monitor
FCC ID.: BEJM5520CJ
APPENDIX G
: USER’S MANUAL

www.lg.com
ENGLISH
MONITOR SIGNAGE
MONITOR SIGNAGE MODELS
M5520C
Please read this manual carefully before operating
your set and retain it for future reference.
OWNER’S MANUAL

2
Table of Contents
Accessories 3
Connecting the stand 4
Connecting the Speakers 5
To install Portrait 6
Using the Remote Control 7
Name and Function of the Parts 9
Connecting to External Devices 10
When Connecting to your PC............................................................................................10
When using the LAN...........................................................................................................12
Daisy Chain Monitors .........................................................................................................13
VESA FDMI wall Mounting .................................................................................................14
Video Input ...........................................................................................................................15
Component Input (480i/480p/576i/576p/720p/1080i/1080p) ..........................................16
HDMI Input (480p/576p/720p/1080i/1080p) ......................................................................17
User Menus 18
Screen Adjustment options...............................................................................................18
OSD Menu ............................................................................................................................20
How to adjust the OSD (On Screen Display) screen .....................................................21
How to adjust the screen automatically ..........................................................................21
Adjusting Screen Color......................................................................................................22
Adjusting the audio function.............................................................................................28
Adjusting the timer function..............................................................................................29
Selecting the options .........................................................................................................30
Adjusts the tile options. .....................................................................................................32
Adjusts the USB options....................................................................................................34
Troubleshooting 48
Specifications 51
Controlling the Multiple Product A1

3
Without prior notice, optional accessories are subject to change to improve the performance of the product, and
new accessories may be added.To purchase optional accessories,
ۚ Optional accessories (purchased separately) may vary depending on the model.
ۚ Note that optional accessories may look different from those shown here.
Thank you for your purchase. Please check the product as well as the accessories shown below
ۚ Note that the accessories may look different from those shown here.
Speaker kit
ۚ Applicable only for models that support the speakers.
Stand kit
ۚ Applicable only for models that support the stand.
Remote Control
/ Batteries
CD-ROM / Cards
D-Sub Signal
Cable
Speaker(2) Screws (4)
/ Cable (2)
Power Cable Audio Cable (PC)
$BCMFIPMEFS$BCMFUJF
They may not
be available
in some areas
or for some
models.
Accessories
Separate purchase
Accessories
Stand (2) Screws (2)

4
Connecting the stand
- Only on some models.
2.
3.
1. Take the parts for the stand out of the box and assemble them as shown in the
picture.
Place a soft cloth on the table and put the product with the screen facing
downward. Connect the stand as shown in the following picture.
Use the screws to secure the stand on the rear side of the product as
shown in the diagram.
First, check if the following parts are all present.
Parts
Stand (2) Screws (2)

5
Connecting the Speakers
Mount the product onto the speaker by using a screw as shown in the following
connect the speaker cable.
When the speaker is installed.
*Connect the input terminal with a proper
color match.
Remove the paper.
Cable holder
After installing your speakers, use holders and cable ties to organize the speaker
cables.
* This feature is not available in all model.
Cable tie
* This feature is not available in all model.
- Only on some models.

6
To install Portrait
"When installing Portrait, rotate it clockwise based on its front."
- Only on some models.

7
Using the Remote Control
Name of the Remote Control Buttons
P
A
G
E
INPUT
ENERGY
SAVING
MARK
ARC
ON
OFF

. , !

ABC

DFG

GHI

JKL

MNO

PQRS

TUV

1/a/A

- * #
WXYZ
CLEAR
OK
S.MENU
MONITOR
PSM
AUTO
MUTE
BRIGHT
NESS
MENU
ID
BACK TILE
ON OFF
EXIT
1
2
5
4
7
6
9
8
13
12
11
10
3
1
2
5
3
4
7
6
9
8
13
12
11
10
Power On / Off Button
- Switches the set on from standby or off to
standby.
Monitor On / Off Button
- Turn off the monitor and then turn it back on.
Number and Alphabet Buttons
- Type numbers.
- It is not available to use Alphabet.
1/a/A Button
- Selects the number and alphabet.
Volume Up/Down Button
- Adjusts the volume.
PSM Button
- Selects the Picture Status Mode.
MUTE Button
- Switches the sound on or off.
MENU Button
- Selects a menu.
- Clears all on-screen displays and returns to
TV viewing from any menu.
Up/Down/Left/Right Buttons
- Allows you to navigate the on-screen menus
and adjust the system settings to your
preferenc.
OK Button
- Accepts your selection or displays the
current mode.
BACK button
- Allows the user to move
return one step in an interactive application.
ID ON/OFF Button
- Enable the monitor lock.
USB Menu control buttons
- Adjust the USB menu(Photo List, Music List
and Movie List ).

8
Energy Saving Button
- Adjust the Energy Saving mode of the SET.
INPUT Select Button
If you press the button once, the following
Input Signal Window will appear. Select the

Clear button
- Delete the numbers and alphabets you
typed.(SuperSign input only)
ARC Button
- Selects the Aspect Ratio Mode
Brightness Key
- Adjust the resolution and brightness by
pressing the Up and Down buttons on the
remote control.
- In USB mode, the OSD menu has the Page
function to move to the next file list.
AUTO Button
- Automatically adjusts picture position and
minimizes image instability.(RGB input only)
S.MENU Button (SuperSign Menu Key)
- It is not available to use this function.
EXIT Button
- Clears all on-screen displays and returns to monitor
viewing from any menu.
 TILE button
- Selects the TILE Mode
Using the Remote Control
1. Slide off the battery cover.
2. Insert the batteries with correct polarity ( + / - ).
3. Close the battery cover.
4. To remove the batteries, perform the installation actions
in reverse.

environmental pollution.
Inserting batteries into remote control.
14
15
16
18
19
17
20
21
22
P
A
G
E
INPUT
ENERGY
SAVING
MARK
ARC
ON
OFF

. , !

ABC

DFG

GHI

JKL

MNO

PQRS

TUV

1/a/A

- * #
WXYZ
CLEAR
OK
S.MENU
MONITOR
PSM
AUTO
MUTE
BRIGHT
NESS
MENU
ID
BACK TILE
ON OFF
EXIT
14
15
18
16
19
17
20
21
22
AAA Type
Input List
AV Component RGB HDMI/DVI

9
Name and Function of the Parts
Rear View
* LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that
the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC
sound card has only Speaker Out, reduce the PC volume. If the Audio Out of the PC sound card
supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program
(Refer to the Sound Card Manual).
* The product image in the user's guide could be different from the actual image.
Power Connector
Connect the power cord
RS-232C Serial Ports
RGB, HDMI/DVI Ports
HDMI Supports High Definition input and HDCP (High-bandwidth Digital
Content Protection). Some devices require HDCP in order to display HD
signals.
PC Sound Jack
Connect the audio cable to the *LINE OUT jack of the PC sound card.
AV Ports
USB Port
LAN Port
Speaker Ports
1
2
4
3
6
5
8
7
1 2 43 65 8
7