LG ProBeam HF80JS User manual

OWNER’S MANUAL
LG ProBeam
DLP Projector
*MFL69727531*
HF80JS
Please read the safety information carefully before using this product.
P/NO : MFL69727531(1701-REV00)
www.lg.com

2
The pictures may differ slightly from the actual product.
Accessories are subject to change without prior notice. New accessories may be
added or old ones removed.
AA
To See the Web Manual
Web manual allows you to easily access detailed Projector
information. Go to http://www.lg.com.

3
1
Step 1. Place the product in the desired location. Connect the power cord to the
power supply, and then turn the product on.
Power On
Power Off
(Press and
Hold)
Volume Control Up/Down/Left/
Right

4
AA

5
2
Step 2. Move the product back and forth to adjust the size of the projected screen,
and then adjust the focus.
[Wide]
2657 mm x 1494 mm
1837 mm
2458 mm
3078 mm
3698 mm
2214 mm x 1245 mm
1771 mm x 996 mm
1328 mm x 747 mm
886 mm x 498 mm
1230 mm
[Tele]
2415 mm x 1358 mm
1837 mm
2458 mm
3078 mm
3698 mm
2013 mm x 1132 mm
1610 mm x 906 mm
1208 mm x 679 mm
805 mm x 453 mm
1230 mm
A B
Width x Height of Projected Screen Projection Distance

6
If the projected screen is not aligned properly, adjust the position of the product or
align the projected screen by using the adjustable leg.
• You can also use the Edge Adjustment (4 Corner Keystone) feature to align
the projected screen, if necessary.
→→PICTURE →Edge Adj.
Edge Adj.(4 Corner Keystone)
1
2
4
3
Focus Ring
Zoom Ring
Tele
Wide

7
3
Step 3. You can connect the product to a desired contents device such as a USB,
etc.
+
+
Some USB Hubs may not work. If a USB device connected through a USB Hub is
not detected, connect it directly to the USB port on the Projector.

8
Licenses
Supported licenses may differ by model. For more information about licenses, visit
www.lg.com.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Vision, Dolby Audio, and the double-D
symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Denition Multimedia
Interface, and the HDMI logo are trademarks or
registered trademarks of HDMI Licensing LLC in the
United States and other countries.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited.
DTS, DTS-HD, the Symbol, & DTS or DTS-HD and the
Symbol together are registered trademarks of DTS, Inc.
© DTS, Inc. All Rights Reserved.

• Image shown may differ from your projector.
• Your projector’s OSD (On Screen Display) may differ slightly from that
shown in this manual.
NOTE

9
Safety precautions
Please take note of the safety instructions to prevent any potential accident or
misuse of the projector.
• Safety precautions are given in two forms, i.e., WARNING and CAUTION as
detailed below.
WARNING Failure to follow the instructions may cause serious injury
and even death.
CAUTION Failure to follow the instructions may cause personal injury or
product damage.
• Read the owner's manual carefully and keep it on hand.
The lightning ash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated dangerous voltage within
the product’s enclosure that may be of sufcient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING/CAUTION
-TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
Read these instructions. Keep these instructions.
Heed all warnings. Follow all instructions.
WARNING
• The grounding wire should be connected. (Except for devices which are not
grounded.)
-Ensure that you connect the grounding cable to avoid electric shock. If it is
not possible to ground the unit, have a qualied electrician install a separate
circuit breaker. Do not try to ground the projector by connecting it to
telephone wires, lightning rods, or gas pipes.

10
• To turn off the main power, remove the power plug, which should be positioned
so it is easy to access for operation.
• Do not place anything containing liquid on top of the projector such as a vase,
ower pot, cup, cosmetics, or medicine; or ornaments, candles, etc.
• Never open any cover on the projector.
-There is a high risk of electric shock.
• Do not look directly into the lens when the projector is in use.
-The bright light may damage your eyes.
• When the lamp is on or has just been turned off, avoid touching the air vent or
lamp, because these will be very hot.
• Proper ventilation required, do not block airflow around unit. Doing so can
cause injury and internal overheating.
• To prevent damage to lamp, unit must remain plugged in for approximately 3
minutes after power down to allow for proper cool down (not applicable on
LED models).
• Do not touch the lens; doing so can result in burns or damage to lens. Lens and
unit may be HOT during and immediately after use. Use caution when handling
unit, allowing for proper cool down.
• Do not insert anything into or cover up the exhaust vents.
-This may result in re or electric shock.
• Do not insert pieces of metal such as coins, hairpins, or metal debris, nor
flammable materials such as paper or matches into the projector.
• Follow all maintenance guidelines for optimal use; service only at an authorized
service centre.
• DISCONNECTING THE DEVICE FROM THE MAIN POWER
-The Power plug is the disconnecting device. In case of an emergency, the
Power Plug must remain readily accessible.

11
CAUTION
• When cleaning plastic parts such as the projector case, unplug the power
first and wipe with a soft cloth. Do not spray with water or wipe with a wet
cloth. Never use glass cleaner, automobile or industrial polish, abrasives, wax,
benzene, or alcohol as these can damage the projector.
• Do not wipe the optical system (lens, mirror) right after the product has been
turned off or while the product is being operated. When cleaning each part of
the product, remove the power cord and wipe gently with a soft cloth. Do not
spray with water or wipe with a wet cloth. Do not use detergents, automobile
or industrial polish, abrasive substances, wax, benzene, alcohol, water, etc. on
the product's main unit or optical system (lens, mirror) as this may damage the
product.
-This can result in re, electric shock or cause damage to the product
(deformation and corrosion).
• When moving the projector, make sure to switch it off and remove the power
plug and cords.
-The power cord may be damaged, resulting in re or electric shock.
Risk Group 2
CAUTION Possibly hazardous optical
radiation emitted from this product.
Do not stare at operating lamp. May be
harmful to the eye.
This label is attached to the bottom of the product.

12
Wireless module (LGSBW41) specications
Wireless LAN (IEEE 802.11a/b/g/n)
Frequency range Output power(Max.)
2400 MHz to 2483.5 MHz
5150 MHz to 5250 MHz
16 dBm
16 dBm
Bluetooth
Frequency range Output power(Max.)
2400 MHz to 2483.5 MHz 10 dBm
• As band channels can vary per country, the user cannot change or adjust the
operating frequency. This product is configured for the regional frequency
table.
• For consideration of the user, this device should be installed and operated with
a minimum distance of 20 cm between the device and the body.
Open source software notice information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses,
that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge
covering the cost of performing such distribution (such as the cost of media,
shipping, and handling) upon email request to [email protected]. This offer is
valid for three (3) years from the date on which you purchased the product.

13
Specications
MODEL HF80JS(HF80JS-EU)
Resolution (Pixel) 1920 (Horizontal) × 1080 (Vertical)
Aspect ratio 16:9 (Horizontal:Vertical)
Panel size 11.938 mm
Projection distance
(Video size)
905 mm to 3698 mm (762 mm to 3048 mm)
Ratio of upward
projection 100 %
Working range of
the remote control 6 m
Power AC 100 - 240 V, 50 Hz/ 60 Hz
Power consumption 140 W
AC-DC Adaptor
Manufacturer : Lien Chang
Model : LCAP31
19 V 7.37 A
(Adaptor Input 100-240 V @ 50/60 Hz)
Audio Output 3 W + 3 W
Height 140 mm (without foot), 144 mm (with foot)
Width 108.0 mm
Depth 252.3 mm
Weight 2.1 kg
USB Device 5 V, 0.5 A (Max.)
Environment
Condition
Temperature
Operation 0 °C to 40 °C
Storage -20 °C to 60 °C
Relative Humidity
Operation 0 % to 80 %
Storage 0 % to 85 %
• Use only power supplies listed in the user instructions.
• Contents in this manual may be changed without prior notice due to upgrade
of product functions.

The model and serial number of the projector are
located on the back or on the side of the projector.
Record them below should you ever need service.
MODEL
SERIAL