LG SH3B Specification sheet

SIMPLE MANUAL
Wireless
Sound Bar
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
SH3B
MODEL
*MFL69504957*
ENGLISH DEUTSCH FRANÇAIS
NEDERLANDS SLOVENŠČINA
ITALIANO ESPAÑOL ΕΛΛΗΝΙΚΑ
PORTUGUÊS
Copyright © 2017 LG Electronics. All Rights Reserved
www.lg.com
SH3B.DWEULLZ_SIM_ENG_4957.indd 1 2017-04-24 �� 4:08:11

Front Panel
Rear Panel
·································· Standby/ON
······························ Selects Function
··························Adjusts Volume
PORT.IN ·············· Connect to a Portable device
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
Subwoofer Connection1
Place the wireless subwoofer near the sound bar and
follow steps below.
aConnect the power cord of wireless
subwoofer to the outlet.
bTurn on the sound bar :
The sound bar and wireless subwoofer will
be automatically connected. The subwoofer's
yellow - green LED turns on.
Subwoofer Connection Manually
aReset the subwoofer
If the yellow - green LED on the subwoofer
blinks quickly, skip this step and go to b
yPress and hold PAIRING button for 5 seconds.
yThe LED lights up alternately in red and yellow
- green.
yPlug out the power cord. After the LED turns
off completely, plug in the power cord again.
When the reset is completed, the subwoofer's
yellow - green LED blinks quickly.
bReset the sound bar
yAdjust volume to minimum until the red LED
on the sound bar lights up for a while.
yPress and hold (Mute) button on the remote
control for 3 seconds.
yThe red LED on the sound bar blinks quickly.
yTurn the sound bar’s power off and on while
the subwoofer’s yellow - green LED blinks.
When the connection is completed, you can see the
yellow - green LED on the subwoofer.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1m to prevent wireless
interference.
!P
SH3B.DWEULLZ_SIM_ENG_4957.indd 2 2017-04-24 �� 4:08:13

ASC/STANDARD/CINEMA : Selects sound effect.
DRC ON/OFF : Makes comfortable sound at Dolby Digital.
WOOFER LEVEL+/- : Adjusts the volume level of subwoofer.
AUTO POWER ON/OFF : Automatically turns on by an
input source.
Replacement of battery
Remote control
TV Connection2
aConnect the sound bar to the TV using
Optical cable.
bSet up [External Speaker (Optical)] on
your TV setting menu.
TV
Addtional Device Connection
aConnect to the external device as follows.
TV
(Set-top Box,
Player etc.)
bSet the input source by pressing Fon the
remote control or unit repeatedly.
Additional Information
Specication
Power requirements Refer to the main label.
Power
consumption
Refer to the main label.
Networked standby : 0.5 W
(If all network ports are
activated.)
Dimensions
(W x H x D)
Approx.
950 mm x 71 mm x 47 mm
Net Weight Approx. 2.47 kg
Amplier
(Total RMS
Output power)
300 W
Design and specications are subject to change without
notice.
How to disconnect the wireless network
connection or the wireless device
Set up the AUTO POWER ON/OFF function to off and
turn off the unit.
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment type
Wireless Sound Bar is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be installed and
operated with a minimum distance of 20 cm between the device
and the body.
Frequency range Output power (Max.)
2401 to 2481 MHz 10 dBm
2402 to 2480 MHz 10 dBm
2403 to 2478 MHz 10 dBm
SH3B.DWEULLZ_SIM_ENG_4957.indd 3 2017-04-24 �� 4:08:14

SH3B.DWEULLZ_SIM_ENG_4957.indd 4 2017-04-24 �� 4:08:14