LG SK1 User manual
LG Customer Information Center
1-888-542-2623 CANADA
Register your product Online!
www.lg.com
Industry Canada Statement
[For having wireless function (WLAN, Bluetooth,...)]
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
i. the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile
satellite systems;
ii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the
bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the
e.i.r.p. limit;
iii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as
appropriate; and
iv. [for devices operating in the band 5250-5350 MHz
having an e.i.r.p. greater than 200 mW] antenna
type(s), antenna models(s), and worst-case tilt
angle(s) necessary to remain compliant with the
e.i.r.p. elevation mask requirement set forth in
section 6.2.2.3 of RSS-247 shall be clearly indicated.
Users should also be advised that high-power radars
are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5650-5850 MHz and that
these radars could cause interference and/or damage to
LE-LAN devices.
SIMPLE MANUAL
Sound Bar
ENGLISH
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
SK1
MODEL
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
www.lg.com
Front Panel TV Connection
aConnect the sound bar to the TV using
Optical cable.
bSet up [External Speaker (Optical)] on
your TV setting menu.
TV
Additional Device Connection
aConnect to the external device as follows.
TV
(Set-top Box,
Player etc.)
bSet the input source by pressing OPTICAL on the
remote control.
STANDARD/BASS BLAST : Selects the sound effect.
DRC ON/OFF :
Makes comfortable sound at Dolby Digital.
Replacement of battery
Remote control Additional Information
Specication
Power
requirements Refer to the main label.
Power
consumption Refer to the main label.
Dimensions
(W x H x D)
Approx.
650.0 mm x 79.0 mm x
94.0 mm With foot
(25.6 inch x 3.1 inch x 3.7
inch)
Amplier
(Total RMS
Output power)
40 W RMS
Design and specications are subject to change
without notice.
Wall mounting (Optional)
You can mount the main unit on a wall by using holes on
the rear of the unit. For details, download the online owner’s
manual. http://www.lg.com
a b
dc
BUY :
MFL70443683
A State LED
yWhite (Staying on): Optical function is selected.
yWhite (Blinking twice and staying on): LG Sound
Sync (Optical) function is selected.
yGreen (Staying on): Portable function is selected.
yRed (Staying on): Standby mode without
network connection.
B Bluetooth LED
yBlue (Blinking): Waiting for Bluetooth
connection.
yBlue (Staying on): Paired with Bluetooth device.
This unit operates only with the remote
control.
Rear Panel
USB (Service only) ····· S/W download connector.
PORT. IN (Portable) Connect to a portable device.
OPT. IN (Optical) ·····Connect to an optical device.
SK1.ACANLLK_SIM (Sheet)_MFL70443683.indd 1,4 2018-05-25 4:07:09
LG Customer Information Center
1-888-542-2623 CANADA
Register your product Online!
www.lg.com
Industry Canada Statement
[For having wireless function (WLAN, Bluetooth,...)]
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
i. the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile
satellite systems;
ii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the
bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the
e.i.r.p. limit;
iii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as
appropriate; and
iv. [for devices operating in the band 5250-5350 MHz
having an e.i.r.p. greater than 200 mW] antenna
type(s), antenna models(s), and worst-case tilt
angle(s) necessary to remain compliant with the
e.i.r.p. elevation mask requirement set forth in
section 6.2.2.3 of RSS-247 shall be clearly indicated.
Users should also be advised that high-power radars
are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5650-5850 MHz and that
these radars could cause interference and/or damage to
LE-LAN devices.
SIMPLE MANUAL
Sound Bar
ENGLISH
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
SK1
MODEL
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
www.lg.com
Front Panel TV Connection
aConnect the sound bar to the TV using
Optical cable.
bSet up [External Speaker (Optical)] on
your TV setting menu.
TV
Additional Device Connection
aConnect to the external device as follows.
TV
(Set-top Box,
Player etc.)
bSet the input source by pressing OPTICAL on the
remote control.
STANDARD/BASS BLAST : Selects the sound effect.
DRC ON/OFF :
Makes comfortable sound at Dolby Digital.
Replacement of battery
Remote control Additional Information
Specication
Power
requirements Refer to the main label.
Power
consumption Refer to the main label.
Dimensions
(W x H x D)
Approx.
650.0 mm x 79.0 mm x
94.0 mm With foot
(25.6 inch x 3.1 inch x 3.7
inch)
Amplier
(Total RMS
Output power)
40 W RMS
Design and specications are subject to change
without notice.
Wall mounting (Optional)
You can mount the main unit on a wall by using holes on
the rear of the unit. For details, download the online owner’s
manual. http://www.lg.com
a b
dc
BUY :
MFL70443683
A State LED
yWhite (Staying on): Optical function is selected.
yWhite (Blinking twice and staying on): LG Sound
Sync (Optical) function is selected.
yGreen (Staying on): Portable function is selected.
yRed (Staying on): Standby mode without
network connection.
B Bluetooth LED
yBlue (Blinking): Waiting for Bluetooth
connection.
yBlue (Staying on): Paired with Bluetooth device.
This unit operates only with the remote
control.
Rear Panel
USB (Service only) ····· S/W download connector.
PORT. IN (Portable) Connect to a portable device.
OPT. IN (Optical) ·····Connect to an optical device.
SK1.ACANLLK_SIM (Sheet)_MFL70443683.indd 1,4 2018-05-25 4:07:09
LG Customer Information Center
1-888-542-2623 CANADA
Register your product Online!
www.lg.com
Industry Canada Statement
[For having wireless function (WLAN, Bluetooth,...)]
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
i. the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile
satellite systems;
ii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the
bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the
e.i.r.p. limit;
iii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as
appropriate; and
iv. [for devices operating in the band 5250-5350 MHz
having an e.i.r.p. greater than 200 mW] antenna
type(s), antenna models(s), and worst-case tilt
angle(s) necessary to remain compliant with the
e.i.r.p. elevation mask requirement set forth in
section 6.2.2.3 of RSS-247 shall be clearly indicated.
Users should also be advised that high-power radars
are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5650-5850 MHz and that
these radars could cause interference and/or damage to
LE-LAN devices.
SIMPLE MANUAL
Sound Bar
ENGLISH
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
SK1
MODEL
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
www.lg.com
Front Panel TV Connection
aConnect the sound bar to the TV using
Optical cable.
bSet up [External Speaker (Optical)] on
your TV setting menu.
TV
Additional Device Connection
aConnect to the external device as follows.
TV
(Set-top Box,
Player etc.)
bSet the input source by pressing OPTICAL on the
remote control.
STANDARD/BASS BLAST : Selects the sound effect.
DRC ON/OFF :
Makes comfortable sound at Dolby Digital.
Replacement of battery
Remote control Additional Information
Specication
Power
requirements Refer to the main label.
Power
consumption Refer to the main label.
Dimensions
(W x H x D)
Approx.
650.0 mm x 79.0 mm x
94.0 mm With foot
(25.6 inch x 3.1 inch x 3.7
inch)
Amplier
(Total RMS
Output power)
40 W RMS
Design and specications are subject to change
without notice.
Wall mounting (Optional)
You can mount the main unit on a wall by using holes on
the rear of the unit. For details, download the online owner’s
manual. http://www.lg.com
a b
dc
BUY :
MFL70443683
A State LED
yWhite (Staying on): Optical function is selected.
yWhite (Blinking twice and staying on): LG Sound
Sync (Optical) function is selected.
yGreen (Staying on): Portable function is selected.
yRed (Staying on): Standby mode without
network connection.
B Bluetooth LED
yBlue (Blinking): Waiting for Bluetooth
connection.
yBlue (Staying on): Paired with Bluetooth device.
This unit operates only with the remote
control.
Rear Panel
USB (Service only) ····· S/W download connector.
PORT. IN (Portable) Connect to a portable device.
OPT. IN (Optical) ·····Connect to an optical device.
SK1.ACANLLK_SIM (Sheet)_MFL70443683.indd 1,4 2018-05-25 4:07:09
LG Customer Information Center
1-888-542-2623 CANADA
Register your product Online!
www.lg.com
Industry Canada Statement
[For having wireless function (WLAN, Bluetooth,...)]
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
i. the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile
satellite systems;
ii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the
bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the
e.i.r.p. limit;
iii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as
appropriate; and
iv. [for devices operating in the band 5250-5350 MHz
having an e.i.r.p. greater than 200 mW] antenna
type(s), antenna models(s), and worst-case tilt
angle(s) necessary to remain compliant with the
e.i.r.p. elevation mask requirement set forth in
section 6.2.2.3 of RSS-247 shall be clearly indicated.
Users should also be advised that high-power radars
are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5650-5850 MHz and that
these radars could cause interference and/or damage to
LE-LAN devices.
SIMPLE MANUAL
Sound Bar
ENGLISH
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
SK1
MODEL
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
www.lg.com
Front Panel TV Connection
aConnect the sound bar to the TV using
Optical cable.
bSet up [External Speaker (Optical)] on
your TV setting menu.
TV
Additional Device Connection
aConnect to the external device as follows.
TV
(Set-top Box,
Player etc.)
bSet the input source by pressing OPTICAL on the
remote control.
STANDARD/BASS BLAST : Selects the sound effect.
DRC ON/OFF :
Makes comfortable sound at Dolby Digital.
Replacement of battery
Remote control Additional Information
Specication
Power
requirements Refer to the main label.
Power
consumption Refer to the main label.
Dimensions
(W x H x D)
Approx.
650.0 mm x 79.0 mm x
94.0 mm With foot
(25.6 inch x 3.1 inch x 3.7
inch)
Amplier
(Total RMS
Output power)
40 W RMS
Design and specications are subject to change
without notice.
Wall mounting (Optional)
You can mount the main unit on a wall by using holes on
the rear of the unit. For details, download the online owner’s
manual. http://www.lg.com
a b
dc
BUY :
MFL70443683
A State LED
yWhite (Staying on): Optical function is selected.
yWhite (Blinking twice and staying on): LG Sound
Sync (Optical) function is selected.
yGreen (Staying on): Portable function is selected.
yRed (Staying on): Standby mode without
network connection.
B Bluetooth LED
yBlue (Blinking): Waiting for Bluetooth
connection.
yBlue (Staying on): Paired with Bluetooth device.
This unit operates only with the remote
control.
Rear Panel
USB (Service only) ····· S/W download connector.
PORT. IN (Portable) Connect to a portable device.
OPT. IN (Optical) ·····Connect to an optical device.
SK1.ACANLLK_SIM (Sheet)_MFL70443683.indd 1,4 2018-05-25 4:07:09
LG Customer Information Center
1-888-542-2623 CANADA
Register your product Online!
www.lg.com
Industry Canada Statement
[For having wireless function (WLAN, Bluetooth,...)]
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
i. the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile
satellite systems;
ii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the
bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the
e.i.r.p. limit;
iii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as
appropriate; and
iv. [for devices operating in the band 5250-5350 MHz
having an e.i.r.p. greater than 200 mW] antenna
type(s), antenna models(s), and worst-case tilt
angle(s) necessary to remain compliant with the
e.i.r.p. elevation mask requirement set forth in
section 6.2.2.3 of RSS-247 shall be clearly indicated.
Users should also be advised that high-power radars
are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5650-5850 MHz and that
these radars could cause interference and/or damage to
LE-LAN devices.
SIMPLE MANUAL
Sound Bar
ENGLISH
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
SK1
MODEL
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
www.lg.com
Front Panel TV Connection
aConnect the sound bar to the TV using
Optical cable.
bSet up [External Speaker (Optical)] on
your TV setting menu.
TV
Additional Device Connection
aConnect to the external device as follows.
TV
(Set-top Box,
Player etc.)
bSet the input source by pressing OPTICAL on the
remote control.
STANDARD/BASS BLAST : Selects the sound effect.
DRC ON/OFF :
Makes comfortable sound at Dolby Digital.
Replacement of battery
Remote control Additional Information
Specication
Power
requirements Refer to the main label.
Power
consumption Refer to the main label.
Dimensions
(W x H x D)
Approx.
650.0 mm x 79.0 mm x
94.0 mm With foot
(25.6 inch x 3.1 inch x 3.7
inch)
Amplier
(Total RMS
Output power)
40 W RMS
Design and specications are subject to change
without notice.
Wall mounting (Optional)
You can mount the main unit on a wall by using holes on
the rear of the unit. For details, download the online owner’s
manual. http://www.lg.com
a b
dc
BUY :
MFL70443683
A State LED
yWhite (Staying on): Optical function is selected.
yWhite (Blinking twice and staying on): LG Sound
Sync (Optical) function is selected.
yGreen (Staying on): Portable function is selected.
yRed (Staying on): Standby mode without
network connection.
B Bluetooth LED
yBlue (Blinking): Waiting for Bluetooth
connection.
yBlue (Staying on): Paired with Bluetooth device.
This unit operates only with the remote
control.
Rear Panel
USB (Service only) ····· S/W download connector.
PORT. IN (Portable) Connect to a portable device.
OPT. IN (Optical) ·····Connect to an optical device.
SK1.ACANLLK_SIM (Sheet)_MFL70443683.indd 1,4 2018-05-25 4:07:09
LG Customer Information Center
1-888-542-2623 CANADA
Register your product Online!
www.lg.com
Industry Canada Statement
[For having wireless function (WLAN, Bluetooth,...)]
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
i. the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile
satellite systems;
ii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the
bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the
e.i.r.p. limit;
iii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as
appropriate; and
iv. [for devices operating in the band 5250-5350 MHz
having an e.i.r.p. greater than 200 mW] antenna
type(s), antenna models(s), and worst-case tilt
angle(s) necessary to remain compliant with the
e.i.r.p. elevation mask requirement set forth in
section 6.2.2.3 of RSS-247 shall be clearly indicated.
Users should also be advised that high-power radars
are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5650-5850 MHz and that
these radars could cause interference and/or damage to
LE-LAN devices.
SIMPLE MANUAL
Sound Bar
ENGLISH
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
SK1
MODEL
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
www.lg.com
Front Panel TV Connection
aConnect the sound bar to the TV using
Optical cable.
bSet up [External Speaker (Optical)] on
your TV setting menu.
TV
Additional Device Connection
aConnect to the external device as follows.
TV
(Set-top Box,
Player etc.)
bSet the input source by pressing OPTICAL on the
remote control.
STANDARD/BASS BLAST : Selects the sound effect.
DRC ON/OFF :
Makes comfortable sound at Dolby Digital.
Replacement of battery
Remote control Additional Information
Specication
Power
requirements Refer to the main label.
Power
consumption Refer to the main label.
Dimensions
(W x H x D)
Approx.
650.0 mm x 79.0 mm x
94.0 mm With foot
(25.6 inch x 3.1 inch x 3.7
inch)
Amplier
(Total RMS
Output power)
40 W RMS
Design and specications are subject to change
without notice.
Wall mounting (Optional)
You can mount the main unit on a wall by using holes on
the rear of the unit. For details, download the online owner’s
manual. http://www.lg.com
a b
dc
BUY :
MFL70443683
A State LED
yWhite (Staying on): Optical function is selected.
yWhite (Blinking twice and staying on): LG Sound
Sync (Optical) function is selected.
yGreen (Staying on): Portable function is selected.
yRed (Staying on): Standby mode without
network connection.
B Bluetooth LED
yBlue (Blinking): Waiting for Bluetooth
connection.
yBlue (Staying on): Paired with Bluetooth device.
This unit operates only with the remote
control.
Rear Panel
USB (Service only) ····· S/W download connector.
PORT. IN (Portable) Connect to a portable device.
OPT. IN (Optical) ·····Connect to an optical device.
SK1.ACANLLK_SIM (Sheet)_MFL70443683.indd 1,4 2018-05-25 4:07:09
LG Customer Information Center
1-888-542-2623 CANADA
Register your product Online!
www.lg.com
Industry Canada Statement
[For having wireless function (WLAN, Bluetooth,...)]
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
i. the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile
satellite systems;
ii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the
bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the
e.i.r.p. limit;
iii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as
appropriate; and
iv. [for devices operating in the band 5250-5350 MHz
having an e.i.r.p. greater than 200 mW] antenna
type(s), antenna models(s), and worst-case tilt
angle(s) necessary to remain compliant with the
e.i.r.p. elevation mask requirement set forth in
section 6.2.2.3 of RSS-247 shall be clearly indicated.
Users should also be advised that high-power radars
are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5650-5850 MHz and that
these radars could cause interference and/or damage to
LE-LAN devices.
SIMPLE MANUAL
Sound Bar
ENGLISH
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
SK1
MODEL
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
www.lg.com
Front Panel TV Connection
aConnect the sound bar to the TV using
Optical cable.
bSet up [External Speaker (Optical)] on
your TV setting menu.
TV
Additional Device Connection
aConnect to the external device as follows.
TV
(Set-top Box,
Player etc.)
bSet the input source by pressing OPTICAL on the
remote control.
STANDARD/BASS BLAST : Selects the sound effect.
DRC ON/OFF :
Makes comfortable sound at Dolby Digital.
Replacement of battery
Remote control Additional Information
Specication
Power
requirements Refer to the main label.
Power
consumption Refer to the main label.
Dimensions
(W x H x D)
Approx.
650.0 mm x 79.0 mm x
94.0 mm With foot
(25.6 inch x 3.1 inch x 3.7
inch)
Amplier
(Total RMS
Output power)
40 W RMS
Design and specications are subject to change
without notice.
Wall mounting (Optional)
You can mount the main unit on a wall by using holes on
the rear of the unit. For details, download the online owner’s
manual. http://www.lg.com
a b
dc
BUY :
MFL70443683
A State LED
yWhite (Staying on): Optical function is selected.
yWhite (Blinking twice and staying on): LG Sound
Sync (Optical) function is selected.
yGreen (Staying on): Portable function is selected.
yRed (Staying on): Standby mode without
network connection.
B Bluetooth LED
yBlue (Blinking): Waiting for Bluetooth
connection.
yBlue (Staying on): Paired with Bluetooth device.
This unit operates only with the remote
control.
Rear Panel
USB (Service only) ····· S/W download connector.
PORT. IN (Portable) Connect to a portable device.
OPT. IN (Optical) ·····Connect to an optical device.
SK1.ACANLLK_SIM (Sheet)_MFL70443683.indd 1,4 2018-05-25 4:07:09
Other manuals for SK1
4
Table of contents
Other LG Speakers System manuals
