LG SN8Y Specification sheet
SIMPLE MANUAL
Please read this manual carefully before operating your set and retain it
for future reference.
To view the instructions of advanced features, visit http://www.lg.com
and then download Owner’s Manual. Some of the content in this manual
may differ from your unit.
MODEL
SN8Y
www.lg.com
Copyright © 2020 LG Electronics Inc. All Rights Reserved.2003_Rev01
LG Wi-Fi
Sound Bar
MFL71698814
ENGLISH
МАКЕДОНСКИ
SHQIP BOSANSKI MAGYAR
БЪЛГАРСКИ HRVATSKI SRPSKI
ROMÂNĂ
SLOVENŠČINA
SN8Y.DHUNLLK_SIMPLE_ENG_MFL71698814.indd 1 2020-05-13 9:42:01
Front Panel
1(Standby) ············Switches the unit ON or OFF.
F(Function) ··························Selects function.
p/o(Volume)······················ Adjusts volume.
/(Wi-Fi) ····················Selects Wi-Fi function.
Reset the Unit
Press and hold the /on the unit until you
hear the beep sound once.
Rear Panel
DC IN····················· Connect to the AC adapter.
HDMI IN········ Connect to device with HDMI OUT.
HDMI OUT (TV eARC/ARC) ······· Connect to a TV.
OPTICAL IN·············Connect to an optical device.
USB port ····················Connect to a USB device.
Make sure to properly align and connect
the optical cable; improper alignment may
cause damage to the jack.
Subwoofer Connection
Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of the sound bar and the
wireless subwoofer to the outlet.
b Turn on the sound bar.
• The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
green LED turns on.
Manually Subwoofer Connection
If the subwoofer does not make sound, try to
connect manually.
a Press Pairing on the rear of the wireless
subwoofer.
• The green LED on the rear of the wireless
subwoofer blinks quickly.
(If the green LED does not blink, press and
hold the Pairing.)
b Turn on the sound bar.
• Pairing is completed. The green LED on the
rear of the wireless subwoofer turns on.
Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m to prevent
wireless interference.
!1 m
SN8Y.DHUNLLK_SIMPLE_ENG_MFL71698814.indd 2 2020-05-13 9:42:02
TV Connection
Connect the sound bar and TV using Optical ( ) or
HDMI ARC ( ).
Optical Connection
a Connect the sound bar to the TV using Optical
cable.
b Set up [External Speaker (Optical)] on your TV
setting menu.
HDMI (TV eARC/ARC) Connection
a Connect the sound bar to the TV using HDMI
cable.
b Set up [External Speaker (HDMI ARC)] on your
TV setting menu.
• HDMI connection is unavailable if your TV
does not support HDMI ARC.
• If this unit is connected by OPTICAL and
ARC at the same time, the ARC signal has
a higher priority.
Additional Device Connection
a Connect to the external device like as follow.
(Set-top Box,
Player etc.)
OR
b Set the input source by pressing Frepeatedly.
Network Connection
a
b
c
a Check network condition. A router connected to
network should be installed.
b Connect your smart device to your home
network.
c Connect the sound bar to the power supply.
All devices should be connected to same
router.
Step.1 Install “Google Home” App
Download the Google Home App from the Google
Play or App Store.
Step.2 Set up the Wi-Fi connection with
app
a Connect your smart device to the Wi-Fi network
that you’ll use for your unit.
In case of iOS devices, it should be turned
on Bluetooth setting on your smart device.
b Launch the “Google Home” app.
c Follow the steps for Wi-Fi connection on the app.
• When the unit is properly connected to Wi-Fi,
“CONNECTED” will appear on the display
window with sound.
• When connect to Wi-Fi, this app may
request to create a Google Account. You
will need a Google account to use this app.
• “Google Home” app is provided by Google.
It might be revised by a change of Google
Policy.
SN8Y.DHUNLLK_SIMPLE_ENG_MFL71698814.indd 3 2020-05-13 9:42:03
Remote control
Replacement of Battery
SOUND EFFECT: Selects a sound effect mode.
- TV remote: Long press SOUND EFFECT and
press it again to use TV remote control.
FOLDER W/S:Searches a folder.
J:Displaystheinformationofale,aninput
source, a connected Bluetooth device name or an
application name.
- Auto Power ON/OFF: Long press Jand press
it again.
: Adjusts sound level of each speaker.
- Surround sound: Long press and press it
again.
REPEAT:Listenstoyourlesrepeatedlyorrandomly.
Additional
Download LG Wi-Fi Speaker Application
You can manage the speaker settings and control the
speaker by using “LG Wi-Fi Speaker”.
Download “LG Wi-Fi Speaker” on the App Store or
Google Play Store.
AI Room calibration
AI Room Calibration is a sound tuning tool, which
adjusts the audio settings of the Sound Bar based on
the room acoustics and environment.
To access the AI Room Calibration it is necessary to
install the “LG Wi-Fi Speaker” app. On [My Speaker]
menu, click setting icon and choose [AI Room
Calibration].
Additional Information
Specication
Power
consumption
Refer to the main label.
Networked standby : 5.0 W
(If all network ports are
activated.)
AC adapter
• Model: DA-50F25
• Manufacturer : Asian Power
Devices Inc.
• Input: 100 - 240 V ~ 50 - 60 Hz
• Output: 25 V 02 A
Dimensions
(W x H x D)
Approx.
1060.0 mm x 57.0 mm x 119.0
mm (with foot)
Bus Power
Supply (USB) 5 V 0500 mA
Amplier
(Total RMS
Output
power)
440 W RMS
Designandspecicationsaresubjecttochange
without notice.
Rear Speakers Ready
Ready for surround sound with Rear
Speakers Kit sold separately. (SPK8-S)
How to disconnect the wireless network
connection or the wireless device
Turn off the unit by pressing the power button for
more than 3 seconds.
SN8Y.DHUNLLK_SIMPLE_ENG_MFL71698814.indd 4 2020-05-13 9:42:04
Other manuals for SN8Y
2
Other LG Speakers System manuals
