LG SQC1 User manual
www.lg.com
版權所有 © 2023 LG Electronics Inc. 保留一切權利。
SQC1
簡易手冊
無線
Sound Bar
WIRELESS SOUND BAR
2211_Rev01
MFL71933322
ENGLISH
Specication
Power consumption
yRefer to the main label.
AC adapter
yModel : A931-230087W-M21
yManufacturer : Dongguan Aohai Technology Co.,Ltd.
yInput : 100 - 240 V ~ 50/60 Hz
yOutput : 23.0 V 00.87 A
Dimensions (W x H x D): Approx. 660.0 mm x 56.0 mm x 99.0
mm
Bus Power Supply (USB): 5 V 0500 mA
Amplier (Total RMS Output power): 160 W RMS
IMPORTANT SAFETY NOTICE
The cord grip for the plug tted to this product is built into the
existing power cord as supplied. If, for any reason you need to
shorten the cord,
DO NOT RE-USE THE PLUG
A new plug must be used to ensure your continued safety by
securing the plug to the power cord in accordance with Plug &
Socket Regulations 1994.
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment type
Wireless Sound Bar is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at
the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be installed and
operated with a minimum distance of 20 cm between the device
and the body.
中文
規格
電源耗用
y請參閱主標籤。
電源適配器
y型號：A931-230087W-M21
y製造商：Dongguan Aohai Technology Co.,Ltd.
y輸入：100 - 240 V ~ 50/60 Hz
y輸出：23.0 V 0 0.87 A
尺寸（闊 x 高 x 深）: 大約 660.0 mm x 56.0 mm x 99.0 mm
匯流排電源供應 (USB): 5 V 0 500 mA
擴音器（RMS 總輸出功率）: 160 W RMS
安全注意事項
本機的插頭握柄是專爲本産品所設計,且與附
贈的電源線結合為一體,若您因爲任何理由而
需截短此電源線時
請勿再使用該插頭
應使用全新的插頭以確保連續使用之安全性。
請依據1994年之插頭及插座規範的規定,將插頭
確實地與電源線結合。
符合標準聲明
在此，LG電子聲明 無線Sound Bar 類型的的無線電設備符
合 2014/53/EU指令。你可以從以下互聯網地址獲得歐盟符
合性聲明的全文：
http://www.lg.com/global/support/cedoc/cedoc#
爲使用者安全着想，安裝或使用裝置時，身體與裝置之間
的距離不應少於 20 厘米。
SQC1.DHKGLLK_SIMPLE (Sheet)_MFL71933322.indd 1-3 2023-07-21 3:54:43
ENGLISH
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner’s Manual. Some of the content in this manual may differ from your product.
ASound bar
BFunction LED / Remote Control Receiver
CWireless Subwoofer - Install it close to the sound bar.
DExternal Device - (Blu-ray player, game console, etc.)
aConnectthesoundbartoyourTVviaanopticalcable.
b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the TV via an HDMI cable.
c Connect to power in the following order: wireless subwoofer [sound bar. Then, turn on the sound bar. When the connection is
automatically established with the sound bar, the LED on the wireless subwoofer will light up green.
d UsingtheproductwithyourTV
A Press the Fbutton repeatedly or OPTICAL button once until the OPTICAL LED appears on the function LED.
BOn your TV’s settings, set the output speaker to [Optical] or [External Speaker].
eConnectingtheproducttoyoursmartphoneviaBluetooth
ATap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. ( Off >
On)
BPress the Fbutton repeatedly until the blinking Bluetooth LED appears on the function LED.
CFind and select the sound bar on your smartphone. The product should appear as “LG SQC1 (XX)”.
DWhen the product is connected to your smartphone via Bluetooth, the Bluetooth LED turns on.
IfyouseearedLEDonthebackofthewirelesssubwoofer,itmeansthatthesoundbarisnotconnectedtothesubwoofer.Ifthisisthe
case,connecttheminthefollowingorder.
APress the Power button on the sound bar to turn it off.
BPress the Pairing button on the back of the wireless subwoofer. Check if LED blinks green.
-If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the back of the subwoofer again.
CPress the Power button on the sound bar to turn it on.
DWhen the connection is established, you will see a green LED light on the back of the wireless subwoofer.
Keep the sound bar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
yActual features, functionality, and other product specications may differ and are subject to change without notice.
HDMI OUT
OPT.IN
D
B
A
a
b
C
OPTICAL
OUT
HDMI IN
PORT.IN
更換電池
Replacement of Battery
中文
產品安裝及使用
操作設備前請仔細閱讀本手冊，並保留以備日後參考。
要檢視有關進階功能的指示，請造訪 http://www.lg.com 或掃描二維碼下載使用說明書。部份使用
說明的內容有可能與你的產品不同。
ASound Bar
B LED 功能 / 遙控接收器
C 無線重低音揚聲器 — 貼近Sound Bar安裝。
D 外置設備 — （藍光播放機、遊戲機等等）
a 透過光纖線將Sound Bar連接到電視。
b 如果您使用的是外部裝置（例如藍光播放器、遊戲機等），請透過 HDMI 傳輸線將其連接到電視。
c 依照以下順序連接電源：無線重低音揚聲器 [ Sound Bar。接著，開啓Sound Bar：與Sound Bar自動建立連線後，無
線重低音揚聲器的 LED 指示燈亮綠色。
d 與您的電視機配合使用產品
A 反複按下 F 按鈕或按一下 OPTICAL 按鈕，直到光纖 LED 指示燈出現在 LED 指示燈功能上。
B 進入您的電視設定，將輸出揚聲器設為 [光纖]，或 [外置揚聲器]。
e 透過 Bluetooth 將設備連接至您的智能電話
A 輕觸您的智能電話內的設定 按鈕，選擇 Bluetooth。開啟 Bluetooth 功能。（ 關閉 > 開啟）
B 反復按下 F 按鈕，直到 LED 指示燈功能上出現閃爍的 Bluetooth LED 指示燈。
C 在您的智慧手機上查找並選取條形音箱。該產品應顯示為 「LG SQC1 (XX)」。
D 當產品透過 Bluetooth 連線至您的智能手機時，Bluetooth LED 指示燈會亮起。
如果無線重低音揚聲器背面的 LED 指示燈亮紅色，表示Sound Bar未連接到重低音揚聲器。若出現該情況，請依照以下順序進行
連接。
A 按下Sound Bar的電源 按鈕以關閉它。
B 按無線重低音揚聲器背面的 Pairing 按鈕。確認 LED 指示燈是否閃爍綠色。
- 若您仍在無線重低音揚聲器的背面看見紅色 LED 指示燈，請再次長按無線重低音揚聲器背面的該按鈕。
C 按下Sound Bar的電源 按鈕以開啟它。
D 建立連線後，無線重低音揚聲器背面的 LED 指示燈亮綠色。
請將條形音箱、重低音揚聲器放置在離其他裝置（例如無線路由器、微波爐等等）超過 1 公尺的位置，以防止無線干擾。
y設計和規格若有更改，恕不另行通知。
SQC1.DHKGLLK_SIMPLE (Sheet)_MFL71933322.indd 4-6 2023-07-21 3:54:46
Other manuals for SQC1
7
Other LG Speakers System manuals
