LG LAS454B Specification sheet

SIMPLE MANUAL
Wireless
Sound Bar
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
MODEL
LAS454B
www.lg.com
ENGLISH
*mfl69153636*
WARNING: This product contains chemicals known to the
State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the F CC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment and receiver.
yConnect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
yConsult the dealer or an experienced radio/TV technician for help.
CAUTION : Any changes or modications not expressly
approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
FCC WARNING: This equipment may generate or use radio
frequency energy. changes or modications to this equipment
may cause harmful interference unless the modications
are expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an
unauthorized change or modication is made.
FCC RF Radiation Exposure Statement : This equipment
complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20 cm
between the radiator and your body. End users must follow
the specic operating instructions for satisfying RF exposure
compliance. This transmitter must not be co-located
or operating in conjunction with any other antenna or
transmitter.
CAUTION: Regulations of the FCC and FAA prohibit airborne
operation of radio-frequency wireless devices because their signals
could interfere with critical aircraft instruments.
Responsible Party :
LG Electronics USA, Inc. 1000 Sylvan Avenue
Englewood Clis, NJ 07632
TEL. : [phone]
LG Customer Information Center
1-800-243-0000 USA, Consumer
1-888-865-3026 USA, Commercial
Register your product Online!
www.lg.com
Printed in China

Specication
Power
requirements 120 V ~ 60 Hz
Power
consumption
27 W
Networked standby : 0.5 W
(If all network ports are activated.)
Dimensions
(W x H x D)
Approx.
950 mm x 71 mm x 47 mm
(37.4 inch x 2.8 inch x 1.9 inch)
Net Weight Approx. 2.47 kg (5.4 lb)
Amplier
(Total RMS
Output power)
300 W
Design and specications are subject to change without
notice.
Remote control
: Selects sound effect.
: Make comfortable sound at Dolby Digital.
: Adjusts the volume level of subwoofer.
: Automatically turns on by an input source.
How to disconnect the wireless network
connection or the wireless device
Set up the AUTO POWER ON/OFF function to off and
turn off the unit.
Replacement of battery
Additional InformationFront Panel Rear Panel
·······························Power On /Off
·····························Selects Function
·························Adjusts Volume
PORT. IN ············ Connect to a Portable device
OPTICAL IN ··········Connect to an Optical device
aConnect the sound bar to the TV using
Optical cable.
bSet up [External Speaker (Optical)] on
your TV setting menu.
TV
Subwoofer Connection
1TV Connection 2
Place the wireless subwoofer near the sound bar and
follow steps below.
aConnect the power cord of wireless
subwoofer to the outlet.
bTurn on the sound bar :
The sound bar and wireless subwoofer will be
automatically connected. A yellow-green LED
on the wireless subwoofer will light on.
For more information, download the online owner’s manual. http://www.lg.com
Connect with the Sound Bar and TV using
Optical.
If no sound is heard from the wireless suwoofer,
please follow as below.
i. Adjust volume level of the main unit to minimum
by pressing VOL pbutton repeatedly until
standby LED on the main unit blinks slowly.
ii. Press and hold (Mute) button on the remote
control about 3 seconds. The standby LED on the
main unit blinks quickly.
iii. Press and hold PAIRING on the back of wireless
subwoofer for more than 5 seconds using point
of a pen.
iv. Disconnect the power cord of the sound bar and
the wireless subwoofer. Connect them again.