LG Qua tab PX Service manual

MBM65490501(1.0)
All other company names and product names are registered trademarks or trademarks of
respective companies referred to in this manual.
The ® marks and TM marks may be omitted in this manual.
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Imported by: LG Electronics Japan, Inc.
Manufactured by: LG Electronics Inc.
May 2016, 1st Edition
Please read this manual rst
Setting Guide
Thank you for purchasing the "Qua tab PX" (simply called the "product" from
here on).
This "Setting Guide" describes the basic operations and initial settings for
using the product.
For descriptions on various functions, refer to "Basic Manual" or "User Guide 取
扱説明書 詳細版 (Full Instruction Manual)" (Japanese) on the au website
.
Before using the product, be sure to read the "Notes on Usage" to ensure
correct and safe use.
■Basic operations to input characters
This product uses the software keyboard displayed at the bottom of the
screen to enter characters.
Tap the keys on the screen to enter characters.
a
b
c
d
i
《QWERTY》
Switching the keyboard type
《10-key》
《50-key》
ef g h
a Inputs the characters of each key.
b Switches upper case/lower case of entering
character.
c Switches the Input Mode.
Touch and hold → tap [Keyboard type] to switch
to a 10-key keyboard or 50-key keyboard.
d Enters pictograms/symbols/emoticons.
e Switches to voice typing.
f Inputs a space and converts characters in
Hiragana-Kanji input mode.
g Moves the cursor to the right/left and changes
the range of characters when converting
characters.
h Start a new line/conrm the characters input.
i Deletes the character to the left of the cursor.
Flick input
For the 10-key keyboard, you can ick the key up,
down, right, or left to enter a character. Touch
and hold the key to display the candidates that
can be entered by icking (ick guide).
Flick guide
■Basic operations of the keys
Powerkey(side)
●Power ON
Press and hold the power key.
●Power OFF
Press and hold the power key → Select [Power o󱐯]
→ [POWER OFF].
●Sleep mode
Press the power key in operation to switch to
sleep mode.
●Cancel sleep mode
Press the power key in sleep mode to display the lock screen .
Display(Touchpanel)
Directly touch an item or button displayed on the
screen to operate.
Homebutton
Use it to display the Home screen.
Dualwindowbutton
Divides the screen and uses two applications at
one time.
Taskbutton
Check running applications.
Backbutton
Returns to the previous screen.
●Unlocking the screen
Swipe on the lock screen
●Learning the Basic
Operations
Describes the names of parts
and operation.
●Initial Settings
Described in the steps for the
following:
・Language settings,
Accessibility
・Wireless LAN (Wi-Fi®) settings
・Google account settings
・Other settings
●au Easy Setting
Sets au ID and services.
●E-mail Settings
Sets up to use e-mail (@ezweb.
ne.jp).
●Transferring Contacts
You can transfer your contacts
data from your previous au mobile
device.
●How to transfer data from
the au Settings menu
You can restore/backup data
from your previous au mobile
device to this product using
a microSD memory card or au
servers.
●Reducing Battery
Consumption
You can reduce the battery
consumption by setting up
Battery saver.
LearningtheBasicOperations
auEasySetting
■Setting au ID
You can setup convenient au functions and services.
This section describes how to set up an au ID on the initial settings screen that appears when you turn on the power for the rst time.
The settings can be changed with the "au ID Setting" application.
au ID*Register your au phone number or any other character string as an au ID.
au ID password Register password for using au ID.
* The same "au ID" as another user's cannot be registered.
● You can also setup au services on the Home screen by tapping [基本機能 (Basic functions)] → [Settings] → [au Settings Menu] → [au Easy Setting].
1 2 3 4 5 6 7 8
[Next] [Register "au ID"] → [Next] [au IDの設定・保存 (Set and
save au ID)]
Enter the security code →
[OK]
Enter a security password
→ [設定 (Settings)]
[終了 (End)] [Update] → [Next] Conrm the terms of use → [Agree]
→ [Next] → [Agree]
* If you selected [Disagree], the au Easy
Setting Completed screen will appear.
9 10 11 12
To use Lookout for au,
[Activate] → [Next]
* If you do not use it, tap [Skip
activation] → [Next].
* Allowing each authority of
Lookout for au completes the
pre-conguration .
Place checkmarks on the
data you want to restore →
[次へ (Next)]
* If there is no data to be
restored, this screen will not be
displayed.
Place checkmarks on the
application to be installed
→ [次へ (Next)]
[Finish]
* When a di󱐯erent screen from
the above appears, follow the
displayed screen.
InitialSettings:STEP1
■Setting the language, accessibility
This section describes the initial settings screen that appears when you
turn on the power for the rst time.
●Setting the language ●Setting up Accessibility
1 1
[日本語（日本）] → select
language → [→]
* Once you select your desired
language, the language for
the initial settings screen also
changes. From here on, follow the
onscreen instructions.
After switching to the English
display,
[Accessibility] → review the
precautions, [YES] → set
Accessibility → [ ] → [→]
* The operations herein di󱐯er
depending on the congured
Accessibility settings.
InitialSettings:STEP4
■Other settings
1
Check legal documents →
place check marks on "I
agree" and "I agree (Optional)"
→ [DONE]
InitialSettings:STEP3
■Setting up Google account
You can use online services provided by Google, such as Gmail and Google Play, by setting up a Google account.
This section describes how to set up an account on the initial settings screen that appears when you turn on the power for the rst time.
User name Register your Google account (user ID) and the characters that you want to use as your mail address.
You can register a desired name, but a name already registered by another user cannot be set.
Password Register password for the Google account.
12345
[No thanks] → [NEXT]
* To copy the settings of
an Android device to the
product, tap [Copy your
Google Accounts, apps, and
data from your other device].
[Or create a new account]
* If you have a Google account,
enter the mail address.
Enter your rst and last
names → [NEXT] → enter
your user name → [NEXT]
→ enter your password →
[NEXT]
* User names already being used
by another user cannot be used.
Conrm your phone
number → [NEXT] →
[VERIFY]
* When a code input screen
appears, follow the onscreen
instructions.
Conrm the contents →
[I AGREE]
6 7 8 9
[NEXT] Check the details of
Google services →
[NEXT]
[No thanks] → [CONTINUE]
* If you are purchasing
applications from Google
Play, enter payment
information.
Set whether to protect the tablet
* To set the screen lock, place a check mark on "Protect this device and reaquire a PIN,
pattern, or passward to unlock the screen" → [NEXT] → set the unlock method of the
lock screen, etc. → tap [OK].
* If you do not set up, clear the check mark on "Protect this device and reaquire a PIN,
pattern, or passward to unlock the screen" → tap [SKIP] → [SKIP ANYWAY].
InitialSettings:STEP2
■Setting Wireless LAN (Wi-Fi®)
By using the wireless LAN (Wi-Fi®) function, you can access to the
Internet using a wireless LAN environment built in your home or a public
wireless LAN environment away from home.
When setting the wireless LAN (Wi-Fi®) as described in this guide, you
need to be in an environment where the radio waves can be received from
the wireless LAN device or public wireless LAN that you want to access
to.
Check the following information before setting the wireless LAN (Wi-Fi®)
function.
SSID The name set for the wireless LAN device or public
wireless LAN service that you are connecting to
Password The password for connecting to the wireless LAN
device or public wireless LAN service
* Connection to all public wireless LAN services is not guaranteed.
* You may need a separate contract with a service provider to use some
public wireless LAN services.
* Enabling the wireless LAN (Wi-Fi®) function uses a lot of battery power.
We recommend turning o󱐯 the wireless LAN (Wi-Fi®) function when not
using it.
1 2
[ ] of "WI-Fi" → tap
the network that you are
connecting to
* If you do not set up, tap
[NEXT].
Enter Password →
[CONNECT] → conrm the
connection → [NEXT]
* This step is not required if
you select a wireless LAN
(Wi-Fi
®
) network without
security settings.
■How to read the notication panel
When a notication icon appears on the left side of the status bar, slide the
status bar down to open the notication panel to check the notication or
launch the application.
Slide down the status bar The notication panel appears.
■Setting Application Authority
When activating the applications/functions to access the functions or
information of the product for the rst time, the conrmation screen appears
to request the permission for the access authority.
When the conrmation screen appears, conrm the content and tap "DENY"
or "ALLOW".
• The explanation screen may be displayed depending on the application/
function. Also, the conrmation screen may be displayed several times or
the display may be di󱐯erent. Carefully check the displayed content, follow
the onscreen instructions.
• If the application authority is not allowed, applications/functions may not
be activated or using functions may be restricted.
• In this manual, description of the conrmation screens may be omitted.
■Basic operations of the touch panel
The display of the product is a touch panel and you can touch directly with
your nger to operate.
Tap/Double Tap
Lightly touch an icon
or item and then
immediately release
your nger. Tapping
the same place twice
is called a double tap.
Touch and hold
Keep touching the
screen.
Slide
While your nger is
lightly touching the
screen, move it in the
desired direction.
Flick (Swipe)
Quickly move (icking)
your nger up, down,
right, or left.
Pinch
Touch the screen with
two ngers and widen
(pinch-out) or narrow
(pinch-in) the ngers'
distance.
Drag
Keep touching items
or icons and trace to
the desired position.

ReducingBatteryConsumption
■Using Battery Saver
Set up to switch to Battery Saver Mode automatically when the battery is running low.
1 2 3
On the Home screen, [基
本機能 (Basic functions)]
→ [Settings]
[Battery & power saving] [] on "Battery saver"
* Conrm the status such
battery etc. on "BATTERY
INFORMATION".
■Setting Battery saver on timing
1 2 3 4 5
On the Home screen, [基
本機能 (Basic functions)]
→ [Settings]
[Battery & power saving] [Battery saver] [Turn Battery saver on] Tap timing
E-mail (@ezweb.ne.jp) is a service that enables you to exchange e-mails with other cell phones, which support e-mail, and
with PCs. Your e-mail address is decided automatically after the initial settings.
The e-mail address in the initial settings can be changed.
Also, the setting to send/receive e-mails of au cell phones/smartphones by a tablet can be performed.
■Initial Settings
* If the conrmation screen for e-mail application appears, check the content and follow the onscreen instructions.
1234
On the Home screen, [ ] Conrm E-mail address
→ [閉じる (Close)]
Conrm the contents →
[設定する (Set)]/[設定しない
(Not set)]
* If the au ID log in screen
appears, log in with the
au ID of au cell phones/
smartphones .
* When [設定しない (Not set)] is
selected, the initial setting is
complete.
Conrm that it is the
desired mail address → [完
了 (Done)]
* If the mail address is not the
desired one, change it from
[変更 (Change)].
* For details of notes for adding
an account, refer to au
homepage.
■Conrming your e-mail address
1 2
On the E-mail screen,
[] →
[E-mail information]
Your e-mail address appears in the
e-mail address eld.
HowtotransferdatafromtheauSettingsmenu
Return or store data from your previously used au mobile device to this product using a microSD card or the au Smart Pass server.
• You need to setup an au ID to restore or save data using au Smart Pass servers.
• If you use a microSD memory card to restore data, save the data from your previous au mobile device to a microSD memory card.
■How to restore data from the au Settings menu
TransferringContacts
You can transfer data from your previous phone to the product using a microSD memory card.
1Save the
contacts
(address book)
from your
previous phone
to a microSD
memory card, and
insert the card
into the product
Refer to the
instruction manual of
your previous phone,
etc. on how to save
the contacts.
2 3
On the home screen [基本
機能 (Basic functions)] →
[Contacts]
[] → [Manage contacts]
→ [Import]
* When a contact is not
registered, tap [ ] →
[Import] → the import source
to proceed to step 5. If
a saving location screen
appears, select the desired
account or location.
4 5 6
[SD card] → [NEXT]
* If a saving location screen
appears, select the desired
account or location.
Place checkmarks on the
item to be imported →
[IMPORT]
[IMPORT]
* When the import is complete,
"Contacts imported" appears.
12345
On the Home screen, [基本
機能 (Basic functions)] →
[Settings]
[au Settings Menu]
[Data Transfer]
* If the terms of use appears,
check the content and follow
the onscreen instructions.
Select a method for
returning data
* You need to setup an au ID to
restore data using [auスマート
パスのサーバから戻す (Restore
data from au Smart Pass
server)] (data backed up on
au Smart Pass servers).
If you selected [SDカードから復元す
る (Restore data from SD card)],
select your previous au phone model
* This screen is not displayed if you
selected [auスマートパスのサーバから戻
す (Restore data from au Smart Pass
server)] on the restore data method
screen.
6 6
Place checkmarks on the data
you want to restore → [戻す
(Restore)] → [完了 (Done)]
* This screen is displayed if you
selected [スマートフォンのデー
タを戻す (Restore smartphone
data)].
* When a conrmation screen
appears, follow the onscreen
instructions.
Place checkmarks on the
data you want to restore
→ [戻す (Restore)] → [完了
(Done)]
* When a conrmation screen
appears, follow the onscreen
instructions.
■Saving data from au Settings Menu
1 2 3 4
On the Home screen, [基本
機能 (Basic functions)] →
[Settings]
[au Settings Menu]
[Data Transfer]
* If the terms of use appears,
check the content and follow
the onscreen instructions.
Select a saving location
* You need to setup an au ID to
save data from [auスマートパスの
サーバに預ける (Save data to au
Smart Pass server)] (saving data
to au Smart Pass servers).
5 5
Place checkmarks on the
data to be saved, [保存する
(Save)] → [完了 (Done)]
Place checkmarks on
the data to be saved, [預
ける (Save)] → conrm
the details, follow the
instructions on the screen
→ [完了 (Done)]
* When a conrmation screen
appears, follow the onscreen
instructions.
When [SDカードから復元す
る (Restore data from SD
card)] is selected
When [SDカードに保存す
る (Saving to SD card)] is
selected
When [auスマートパスの
サーバから戻す (Restore
data from au Smart Pass
server)] is selected
When [auスマートパスのサー
バに預ける (Save data to
au Smart Pass server)] is
selected
If you want to use the
"Data backup" application to
automatically save your photos
and contacts to the au Smart
Pass server, you can set it up by
following the procedure below.
On the Home screen → [基本機能
(Basic functions)] → [Settings]
→ [au Settings Menu] → [Backup
Setting] → place checkmarks on
the data to be saved
E-mailSettings
■Changing your e-mail address
1234
On the E-mail screen, [ ]
→ [Change Address/Setting
Filter]
[Eメールアドレスの変更へ (To
Change E-mail address)]
Enter the security code →
[送信 (Send)]
Conrm the contents →
[承諾する (I accept)]
5 6 7
Enter e-mail address → [送
信 (Send)]
[OK] [閉じる (Close)]
■PC mail
E-mail ( ) can be used to send/receive e-mail from this product by setting a mail account
that you normally use on your PC.
1●Using PC mail for the rst time
Setup a PC mail account. Activate this application and select
an e-mail provider → enter a PC mail address and password →
[NEXT] → follow the onscreen instructions.
* If you need to manually enter the settings, contact your service
provider or system administrator for the correct PC mail account
settings.
On the Home screen,
[Others Apps] → [Email]
■Gmail
Gmail is a mail service provided by Google. You can send/receive Gmail from this product.
You can also use Gmail from the PC or the browser on the product and share mail
information.
1
On the Home screen,
[Google] → [Gmail]