LG RJP-110WBR User manual

© Copyright 2007, LG Electronics U.S.A., Inc.
RJP-110W Series
Remote Jack Pack
(RJP-110W / RJP-110WBR)
Installation
& Setup Guide
Warranty

2
For Customer Support/Service, please call: 1-888-865-3026
www.lgcommercial.com
206-4061
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK - - USE ONLY INDOORS
ATTENTION:
RISQUE DE CHOCS ÉLECTRIQUE - - POUR INSTALLATION À L¡¯INTÉRIEUR SEULEMENT
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
AVERTISSEMENT:
L’appareil ne doit pas être exposé à des égouttements d’eau ou des éclaboussures et de
plus qu’aucun objet rempli de liquide tel que des vases ne doit être placé sur l’appareil.
REGULATORY INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or more of the follow-
ing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Do not attempt to modify this product in any way (except as noted herein) without written authoriza-
tion from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to oper-
ate this product.
COMPLIANCE:
The responsible party for this product’s compliance is:
LG Electronics U.S.A., Inc., 2000 Millbrook Drive
Lincolnshire, IL 60069, USA • Phone: [phone].
© Copyright 2007, LG Electronics U.S.A., Inc.
Marketed and Distributed in the United States by LG Electronics U.S.A., Inc.
2000 Millbrook Drive, Lincolnshire, IL 60069

Table of Contents
3
206-4061
Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
Installation
Installation in Cabinet Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installer Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 8
End-User Operation
End-User Connections Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
End-User Multi-Media Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
End-User Connectable Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
End-User Audio/Video Input Priorities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Reference: 12-Foot Output Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Accessory Cable: DVI-HDMI Adapter Cable/Strain Relief . . . . . . . . . . . . . . . . . . . . . 14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 - 16
Troubleshooting
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Troubleshooting Flow Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Quick Setup Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
Note: Model Number RJP-110W indicates the black cabinet.
Model Number RJP-110WBR indicates the brown cabinet.

206-4061
4
7 AMP MAXIMUM CURRENT
P
R
E
S
T
O
S
R
E
S
E
T
AUDIO IN
VIDEO IN
AUDIO IN
L R
PC VIDEO IN
DIGITAL VIDEO IN
Overview
The Remote Jack Pack (RJP) contains circuitry to determine the pres-
ence of a signal at each input jack.
(Note: Audio In, Audio In L-R and Video In inputs detect the pres-
ence of the inserted plug, regardless if a signal is present or not.)
When a source is detected, its priority is compared to the priority of
other sources which may be present. If the newly-connected active
source is of higher priority than the existing source(s), the RJP
directs the TV display panel to that source.
Video and audio are monitored and switched independently.
Power is supplied to the RJP by the TV display panel via the control
signal cable.

Introduction
Conveniently installed right in the room where guests will stay, the LG Remote
Jack Pack, (RJP) multi-media interface is available to end-users to connect audio,
video and computer devices to hear and view on the in-room TV display panel.
The RJP can be set up to interface with the TV display panel to show the image
and/or sound from a portable DVD/CD Player, Camcorder, MP-3 Player, Notebook
computer, or portable Video Game Player. Or, devices with digital video output
such as DVD players. If the end-user does not connect any devices, then the in-
room TV display panel will remain on the source selected. When the end-user con-
nects a device, the interface switches the TV display panel to the new source.
Users can recharge laptop or cell phone batteries while watching TV.
The RJP interface is designed to be able to process audio from one source, and
video separately from a different source, if required. (The end-user can work on a
laptop computer while listening to music from an MP-3 player.) However, only
one audio and one video source can be heard/seen at the same time.
The end-user can simply plug the device’s power cord into one of the two conven-
ience AC power outlets provided on the RJP. Then plug in its Audio/Video
cable(s) to the RJP input jack(s) and turn the device on. The RJP completes the
connection between the newly-connected audio and/or video source and the TV
display panel. No end-user menus are involved, all connections are made directly
to the interface.
The RJP continually monitors its source inputs. When a signal is detected, (a
device is plugged into one of the RJP inputs) the interface sends a message to
the TV display panel to switch to the newly-connected source (if the new source
is of higher priority). The interface allows only the higher priority audio and
video to be heard and seen on the TV display panel. The control cable supplies
12 Volt DC power from the TV display panel to operate the interface.
Overview
CLEANING CAUTION:
Since the end-user jack panel is exposed, use extreme caution when
cleaning. Do not use liquid cleaners on the connections panel. Do
not allow liquids to be spilled, sprayed onto or otherwise come into
contact with the connections panel on both the end-user side and
the installer side. Clean with a slightly damp cloth.
7 AMPS MAXIMUM CURRENT TO AC OUTLETS:
The maximum combined total current that is allowable to the AC
power outlets is 7 Amps. These are protected by a circuit breaker
type re-settable fuse.
5
206-4061-A

6206-4061-A
The RJP-110W can only be installed in a vertical position into the
cutout provided in the cabinet front panel. Vertical mount-
ing in the cutout is required so that if liquid is spilled on
the desk top, it will not be able to flow into the RJP. The
RJP must only be installed in the cutout opening. It will
then need to be secured with the four retainer clips, serrated washers
and machine screws provided. The cable wiring assembly and individ-
ual cables will need to be connected to the RJP. Route cable bundle
to avoid damage from chaffing, binding etc.
Note: The connector set that is closest to the mesh sleeving is for
hook up to the TV display panel.
Installation Instructions
1. Remove the cabinet front panel and insert the RJP into the cutout.
2. Install the four L-shaped mounting retainer clips, screws and
serrated washers provided to hold the RJP securely in place. Check
to assure that the RJP is securely mounted.
3. Make all connections to the RJP, see the following page for details.
4. Use self-stick cable supports to relieve strain on connectors at RJP.
5. After attaching cable hardware etc., reinstall front panel on the
cabinet.
Installation in Cabinet Front Panel
CONTROL AUDIO OUT
R L VIDEO OUT RGB OUT DIGITAL VIDEO OUT
CONTROL AUDIO OUT
R L VIDEO OUT RGB OUT DIGITAL VIDEO OUT
CONTROL AUDIO OUT
R L VIDEO OUT RGB OUT DIGITAL VIDEO OUT
CAUTION: The cable wiring assembly should be handled carefully to
avoid damage, as it is routed between display panel and
the RJP. The AC power cord should be plugged into a dedi-
cated and appropriate AC wall power outlet.
CONTROL AUDIO OUT
R L VIDEO OUT RGB OUT DIGITAL VIDEO OUT
Note: The actual appearance of the cable assembly, cabinet, front panel, mounting hardware and cable clamps etc., may
be different than shown in these drawings.
Adhesive-Backed Cable
Bundle Supports
Use adhesive-backed cable
supports. Attach them to
the back and underside of
the cabinet where the
weight of the cable bun-
dle is likely to put strain
on the connectors.

CONTROL AUDIO OUT
R L VIDEO OUT RGB OUT DIGITAL VIDEO OUT
CAUTION: Be sure power is turned off before
attempting to connect the RJP-110W to the TV
display panel and in-room resources.
Installer Connections
AC Power Cord
Connect to 120V 60 Hz AC
power outlet. Supplies
power to the two conven-
ience AC power outlets for
the end-user. (Maximum
combined total current to
both outlets is 7 Amps.)
Control Cable (8-Pin RJ-45)
w/Yellow Protective Sleeve
Connect to RJP port on TV
display panel.
Audio/Video Cables
Connect to Left-Right
Audio/Composite Video
input jacks on TV display
panel.
RGB PC Video Cable
Connect to RGB input on
TV display panel.
Digital Video Cable
Connect to digital video
input on TV display panel.
7
206-4061-A
The RJP-110W and the cables listed below are to be connected to both the TV display
panel and any other entertainment resources available in room.

206-4061-A
8
Installer Connections Contd.
After completing connections between the RJP, the TV display panel and other
resources, be sure the installer menu items have been updated to enable the RJP.
Installer Menu item 040 Auto Camport needs to be set to 000 and 093 RJP
Available needs to be set to 001. (See TV installation guide for complete instruc-
tions on new TV installations.) A brief description of each of the available RJP
connections is provided below.
Digital Video Output
Connect to digital video input on TV display panel to allow the end-user to show
DVD’s high-resolution digital video on the in-room TV.
PC RGB Output
Connect to RGB input on TV display panel to allow the end-user to show a com-
puter/Laptop image on the in-room TV.
Control 8-Pin RJ-45 Output Port
Connect to RJP port on TV display panel for control and power supply for the RJP
multi-media interface.
Left-Right Audio/Video Output Jacks
Connect to Left-Right Audio/composite Video inputs on TV display panel.
AC Power Cord (Installed on RJP)
Connect to standard 120V 60Hz AC power outlet.
(Four 120 Volt 60 Hz AC power outlets are provided for the end user.
However, 7 Amps. is the maximum combined current allowed for the AC
outlets.

The end-user simply plugs a device such as a laptop computer with the appropriate
cables, as shown in the example, into the RJP connection panel. The Remote Jack
Pack senses the new source connection and switches the TV to the newly-connected
source. The device’s sound and image are then presented on the in-room TV display
panel. The TV display panel adjusts automatically to the computer output format.
When the laptop is disconnected, the interface directs the TV to revert back to the
previous source for video and audio. The end-user has several
audio/video connection
options available for con-
necting external devices. The
guest/user can connect a
portable DVD Player, CD
Player, Camcorder, MP-3
Player, Notebook Computer,
Portable Video Game Player,
etc. For added convenience,
two AC power outlets are
also available on the front of
the interface to provide
power for these external
devices and/or recharge lap-
top or cell phone batteries.
(The maximum combined cur-
rent allowed for the AC
power outlets is 7 Amps.)
An end-user could connect
and hear audio from one
device and connect and view
video from a different device.
The RJP offers two different
stereo audio input jacks to
accommodate various end-
user devices. However, only
the higher priority audio
source will be selected and
heard. Similarly, multiple
video inputs are available,
but only the higher priority
video source will be selected
and displayed. (See page 12
input priorities.)
9
206-4061
Typical
In-Room TV
Display Panel
End-User
Connection Panel
®
Today's
Report
Today's
Report
7 AMP MAXIMUM CURRENT
P
R
E
S
T
O
S
R
E
S
E
T
AUDIO IN
VIDEO IN
AUDIO IN
L R
PC VIDEO IN
DIGITAL VIDEO IN
7AMP MAXIMUM CURRENT
P
R
E
S
T
O
S
R
E
S
E
T
AUDIOIN
VIDEOIN
AUDIOIN
L R
PCVIDEO IN
DIGITALVIDEO IN
End-User Connections Overview

10 206-4061
End-User Multi-Media Interface Connections
7 AMP MAXIMUM CURRENT
P
R
E
S
T
O
S
R
E
S
E
T
AUDIO IN
VIDEO IN
AUDIO IN
L R
PC VIDEO IN
DIGITAL VIDEO IN
Reset Switch
Circuit breaker for
AC power outlets.
AC Power Outlets
Two (2) convenience AC
outlets for end-user. (Total
combined current is
7 Amps maximum.)
Audio/Video Input Jacks
Connection for Left-Right
Audio/Composite Video
sources.
PC Video (RGB) Input port
Connection for PC Video.
3.5 mm Stereo Audio
Input Jack
Connection for MP-3 player
or PC audio.
Digital Video Input Port
Connection for digital
video sources. (portable
DVD)
(Note: Audio In, Audio In
L-R and Video In inputs
detect the presence of an
inserted plug, regardless if
a signal is present or not.)

206-4061 11
Examples of devices a guest/end-user
can connect are shown to the right.
There are two AC power outlets avail-
able on the jack pack for added con-
venience.
The End-User Can Connect:
• PC Laptop/Notebook Computers
• Portable Video Game Players
• Portable DVD/CD Players
• Camcorders
• Digital Cameras
• MP-3 Audio Players
End-User Connectable External Source Devices

206-4061-A
12
End-User Audio/Video Input Priorities
End-User Audio/Video Input Priorities
Note: The highest priority is listed first.
Audio Inputs/Sources
1st. 3.5 mm Stereo Audio Jack
2nd. Left - Right Audio Jacks
3rd. Digital Video Audio
4th. TV Display Panel Tuner Audio (Audio Default)
Video Inputs
1st. Digital Video
2nd. PC Video
3rd. Video Composite jack
4th. TV Display Panel Tuner Video (Video Default)

12-Foot Output Cable Assembly
Reference
1.
AUDIO
L-R
2.
VIDEO
4.
RGB 5.
DIGITAL
VIDEO
3.
CONTROL
w/Yellow
Sleeve
Output
Cable
Assembly
is
12.0
Feet
in
Length
AUDIO
L-R
VIDEO
RGB DIGITAL
VIDEO
CONTROL
w/Yellow
Sleeve
Output Cable Assembly Parts List
Item Description
No.
1. Left/Right Audio Cable.
2. Composite Video Cable.
3. RJ-45 Control Cable
w/Yellow Protective Sleeves.
4. RGB Cable.
5. Digital Video Cable.
6. Cable Ties.
.. .. .. ..
.. .. .. ..
.. .. .. ..
6. Cable Tie
Mesh Sleeving
14"
36"
9"
85"
Note: Connector set
near mesh sleeving
hooks up to TV
display panel.
206-4061 13

206-4061
Accessory Cable: DVI to HDMI Adapter Cable
Strain Relief
.....
.....
.....
.....
....
DVI/PC
AUDIO
IN HDMI/DVI
IN
RS-232C
PC IN
UPDATE
DIGTAL
AUDIO
OUT (OPTICAL)
RS-232C
NORMAL
(DTV)
CONTROL
AUDIO IN VIDEO 1 IN
VIDEO 2 IN
AUDIO IN
M.P.I.
ANTENNA
CABLE
RJP
INTERFACE FUTURE
USE
AC IN
Strain Relief for
Accessory HDMI Cable
The weight of the DVI
adapter connection /
cable bundle may put a
strain on the HDMI con-
nection, causing it to
become disconnected
from the TV. Relieve the
weight by attaching a
cable tie in the position
shown.
Note: The actual appear-
ance of the TV etc., may be
different than shown in the
drawing.
Special Connections
Note: DVI to HDMI
Adapter Cable
For TVs equipped with
HDMI, this adapter cable
will be required to connect
the RJP for digital
video/audio.
14
Male
Connector
Female
Connector

Specifications
Application
Makes available to the hotel’s guests, a multi-media interface to the in-room TV display panel and media
resources. Input jacks are provided for external portable devices such as DVD/CD Players, Laptop Computers,
Camcorders, etc.
15
206-4061-A
Installer Connections
Digital Video Out Digital Video Connector
RGB OUT 15-pin RGB PC Monitor Connector
Control Out Control Jack (8-Pin RJ-45)
Video Out 1 Vpp into 75 ohms, Composite or Y+C Combined
Video Jack +/- 1 db @ 4.2 MHz
Audio Out L-R Left - Right Audio Jacks
Max: 1.6 V RMS (1 KHz) @ 600 ohms,
Typ: 250mV RMS @ 600 ohms
Supplied Accessories List
(Cable Assembly) Note: All cables within cable bundle are 12 feet in length.
• Digital Video Cable
• PC Video RGB Cable
• Control Cable (8-Pin RJ-45)
• 1-Set Left-Right Audio/Video Cables
(Attached Cord) • AC Power Cord, 120V 60Hz
(Misc. Hardware) • 5-Retainer Clips, L-Shaped (4-Required)
• 5-Machine Screws w/Serrated Washers (4-Required)
• 4-Self-stick, Nylon-tie Cable Mounting Platforms
• 4-Cable Ties
• 1 Black Cable Tie (DVI to HDMI Adapter Cable see page 14.)
(Separate Cable) • DVI (F) to HDMI (M) Adapter Cable (Optional connection)
Note: Design and specifications are subject to change without prior notice.

206-4061
16
Specifications Contd.
Dimensions Height 2.25 Inches (5.7 cm)
Width 13.75 Inches (34.9 cm)
Depth 3.5 Inches (8.9 cm)
Weight (Approx.) 2.15 Pounds (.975223 kgrms)
End-User Device Inputs
AC Outlets x 2 AC 120V 60Hz (Maximum 7 Amps.
total combined current allowed for AC outlets)
Audio In 3.5mm Stereo Audio Jack
Audio In L-R Left - Right Audio Jacks
(Nom In: 250mV RMS @ 22K ohms)
Overload In: 1.6V RMS Max
Video In Composite Video Jack
1 Vpp, 75 ohms
PC Video In 15-pin RGB PC Monitor Connector
Digital Video In Digital Video Connector
Regulatory UL, FCC Class B, Digital Video Device
Environmental Parameters
Operating Temperature 0°to 40°Degrees Celsius
(32°to 104°Degrees Fahrenheit)
Storage Temperature -20°to 85°Degrees Celsius
(-4°to 185°Degrees Fahrenheit)
Cooling Free Air Convection
Humidity 10% to 90% Non-condensing

Troubleshooting
206-4061 17
Equipment Setup Analysis Notes
• Make sure all connectors and connections are tight and secure on user device, RJP-110W and TV.
• Check to assure user device, RJP-110W and TV are all powered up and working properly and that the TV Installer menu
items are set correctly.
• Audio and Video can be from different sources. Default is TV tuner Audio and Video, if no other audio/video source is
connected.
• Audio source must be viable. The audio output from the customer’s device must be present when connected to be
heard at the TV.
• RJP AC circuit breaker maximum is 7 Amps. If 7 Amp current limit is exceeded, breaker will trip; unplug all accessory
devices from RJP AC outlets and press RESET.
Test Procedures
• Test and connect only one user device to determine if RJP is providing audio/video to TV.
• Test user device on another RJP (perhaps located in a different room) to determine if user device is compatible with
RJP.
• On LCD or Plasma TV, Installer menu items:
040 Auto Camport needs to be disabled by setting it to 000.
093 RJP Available needs to be set to 001 to enable RJP mode..
Following are some possible solutions to problems:
Problem Possible Cause(s) Check RJP, User Device and In-Room TV
No Power • Power not connected?
• Circuit breaker on RJP tripped?
(Unplug all accessory devices from RJP AC outlets, press RESET.)
No Audio • Have all audio connections been made?
• Audio output available?
• Volume level turned up?
• Sound muted?
• TV setup correct for RJP? (Installer menu item 040 is set to 000 and 093 set to 001.)
• Try another RJP.
• Priority level? (Disconnect other devices.)
• Connections made after 040 and 093 menu items set.
(Make connections before adjusting menu items 040 and 093.)
No Video • Video output available?
• All video cables connected?
• TV setup correct for RJP? (Installer menu item 040 is set to 000 and 093 set to 001.)
• Priority level? (Disconnect other devices.)
Poor Video • Check connections. (Video pass-through no user action possible.)

18
Troubleshooting Flow Charts
No
Power
Yes
No
Power
Failure? Restore
Power
RJP
Is power cord
connected
?
Connect
Power
Cord
TV
Is power cord
connected
?
Connect
Power
Cord
TV
Is TV power
turned on
?
Turn
Power
On
Yes
No
No
Yes
RJP
Has Circuit
Breaker
Tripped
?
Remove AC
load, press
RESET
Yes
No
Yes
No
User
Device
Is power cord
connected
?
Connect
Power
Cord
No
Yes
User
Device
Is device
turned On
?
Turn
Power
On
No
Yes
Yes
No
No
Yes
Yes
Yes
RJP
Has Circuit
Breaker
Tripped
?
Yes
No
No
RJP
Are other
audio devices
connected
?
Disconnect
other
Audio devices
No Audio (or
not desired
Audio)
RJP
Is Audio
connected
?
TV
Are
Speakers
turned Off
?
Turn
Speakers
On
Connect
Audio
Cables
TV
Is sound
Muted
or set too
low
?
Press
Volume
Up
No
No
Yes
User
Device
Audio
available &
turned up
?
Turn
Volume
Up
User
Device
Is Audio
connected
?Connect
Yes
No
TV
Is TV
turned
On
?
Turn
TV On
Are
Installer menu
items set up?
No
Remove AC
load, press
RESET
Yes
No
Yes
No
Yes
RJP
Has Circuit
Breaker
Tripped
?
Yes
No
No
RJP
Are other
Video devices
connected
?
Disconnect
other
Video devices
No
User
Device
Is correct
Video output
selected
?
Select
correct Video
output
No
Yes
No Video (or
not desired
Video)
RJP
Is Video
connected
?
TV
Is TV
turned
On
?
Turn
TV On
Connect
Video
Cables
User
Device
Is Video
connected
?Connect
Are
Installer menu
items set up?
Yes
PC
External
Port
Remove AC
load, press
RESET
206-4061

206-4061-A 19
Quick Setup Guide
CONTROL AUDIO OUT
R L VIDEO OUT RGB OUT DIGITAL VIDEO OUT
.....
.....
.....
.....
....
DVI/PC
AUDIO
IN HDMI/DVI
IN
RS-232C
PC IN
UPDATE
DIGTAL
AUDIO
OUT (OPTICAL)
RS-232C
NORMAL
(DTV)
CONTROL
AUDIO IN VIDEO 1 IN
VIDEO 2 IN
AUDIO IN
M.P.I.
ANTENNA
CABLE
RJP
INTERFACE FUTURE
USE
AC IN
RJP-110W Remote Jack Pack (See other side)
• An example of usage would be to have your cell phone and PC computer plugged into
the AC outlets recharging while you listen to a CD player and watch the stock report on TV.
Or, listen to the hotel entertainment network and use your personal PC computer.
• You can connect your portable DVD/CD Player, Camcorder, MP-3 Player, Laptop PC, Video
Game Player or other personal entertainment devices like your cell phone.
®
PC Game
Machine DVD
Player Camcorder MP3
Player
Digital
Camera
1.
2.
3.
Typical TV Display Panel
Installer Menu
Item Description Set
040 Auto Camport 000
093 RJP Available 001
RJP-110W Remote Jack Pack
Hotel Guest Multi-Media Interface
• The LG Remote Jack Pack is provided to connect personal audio, video
and PC devices to hear and view on the in-room TV/display panel.
• As shown on the left, you can connect a portable DVD/CD Player,
Camcorder, MP-3 Player, Laptop PC, Video Game Player and other enter-
tainment devices -- charge your cell phone, laptop etc. and watch TV.
CAUTION: Do not connect hair dryers, clothing irons, coffee makers or
other similar high-current electric devices to the four AC power outlets
provided. The maximum load for all four outlets is 10 Amps.
How to Use the Multi-Media Interface
• Plug your device’s power cord into one of the four AC outlets.
• Connect the device’s audio/video output to the multi-media interface.
• Listen to audio from one device and view video from a different
device. For example you can listen to your MP-3 player while you work
on your laptop PC. The in-room TV plays sound from your MP-3 player
and displays your laptop PC’s image on the TV’s screen. Or, more typically
audio/video from the same device. (See other side for available connec-
tions.)
PC
Game
Machine
DVD
Player
Camcorder
MP3
Player
Digital
Camera
Multi-Media Interface
Quick Reference Guide
Note: All the multi-media connection optionsshown above may not be available at this hotel.
Please check with the hotel to confirm what resources are available.
7AMP MAXIMUM CURRENT
P
R
E
S
T
O
S
R
E
S
E
T
AUDIOIN
VIDEOIN
AUDIOIN
L R
PCVIDEO IN
DIGITALVIDEO IN
Standard
120 Volt
60Hz AC
Power
Outlet
Installer RJP-110W/RJP-110WBR
Quick Setup Reference Guide
Following are the tasks associated
with installing and setting up an
RJP-110W System.
1. Install RJP-110W in cabinet.
2. Make all hard wire connections to
RJP-110W, TV and any other in-room
resources.
3. Plug all system components into
power sources.
4. Adjust TV installer menu items 040
and 093 to enable RJP capability.
(See TV installation guide for com-
plete instructions on new TV
installations. The master TV setup
can be modified to include RJP
settings for multiple system instal-
lations.)
5. Test the system with user-type
devices to assure TV sound/picture
are as desired.
6. Provide user information in
room. (As applicable to your enter-
tainment system.)
• RJP-110W Tent Card. (Or compa-
rable equivalent from Lodge)
• RJP-110W Quick Reference Guide.
(Or comparable equivalent from
Lodge)

LG Electronics U.S.A., Inc.
2000 Millbrook Drive, Lincolnshire, IL 60069 206-4061
Issue-A
Remote Jack Pack Welcome to the LG family! We believe that you will be pleased with your new LG product.
Please read this warranty carefully, it is a “LIMITED WARRANTY” as defined under Federal Law.
This warranty gives you specific legal rights, and you may also have other rights that vary
from state-to-state within the U.S.A.
LG’S RESPONSIBILITY
Service Labor During a period of one year from effective warranty date, LG will replace a defective unit, as
determined by the LG service center, as a result of manufacturing defects.
Replacement New or remanufactured replacements for factory-defective units will be supplied by an LG
authorized service center for one year from effective warranty date. Such replacement unit is
warranted for the remaining portion of the original warranty period.
Warranty Service Warranty service is provided call 1-888-865-3026 for further information.
Not Covered This warranty covers manufacturing defects and does not cover installation, adjustment of
customer controls, installation or repair of antenna systems, cable converters or cable compa-
ny-supplied equipment; it also does not cover damage due to misuse, abuse, negligence, acts
of God or other causes beyond the control of LG. Any alteration of the product after manufac-
ture voids this warranty in its entirety.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICU-
LAR PURPOSE, AND LG SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, OR
INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS IN CONNEC-
TION WITH THIS PRODUCT. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSE-
QUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO
YOU.
OWNER’S RESPONSIBILITY
Effective Warranty begins on the date of installation of the RJP-110W Multi-Media Interface.
Warranty Date For your convenience, keep the dealer’s dated bill of sale or delivery ticket as evidence
of the purchase date.
Installation Read the Installation and Setup Guide carefully so that you will understand the functions of
Guide the RJP-110W and how to make adjustments.
Antenna Reception problems caused by inadequate antenna or faulty antenna connections are the
owner’s responsibility.
Audio Output Audio problems caused by inadequate audio devices or audio material with sound level lapses
are not within the control of LG and therefore are the owner’s responsibility.
Warranty Service For warranty service information, call 1-888-865-3026.
- A replacement unit that is LG’s responsibility (see above) will be provided without charge.
Other service is at the owner’s expense.
- If you have any problem in obtaining satisfactory warranty service, call 1-888-865-3026.
- You must provide the model number, serial number and date of purchase or date of original
installation.
- Before you ask for warranty service, reread this guide. You might avoid a service call.
For Customer Support/Service please call: 1-888-865-3026
www.lgcommercial.com
RJP-110W Warranty