LG 60PM970T User manual

User Guide
This is a 「User Guide」 installed on the TV.
The contents of this guide are subject to change without prior notice for quality
improvement.

GP4
eng
 

Displays information on current programme and / or current time, etc.
✎ Image shown may differ from your TV.
Programme name or external
device name
Detail information on programme
(for digital broadcast)
Current time
14:00 16:30
Sat, 1 Jan 12:02
Prev./Next Pr. Change Schedule

GP4
eng
❐To set favourite programmes
HOME ➾ Settings ➙ SETUP ➙ Programme Edit
1 Move to the desired programme and press Wheel(OK) button. Programme
is selected.
2 Press Set as Favourite.
3 Select the desired Favourite Pr. Group.
4 Select OK. Favourite is set.
❐To use Favourite
HOME ➾ Pr. List
Programme list will appear. Selects the desired preset favourite programme
from Favourite List A to D.

GP4
eng
HOME ➾ Programme Guide
[In Digital Mode Only]
Obtains information about programmes and airing times. Obtains programme in-
formation and schedules viewing / recording.
Press Wheel(OK) button after moving to a
programme of your choice to view or view /
record.
Makes schedule reservation by selecting date / time /
programme. Makes repeat schedule reservation.
[Image shown may differ from your TV.]
After viewing the schedule list, makes
revisions or deletions.
-24H +24H Select schedule
by date Schedule List Favourite Pr. Group
Today 10 Aug. 2011 7:00 1/2 page
FAV
Programme Guide
ALL

GP2
eng
❐Automatically Setting Up Programme
HOME ➾ Settings ➙ SETUP ➙Auto Tuning
Automatically tunes the programmes.
1 Select Country where the TV is used. Programme settings change depending
on the country you choose.
2 Initiate Auto Tuning.
3 Select Input Source of your choice.
4 Set Auto Tuning following screen instructions.
✎If Input Source is not connected properly, programme registration may not
work.
✎Auto Tuning only finds programmes that are currently broadcasting.
✎If Lock System is turned on, a pop-up window will appear asking for
password.

GP2
eng
❌Cable DTV Setting option
When searching for programmes using FULL setting it can take a long time.
The following values are needed in order to search all available programmes
quickly and correctly. The commonly used values are provided as “default”.
Frequency Enter a user-defined frequency.
Symbol rate Speed at which a device such as modem sends symbols to
a programme.
Modulation Loading of audio or video signals onto carrier.
Network ID Unique identifier allocated for each user.
Start Frequency Enter a user-defined start frequency range.
End Frequency Enter a user-defined end frequency range.

GP2
eng
❐Cable DTV Setting
HOME ➾ Settings ➙ SETUP ➙ Cable DTV Setting
[In Cable mode only]
Service Operator
Set Service Operator.
When changing Service Operator, the existing saved
programmes are deleted and Auto Tuning runs.
Channel Auto
Update
• On :You can update information for all the programmes
that can be updated, including the programme currently
being watched.
• Off :You can only update information for the programme
currently being watched.

GP2
eng
✎The range that a user can select from the Service Operator menu differs
depending on number of Service Operator supported by each country.
✎If number of supported Service Operator for each country is 1, corresponding
function becomes inactive.
✎You can not select the Cable DTV Setting when the service operator is set to
“Ziggo”.

GP2
eng
❐To use Manual Tuning
HOME ➾ Settings ➙ SETUP ➙ Manual Tuning
Adjusts programmes manually and saves the results.
For digital broadcasting, signal strength and signal quality can be checked.

GP2
eng
❐To edit programmes
HOME ➾ Settings ➙ SETUP ➙ Programme Edit
Edits the saved programmes.
Set as favourite programme, block/unblock programme, skip programme etc. of
the selected programme.