10
Setting up TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the DD/ EE
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note : In some models up to 200 TV stations can be stored.
Auto programme tuning
All stations that can be received are stored by this method. It is rec-
ommended that you use auto programme during installation of this set.
1. Press the MENU button and then DD/ EEbutton to select the
Station menu.
2. Press the GGbutton and then DD/ EEbutton to select Auto pro-
gramme.
3. Press the GGbutton to display the Auto programme menu.
4. Press the GGbutton. Select a TV system with the DD/ EEbutton
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M : (USA/Korea/Philippines) (option)
5. Press the FFbutton.
6. Press the DD/ EEbutton to select Storage from.
7. Press the GGbutton. Select the beginning programme number
with the FF/ GGbutton or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric ‘0’(or ‘00’) in front of it, i.e. ‘05’(or ‘005’) for 5.
8. Press the OK button.
9. Press the DD/ EEbutton to select Normal or Turbo search.
Option: In some models, you can only select Start.
Note :
a.
Turbo search
is faster than
Normal search
and in some
models, these searches will automatically store all receivable
stations.
b. If the programmed station has poor quality and sound, select
the system again in the
Manual programme
menu.
10. Press the GGbutton to begin auto programming.
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the ‘Programme edit’ section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
