LG VK79103HX User manual

Model
Language ENGLISH +RUSSIAN+Ukrainian+Kazakhstan
Page
Material Size(W*H)
Designer
Designer Confirm
Color(cover/body)
Part No. Description
Date
No. Date
Chage Record
Change content ECO No.
2
3
4
5
6
7
8
9
Weight 100g
2009.07.21
VC68**
36
MFL57903830
1/1
150×220(mm)
zhangdongyue
Owners Manual

OWNER’S MANUAL
РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
ПОСІБНИК ля ВЛАСНИКА
ÏÏààééääààëëààííóóøøûû ””îîëëääààííááààññûû
New Type Cyclone Vacuum Cleaner
Пылесос с циклонным фильтpом нового типа
Новий вакуумний прибиральник циклону типи
ÆÆàà’’àà òò‰‰ððïïààòòòòûû ””‰‰ééûûííääààòò””ûûøø óóààêꇇììää³³ øøàà’’ññîîðð¼¼ûûøø
This information contains important instructions for the safe use and maintenance of the vacuum cleaner.
Especially, please read all of the information on page 4. 5 for your safety.
Please keep this manual in an easily accessible place and refer to it anytime.
Эт инфоpм ция содеpжит в жные инстpукции по безоп сной эксплу т ции и обслужив нию пылесос .
Пpочтите, пож луйст , всю инфоpм цию, д нную н стp ниц х 6 и 7 по вопpос м безоп сности зксплу т ции.
Пож луйст , хp ните н стоящую инстpукцию в удобном месте, чтобы обp титься к ней в любое вpемя.
Ця iнформ цiя мiстить в жливi iнструкцiї для безпечного використ ння i обслуговув ння в куумного прибир льник .
Особливо, чит йте всю iнформ цiю вiдносно сторiнки 8, 9 для в шої безпеки.
Утримуйте це керiвництво в легко доступному мiсцi i посил йтеся н це iнколи.
Á‰ë ”îëäàíáàäà ó£ê‡ìä³ øà’ñîð¼ûøò’ ”àóûïñûç ïàéäàëàíó æ£íå à”àóñûçäû¼ûí ”îð¼àó òóðàëû ìà’ûçäû
ò‡ñí³êòåìåëåð ”àìòûë¼àí.
”àóñûçäû”òû ”îð¼àó °ø°í , ïàéäàëàíóøû 10-áåòòåã³ æ£íå 11-áåòòåã³ ìàçì‰íäàðäû òîëû” î”óû êåðåê.
Äåðêåç³íäå î”ûï òåêñåð³ï ò‰ðó °ø³í ,á‰ë ”îëäàíáàíû àëó¼à ”îëàéëû îðûí¼à ”îéû’ûç.
VK79103HX

MMààççì쉉ííûû

4

6

7

8

9

10

11

12

13

14

54
15

1 2
16

Always hold the steam safety swith during steam cleaning.
•Align the extension pipe (2) and the terminal part of the steam cleaning vacuum tool (3),
and connect the two completely until you hear the “Click”.
If the steam cleaning vacuum tool and the extension are not completely connected, the
nozzle will be pulled out or the steam will not be generated.
• Connect the hose (1) and the extension pipe (2) completely unit you hear the “Click” sound.
• When you press the “STEAM” button (4) on the function control button on the handle part of
the hose (1), the steam will be generated.
Initial steam generation time is about 2.5 minutes and it will take a little longer for the cloth to
get wet. You must operate the “STEAM” button after filling the water.
• When you press the “ STEAM” button (4) one more time or press the “OFF” button (5), the
steam will stop.
CAUTION
To prevent safety accidents during steam cleaning, if you do not press the steam safety
switch with in 30 seconds, the unit will recognize that the cleaning has been completed and
turn off the power. If you want to use the steam again, press the “STEAM” button one more
time.
• During initial steam nozzle operation, it will operate for 180 seconds (3minutes) even
when you do not press the steam safety switch.
•About 2.5 minutes after pressing the “STEAM” button, you can start the cleaning and after
about 3 minutes, you can check the steam with your eyes.
•The cloth can get wet faste depending on how the steam vacuum tool is used and the time.
At this time, when you replace the cloth, you can clean with a dry cloth.
17

To supply water, always unplug the power and put the hose handle on the floor.
And then pour the water into the unit.
• Open the water hole cap of the steam cleaning vacuum tool.
• Use the measuring cup to pour 250cc of water and then close the water hole cap tightly.
When attaching the cloth, you must always turn off the system power.
•After attaching the cloth on the cloth board, install it on the nozzle for steam cleaning.
Be careful because the cloth board can be hot.
•After aligning the vacuum tool with the cloth board, press it from the top.
Connect after you hear the clicking sound. The cloth must be attached on the cloth board
for the vacuum tool and the cloth board to be connected.
18

19
• Connect the carpet and floor nozzle or steam cleaning tool to the extension pipe.
• Operate the function control button to “MAX” or “ MIN” mode.
When the cleaning is completed, press the “OFF” button to operate the cleaner.