LIBERTY AV SOLUTIONS TEAMUP+ Series User manual

www.libav.com 800.530.8998
QUICK GUIDE
TEAMUP+ SERIES 4-PORT
POWERED USB 3.0 HUB W/CONTROL
DL-N5USB-PHUB
V 1.0

2QUICK GUIDE / DL-N5USB-PHUB
The Liberty AV DL-N5USB-PHUB is a commercial-grade, USB 3.0 SuperSpeed, 4 +1 port powered
USB hub designed to expand the capability of your computer, all through a single cable. Add one
dedicated power convenience USB port and interact with up to four USB devices simultaneously
while providing full USB 3.0 charging power (5v 900mA per port). Transfer data and power devices
like web cameras, capture cards, tablets, thumb drives, smart boards, microphones, and other
USB peripherals with ease. The powered USB hub can fully support data transfer rates from
SuperSpeed, Hi-Speed, and Full-Speed USB connections and is fully backward compatible to all USB
2.0 and USB 1.1 hosts. Oering simple control from individual on/o switches at each USB port,
or by scheduling power cycles through the networked web GUI, each route saves the trouble of
unplugging USB devices to power cycle a device, which ensures system uptime.
Featuring a low-prole design, the Liberty AV powered hub can be mounted in various locations,
such as conference tables, display walls, and equipment racks (brackets included). No drivers or
downloads are required for installation; although, connected USB peripherals may require a driver.
All USB 3.0 ports are compatible with USB 2.0 devices—just remember the device will perform only
at a USB 2.0 speed. The powered hub comes with a USB 3.0 cable, industrial-grade aluminum alloy
with ventilation holes with LED indicators, mounting brackets, and an external power supply.
Extension & Ultra-High-Speed Transmission: Instantly grow one USB 3.0 port into four, each
equipped with USB 3.0 backward-compatible technology, capable of data speeds up to 5 Gbps.
Connect multiple USB peripherals to a laptop, including web/PTZ cameras, microphones, capture
cards, etc.
Beeer Power: Provide the necessary current for high-power devices like USB HD cameras. The
four ports share a current output of 4.5A, which ensures a maximum output of 1.5A per USB port!
Remember, a typical laptop USB 3.0 port only provides 900mA.
Smart-Charging Port: In addition to four SuperSpeed USB 3.0 ports, this device includes a smart-
charging port, providing up to 5V 2.4A of power. It’s ideal for charging a device during installation
and providing power to the room tablet to control the AV system afterwards.
Simple Control: Equipped with individual on/o push buttons or a full-blown web GUI for
scheduling and metrics, dictating the state of each USB port couldn’t be easier.
PACKAGE CONTENTS
(x1) Quick
Start Guide
(x1) Power
Adapter
(DC 12 V 3 A)
(x1)
Networked
USB Hub
PRODUCT OVERVIEW
(x2) Mounting
Brackets With
Screws
(x1) USB 3.0
Type-A to Type-B
Cable (L=1.8m)

3
QUICK GUIDE / DL-N5USB-PHUB
PRODUCT BREAKDOWN
1. Female 12V DC Power Port
2. Female USB 3.0 Type B Port: Host PC
3. Female USB Type A: Charging Port
4. Female RJ45 Port: Control
5. Power Button and LED: Host Port
6. Power Button and LED: Charging Port
7. Power Button and LED: Client Ports
8. Female USB 3.0 Type A port: Client
connectivity
4
Panel Description
1 2 3 4
56
7
8
No.
Name
Description
1
12V
Connect to the provided DC 12V power
adapter.
2
USB HOST
Connect to a host PC.
3
USB 2.0 Type-A, charging-only port. It
can be used to charge the devices such
as iPhone and iPad (5V/2.4A (Max)).

4QUICK GUIDE / DL-N5USB-PHUB
INSTALLATION
1. Plug the included AC power adapter into the power jack at the rear of the
USB hub and an electrical outlet.
2. Plug the provided USB cable into the Host port of the device.
3. Plug the other end of the cable into your computer's port.
4. Connect USB devices or hubs to the USB hub’s downstream 1 ~ 4 Client ports.
5. Make sure the power buttons are in the ON position for devices that you want to be accessed.
6. Use the optional mounting brackets where necessary.
APPLICATION DIAGRAM

5
QUICK GUIDE / DL-N5USB-PHUB
MAINTENANCE AND TROUBLESHOOTING
No power
• Check if the power adapter is normal, and ensure the provided power adapter is used.
• Press the power button to see if the device can be powered on.
LED corresponding to USB port is o
Check to see if the port is closed, and press the corresponding button to open it.
LED 4 (and other LEDs) are o when it is connected to a USB device
It exceeds the power supply capability of the device after this USB device is connected. Please reduce
the quantity of USB devices or remove the high-power USB device.
The inserted USB device can’t be recognized
Please hold the corresponding ON/OFF Power button down for about 3 seconds to close the port and
then press it to open the port again.
USB 2.0 port can’t be connected to U disk or other USB devices
The USB 2.0 port is a charging-only port and does not support data transmission. It can charge devices
such as an tablet or phone.

6QUICK GUIDE / DL-N5USB-PHUB
API COMMANDS
First Steps
Establish a connection with USB hub through a TELENT session.
IP: The unit’s assigned IP address. Default is 192.168.1.254
*Port number: If required, port number is 23 by default.
Establishing Commands
[SET USB PORT] denotes command key words, case
[prm prm1] denotes parameters and is case insensitive
<CR><LF denotes a carriage return or a line feed; all commands must be ended
with a carriage return or a line feed.
Description Command Example
Power ON/OFF USB Port Command:
SET USB PORT prm prm1 <CR><LF>
Return:
USB PORT prm prm1 <CR><LF>
Parameter:
prm = {1, 2, 3, 4, 5, all}; 1~4: USB3.0 ports
5: USB2.0 charging port prm1 = {on, o}
default: on
Command:
SET USB PORT 1 ON
<CR><LF>
Return:
USB PORT 1 ON <CR><LF>
Description:
Set USB port 1 TO ON
Request USB Status Command:
GET USB PORT prm <CR><LF>
Return:
USB PORT prm prm1 <CR><LF>
Parameter:
prm = {1, 2, 3, 4, 5, all}; 1~4: USB3.0 port 5:
USB2.0 charging port prm1 = {on, o}
Command:
GET USB PORT
1<CR><LF>
Return:
USB PORT 1 ON <CR><LF>
Request USB port’s
Power Status
Command:
GET USB PORT prm prm1 <CR><LF>
Return:
USB PORT prm prm1 value <CR><LF>
Parameter:
prm = {1, 2, 3, 4, 5}; 1~4: USB3.0 port 5:
USB2.0 charging port prm1 = {U, I, W, ALL}
Voltage, current, power, all prm2 = {xxxx}
The corresponding value, retain 2
signicant digits
Command:
GET USB PORT 1
U<CR><LF>
Return:
USB PORT 1 U
2.4V<CR><LF>

7
QUICK GUIDE / DL-N5USB-PHUB
API COMMANDS CONTINUED
Description Command Example
Reboot any USB port Command:
REBOOT USB prm <CR><LF>
Return:
REBOOT USB prm<CR><LF> prm = {1, 2, 3,
4, 5}; 1~4: USB3.0 Port 5: USB2.0 charging
port
Command:
REBOOT USB 2<CR><LF>
Return:
REBOOT USB 2 <CR><LF>
System reboot Command:
REBOOT<CR><LF>
Return:
REBOOT<CR><LF>
Command:
REBOOT<CR><LF>
Return:
REBOOT<CR><LF>
System reset Command:
RESET<CR><LF>
Return:
RESET<CR><LF> Description: System reset
Command:
RESET<CR><LF>
Return:
RESET<CR><LF>

8QUICK GUIDE / DL-N5USB-PHUB
MAINTENANCE AND TROUBLESHOOTING
Maintenance
• If the USB hub has been powered on for a long period of me, please reseat the power adapter.
• When cleaning the USB hub, disconnect all connecons, including power. Please use a dry, so cloth
to wipe down. If the dirt is substanal, gently clean using a neutral cleanser. Do not use a strong or
corrosive detergent.
Avoid
• Low-cost, uncered USB cables.
• Spilling liquid on the USB hub.
Troubleshoong
• Computer soware doesn’t detect the connected USB peripherals when connected to the hub:
Step 1: Make sure that any other applicaons that are using said peripheral(s) are fully
closed.
Step 2: Within the soware of your choice, make sure you have selected the device under
“audio & video sengs”.
Step 3: Make sure the USB drivers on your computer are up to date.
• Computer hardware doesn’t detect the USB hub:
Step 1: Make sure the on/o switch of the power port is turned on.
Step 2: Reconnect the hub’s USB cable to your computer and try a dierent USB port
if available.
Step 2: Restart your computer.
Addional Informaon
The actual power provided to each USB device and port is based on typical USB standards. Otherwise, the power
sent to the connected devices may become intermient or disconnected.
For typical power reference, the below devices are oen rated as follows:
Mouse: 100mA
Keyboard: Max. 500mA
USB 2.0 Web Camera: 480mA
USB 2.0 Microphone: 480mA
Portable Hard Disk: Max. 500mA
USB 3.0 Portable Hard Disk: Max. 900mA
*Please double-check the specic rang of your devices before connecng into the Liberty networked hub.

9
QUICK GUIDE / DL-N5USB-PHUB
MAINTENANCE AND TROUBLESHOOTING TECHNICAL SPECIFICATIONS
USB Hub
Case Material Industrial-grade metal chassis with metal brackets
Supported Transfer Rates Transfer rate of 5Gbps/1.5/12/480 Mbps
Power Protecon Over current, over voltage, short circuit protecon
USB Specicaons Fully compable with USB 2.0/3.0/1.0 specicaon.
Fully backwards compable with USB 2.0/1.1 specicaon.
LED Indicator 6x Blue LED: Status for USB peripheral or power
Features
Operang System Windows®7 (1080p and under only), Windows 8.1, Windows 10 or
higher MacOS™ 10.10 or higher Google™ Chromebook™ Version
29.0.1547.70 or higher Linux
USB Charging Protocol Supports USB-IF Rev1.2 and BC 1.2
USB Communicaon Protocol UVC 1.1
Control Methods Front panel buttons, web UI, Telnet API
Input/Output Interface
USB Interface 1x USB-B 3.0 upstream port, 4 x USB-A 3.0 downstream ports,
1 x USB-A 2.0 charging port
Support on Upstream Port SuperSpeed (SS), HighSpeed (HS) and FullSpeed (FS) trac.
Note: Transfer rates are device and USB host controller
dependent
Support on Downstream Ports SuperSpeed (SS), HighSpeed (HS), FullSpeed (FS) and LowSpeed (LS)
trac
Control 1x RJ45 LAN Port
Physical Parameter
Power Input DC 12V/3A, 36W
Power 110-240V
USB 3.0 Port Max Power Output 5V/1.5A per USB port, up to 15’ from device
USB 2.0 Port Max Power Output 5V/2.4A intended for charging only
Dimension (WxHxD) 140mm x 23mm x 90.2 (5.51" x 0.91" x 3.55")
Net Weight 0.31kg (0.68lb)
Cercaon CE, FCC, RoHS

10 QUICK GUIDE / DL-N5USB-PHUB
Thank you for your purchase.
For technical support please call our
toll-free number at 800-530-8998
or email us at [email protected]
www.libav.com 800-530-8998