Liberty DL-1UC1A-WPKT-W User manual

www.libav.com 800.530.8998
USER MANUAL
DL-1UC1A-WPKT-W Owners Manual
Digitalinx Series USB-C Wall Plate Extension Set.
70M 4K Single gang Decora USB-C wall plate extends AV up to 4K and USB2.0 High
Speed data.

Rev 222609 OWNERS MANUAL DL-1UC1A-WPKT-W
The Digitalinx DL-1UC1A-WPKT-W HDBaseT 2.0 extender set transmits video, audio, USB High Speed
Data (up to 190Mbps) from a single USB-C connected source and RS232 over single category 6 F/UTP
or better twisted pair cable converting the AV to HDMI at the receiver. The DL-1UC1A-WPKT-W can
transmit 4K resolutions up to 4K@60Hz, 4:2:0 up to 40m / 131’ and 1080P up to 70m / 230’. The audio
circuit is completely separate and is not dependent on the USB-C input source to be active. The wall
plate transmitter and receiver each include a 2 port USB-A hub allowing for easy USB expansion and
connection of other peripherals such as a camera, touch screen, microphone, or others to the
connected source / host device over a single USB-C cable. The Digitalinx DL-1UC1A-WPKT-W is HDMI
1.4b and HDCP 2.2 compliant and supports CEC pass through.The Digitalinx DL-1UC1A-WPKT-W
supports multiple audio formats including Dolby Digital,DTS,LPCM.
The DL-1UC1A-WPKT-W HDBaseT receiver powers wall plate transmitter via HDBaseT so there is no
need for an external power supply for the wall plate. The DL-1UC1A-WPKT-W does have an optional
USB-C charge port that only provides power to the main USB-C port. This port works by using the
connected devices charger. When the charger is connected, the chargers power up to 65w will be
injected into the USB-C AV/Data port allowing the connected device to remain charged while in use.
The DL-1UC1A-WPKT-W has an EDID Dipswitch to allow EDID selection.
The DL-1UC1A-WPKT-W is sold only as a set. The individual transmitter and receiverare not
compatible with other HDBaseT devices due to proprietary PoE circuitry.
PACKAGE CONTENTS
PRODUCT OVERVIEW
• DL-1UC1A-WPKT-W Wall plate extender set
• (2) Phoenix Connector
• (2) Mounting Ears with Mounting Screws
• 24V 1A Power Adapter with US, UK, AU AND EU Power Adapters

3
OWNERS MANUAL DL-1UC1A-WPKT-W
WALL PLATE PRODUCT BREAKDOWN
FRONT REAR
3
1
2
4
5
6
7
8
1. Power LED (Red) : When the transmitter is powered on, the red Power LED is on.
2. Link LED (Green) : When the transmitter and receiver have a good connection. The green
LINK LED is on.
3. HUB ports : Two USB-A ports for connecting USB2.0 devices. Each USB-A port will provide
power up to 5V/500mA.
4. USB-C : For connecting a PC / Laptop
5. USB-C charging port : For connecting a power adapter. The port will provide a max of
65W of power to USB-C source device.
6. Audio in : 3.5 mm Analog audio source input port.
7. HDBaseT out : HDBT signal output port.
8. RS232 : Serial port for transmitting / receiving RS232 signals

Rev 222609 OWNERS MANUAL DL-1UC1A-WPKT-W
RECEIVER PRODUCT BREAKDOWN
12 3 4 5
67 8 9 10 11 12
FRONT
REAR
1. Power LED (Red) : The receiver is powered on, when red Power LED is on.
2. Link LED (Green) : When the transmitter and receiver have a good connection, the green
link LED is on.
3. HDCP LED (Green) : O = No video signal.
Solid = Video with HDCP content.
Flashing= Video signal with no HDCP content.
4. FW LED (Green) : Valens chip is running.
5. EDID DIP switch : See next page for settings
6. Micro USB : Firmware port
7. HDBaseT in : HDBT signal output port.
8. HDMI OUT : For connecting Display / Projector
9. USB HUB : USB A Female ports. Each Port will provide 5V 500mA for USB devices. USB
bandwidth is limited to 190mbs
10. Audio out : 3.5mm Analog audio jack. Pass through from wall plate 3.5mm audio jack
11. RS232 : Phoenix connector. pass through from wall plate.
12. Power Port : DC 24v

5
OWNERS MANUAL DL-1UC1A-WPKT-W
CONFIGURATION SETTINGS
Below is an example showing extender set in a typical application.
APPLICATION DIAGRAM
DIP SWITCH EDID MODE
1 is down and 2 is down Copy display's EDID (factory default)
1 is down and 2 is up 4K 30 4:4:4
1 is up and 2 is down 1080p60 4:4:4
1 is up and 2 is up 1200p60 4:4:4

Rev 222609 OWNERS MANUAL DL-1UC1A-WPKT-W
TECHNICAL SPECIFICATIONS
Model DL-1UC1A-WPKT-W
Physical Parameter
Case Material Receiver: Industrial-grade metal chassis with metal brackets
Transmier: Plasc with metal
Dimensions Transmier: 37mm [W] x 64mm [D] x 105mm [H]
Receiver: 140mm [W] x 75mm [D] x 23mm [H]
Weight Transmier: 191g
Receiver: 300g
Power Protecon ESD protecon with human body model — ±8kV (Air-gap discharge) & ±4kV
(Contact discharge)
Power Output DC 24V 1A
Power Input AC 100-240V 50/69Hz
Power Consumpon 17.28W (Max)
Operang Temperature 32 - 104°F / 0 - 40°C
HDMI Specicaons
HDMI 1.4b
HDCP 2.2/1.4
Video Bandwidth 10.2 Gbps
Video Resoluons 4096×2160@24/25/30/50/60Hz,3840×2160@24/25/
30/50/60Hz, 2048x1080p,[email protected]/24/25/29.97/
30/50/59.94/60Hz,1080i@50/59.94/60Hz, 720p@50/
59.94/60Hz, 576p, 576i, 480p, 480i
Color Space RGB, YCbCr 4:4:4 / 4:2:2. YUV 4:2:0
Color Depth 8/10/12-bit
Analog Audio Format LPCM 2.0
HDMI & USB-C
Audio Formats
LPCM, Dolby Digital/Plus/EX, Dolby True HD,
DTS, DTS-EX, DTS-96/24, DTS High Res,
DTS-HD Master Audio, DSD
Connecvity
Inputs Inputs: 2x USB HUB [Type A, 4-pin female]
1x USB-C
1x Analog Audio [3.5mm audio jack]
Rx : 1xHDBT IN [RJ45, Female]
Outputs Outputs: 1x HDBT OUT [RJ45, 8-pin female]
1x USB-C (only for charging)
1x RS-232 Phoenix jack 3 pin (3.81mm)
Rx: 1xHDMI Type A -Female
1x Audio Out [3.5mm]
2x USB A
1x RS-232 Phoenix jack 3 pin (3.81mm)
1x Micro USB (Firmware)
Transmission
Max Distance (1080P) 230 / 70m over CAT6/6a/7
Max Distance (UHD/4K) 131 / 40m over CAT6/6a/7

7
OWNERS MANUAL DL-1UC1A-WPKT-W
Thank you for your purchase.
For technical support please call our
toll-free number at 800-530-8998
or email us at [email protected]
www.libav.com 800-530-8998