Lifegoods 8719632955733 User manual

USER MANUAL
Bluetooth Carkit
Please read these instructions before use, to prevent any
damage with your new LifeGoods product.

2
Thank you for choosing our LifeGoods product! To ensure proper and
safe functioning of the product, please read the manual carefully
before use. Please always follow these instructions for safe usage.
If you have any questions about the product or experience any
problems, please contact us by email: [e-mail].
About
1
Features
2
Input voltage: 12/24V
●Car charger function.Two USB port, total output 5V/3.1A
●5V/3.1A USB port with intelligent quick charge identify IC
●Supports USB reading/TF card
●Display shows frequency and numbers
●Frequency : 87.5-108.0 MHz
●Support WMA/MP3 format songs
●Support A2DP music playing
●Support hands free function, with MIC inside
●Car battery voltage display
●Operation and condition voice prompt
-
-
-
-
-
-
-
-
-
-
-

3
Operation Guiding
3
Plug the FMT into the car cigarette lighter hole to power on.
Car battery voltage display function starts working, the display will
show and with voice
prompt : car battery voltage normal /abnormal.
Then FMT will display BT , with a voice : Bluetooth is ready to pair, and
display will switch
from BT to frequency alternately until you connect with Bluetooth or
insert USB / TF card.
To use FMT music playing function, turn on the car FM radio , choose
a clean channel, make
sure the car radio channel is clean to avoid interference by local radio
signal.
Adjust the FM transmitting frequency to match the car radio FM
channel.
Insert the USB or TF card, FMT will start to play automatically.
Handsfree button.
1.
2.
3.
4.
5.
6.
7.

4
Voltage detection function
4
For 12V car, when the voltage is under 11.5V or higher than 14.9V, it
means a car battery issue.
For 24V car, when the voltage is under 23.1V or higher than 27.3V, it
means a car battery issue.
If your car battery has some voltage problem, you should nd
professional car service to examine
your car battery.
-
-
-
Bluetooth connection
5
Power on the FMT rst, after shows the car battery voltage , there is a
prompt voice :“Bluetooth is ready to pair”.
Turn on your smart phone Bluetooth, search the FMT with the device
name HY82.
After connected, there is a prompt voice:” Bluetooth connected
successfully”.
Then you can use Bluetooth function to play music from your smart
phone or answer a call with hands free.
-
-
-
-
Hands-free function guiding
6
After connect your smart phone to the BT FMT device:
Answer the call : short press to answer incoming call.
Reject the call : long press to hang up the incoming call
Hang up : on calling or dialing state , short press to hang up
Recall : short and quick press twice to recall the number
which call in/out at last time.
-
-
-
-
-

5
Car charging function
7
There are two USB port for charging: 5V/3.1A and 5V/1A
● 5V/3.1A port: Max output is 5V/3.1A , mainly for device which needs
big input current.
●
5V/1A port: Needs fast charging cable (which without data transfer
function) for small input current needs devices like digital camera,
functional cell phone, MP3 player etc.
-
-
Music playing function guiding
8
Please kindly noted that for this device , priority play sequence is Bluetooth.
Press ●●to previous song, press ●●to play next song.
Use the button to adjust the volume by turning counterclockwise to
decrease the volume, or clockwise to increase the volume.
Press button to pause playing , re-press to resume playing
Long press button to enter into frequency adjustment mode, display
is shining , under this model you can switch the folder :
a. short press to enter into previous folder with display ” -F”.
b. short press ●●to enter into next folder with display “F-”.
Long press ●● to switch playing from Bluetooth A2DP to TF card or
USB
Long press ●● to enter into display the car battery voltage mode
1.
2.
3.
4.
5.
6.
DRM Software Review