lifelong LLMG800 User manual

MIXER
GRINDER
Built for Taste. Built for India.
User Manual
Manufactured for & Marketed by :
Lifelong Online Retail Private Limited
For queries and complaints:
please contact: [email protected]
www.lifelongindiaonline.com

INTRODUCTION:
Dear Customer,
Congratulations! We welcome you to the Lifelong family, as you welcome our
Lifelong Mixer Grinder to be a part of your home.
At Lifelong, our products are carefully built for the needs of India, which is why
we have crafted a diverse range of innovative products, across a spectrum of
categories - Home, Kitchen, Grooming, Fitness, Lifestyle and Smart Home, to better
help you. We then deliver them at the best prices, enriching your everyday living.
We are sure you can't wait to start using your new Lifelong Mixer Grinder.
We know we can't!
Looking forward to building our bond for life, cheers!
Thank you, Team Lifelong
12
LLMG800 LLMG600

TABLE OF CONTENTS :
1. About the Product
2. Marking of Product
3. Dos and Don’ts
4. How to use
5. Overload protection
6. Device Cleaning
7. Specifications
8. Troubleshoot Chart
9. Terms & Conditions
10. Warranty Card
ABOUT THE PRODUCT:
3
Take your culinary skills to a different level with the Lifelong Mixer Grinder. It is a durable
kitchen appliance that comes with three convenient jars for everyday usage. Made with
high-quality materials the jar and the blades are resistant to corrosion. This enables you
to blend ingredients of varying textures effortlessly. Its efficient stainless-steel blades
help to cut the toughest ingredients and gives the finest paste and smoothest shakes
and purees for daily cooking, especially for smooth grinding preparation of chutneys,
dips, masalas and pastes, and its strong ABS body gives durability & reliability to the
product which will last long in the Kitchen.
4

6
5
DOS AND DON’TS:
• Keep the Mixer Grinder away from heat and sunlight.
• Clean the jars carefully before use.
• Do not place the machine on a wet surface.
• Never try to touch the moving parts or blades of the mixer grinder while
operation.
• Never insert your hand or spatula or spoon, when in use
• Never operate the mixer grinder without the jar lid.
• The jars can be cleaned by using regular dishwashing soap.
• After thoroughly rinsing with soap, clean the jars with a dry cloth.
• Never store the jars with closed lids.
• Do not use any detergent soap solutions on the main body.
• Clean the body with a dry cloth before storing for next use.
• Never immerse the motor in the water for cleaning.
• Never pull the cord to take out the plug from the socket.
• Always switch off the power supply button before cleaning, emptying or
when not in use.
• Do not use the Liquidizer jar for dry/wet grinding, grating, chopping or
mincing functions.
MARKING OF PRODUCT:
(A)
(B)
(C)
(F)
(G)
(D)
(E)
(H)
(I)
(A)
(B)
(C)
(F)
(G)
(D)
(E)
(H)
(I)
a. Jar lid
b. Jar handle
c. Top socket
d. Liquidizing jar
e. Motor unit
f. Overload protector (at the bottom)
g. 3 Speed control knob with incher
h. Chutney jar
i. Grinding jar

78
OVERLOAD PROTECTION:
WET/DRY GRINDING
STEP 1: The wet /dry grinding jar is used for grinding items like ldli and Dosa batter,
coconut chutney, groundnut, red chili powder, sugar, vegetables, etc.
STEP 2: Make sure that the dry grinding jar is absolutely clean and dry before use.
STEP 3: Use small pieces of ingredients for grinding.
STEP 4: Fill the jar with ingredients up to the marked capacity.
STEP 5: Put the flat lid on top of the Jar. Grind at low speed for 15-30 seconds and
then move to higher speed .
Note: Always move gradually from lower speeds to the higher speed. During the
grinding process, as the jar might pop up due to friction. Do not panic. This
happens gradually.
CHUTNEY MAKING
STEP 1: The chutney jar is mainly used for making chutney.
STEP 2: Use small pieces of ingredients for grinding.
Step 3: Put the ingredients in the chutney jar for grinding.
Hold the lid tightly so that it doesn't pop up.
STEP 4: The ingredients should not be too large.
Break ingredients into smaller pieces.
Note: The lid should be properly pressed.
• The overload protector is designed to protect the motor from burning.
• In case of an overload, the blade of the jar stops rotating and the motor
gets jammed or starts heating up.
• If such a situation occurs the mixer grinder will automatically trip off and
hence protect the motor.
• Let the motor cool down for a couple of minutes. The red button of the
overload protector switch located at the bottom of the mixer grinder has to
be pressed for re-operation.
• If you have to reset the overload protector again and again, try reducing the
quantity of ingredients in the jar.
• Keep the Mixer Grinder away from heat and sunlight.
• Clean the jars carefully before use.
• Do not place the machine on a wet surface.
• Never try to touch the moving parts or blades of the mixer grinder while
operation.
• Never insert your hand or spatula or spoon, when in use
• Never operate the mixer grinder without the jar lid.
• The jars can be cleaned by using regular dishwashing soap.
• After thoroughly rinsing with soap, clean the jars with a dry cloth.
• Never store the jars with closed lids.
• Do not use any detergent soap solutions on the main body.
• Clean the body with a dry cloth before storing for next use.
• Never immerse the motor in the water for cleaning.
• Never pull the cord to take out the plug from the socket.
• Always switch off the power supply button before cleaning, emptying or
when not in use.
• Do not use the Liquidizer jar for dry/wet grinding, grating, chopping or
mincing functions.
LIQUIDIZING AND BLENDING
STEP 1: The Liquidizing and blending jar is used for preparation of shakes,
juices etc.
STEP 2: Before starting the mixer grinder for the first time or after a long
period of time, rotate the motor shaft with hand to ensure that it turns freely
and smoothly.
STEP 3: Place all the ingredients in the jar and close the lid properly
STEP 4: Now switch on the grinder for operation.
HOW TO USE:
Note: Do not use this jar for wet grinding.

9 10
DEVICE CLEANING: TROUBLESHOOT CHART:
• Before use pour warm water in the jar, run for a few seconds and throw away
the water.
• The cleaning of the mixer grinder and jars are very necessary for maintaining
smooth operation of the mixer grinder and proper hygiene.
• After you have used the mixer grinder, use warm water to remove the smell
of the material from the jars and then rinse under running water.
• In order to clean the blades thoroughly, remove the blades by using the spatula
to loosen the screw by twisting the dome nut on the blade clockwise, while holding
the coupler from under the jar.
S.No Problem Cause Action Remark
1
2
3
The Mixer grinder
does not start.
The result/
performance
is not satisfactory.
Mixer grinder
generates
abnormal noise.
Jar is not locked
properly.
Blade assembly
loose.
Coupler loose.
Lock the jar properly.
Tighten nut of blade assembly
properly.
Tighten coupler.
Fill the chutney jar to the level of the
blades & the other 2 jars up to 2/3rd of
the capacity level Indicated.
Cut/brake down the ingredients to
be ground into appropriate size.
Ensure that the power supply is off.
Remove excess load & reset the
OLP located at the bottom of the
mixer grinder.
If it still does not
work, please
contact Lifelong
customer care
center.
Size of the
ingredients do not
fit in the jar.
No power supply
tripped due to
overload.
SPECIFICATIONS:
S. No.
1
2
3
4
5
6
7
8
9
Specification
Wattage
Warranty
Power Supply
Speed Control Switch
Overload Protection (OLP)
No. of Jars
Body Material
Jar Material
Blade Material
600 W
LLMG600 LLMG800
2 Years
220-240 V, 50 Hz
Yes
Yes
3
ABS
Stainless Steel
Stainless Steel
750 W
2 Years
220-240 V, 50 Hz
Yes
Yes
3
ABS
Stainless Steel
Stainless Steel

11 12
Consumer Warranty Card
Dear Customer,
Thank you for choosing a Lifelong consumer product. All Lifelong Consumer products
are designed and manufactured to the highest standards to deliver high quality
performance, as well as easy installation and use. At Lifelong, we believe in
providing not only service, but adding value to your purchase. The warranty has
therefore been designed especially for you with your interest at heart.
Warranty Service
All Lifelong consumer products are covered against manufacturing defects from them
date of purchase.
Name of the product:
Model:
Warranty coverage: 2 years
Please note: Purchase receipt is necessary for warranty verification.
Customer Care: [email protected]
Customer Details
Name:
Address:
Home Number:
Office Number:
E-mail Address:
Product Details
Model No.:
Serial No.:
Purchase Date:
Invoice Number:
Online Site:
Please log on to www.lifelongindiaonline.com and complete the online warranty form with your
personal and product details within 14 days.
Terms and Conditions:
1.This warranty is void if:
a. The completely filled warranty card is not presented
at the time of servicing the product.
b. The product is not operated according to the
instructions given under the user manual.
C. Damages are caused by lightning, abnormal
voltage, water or other liquid intrusion, fire, flood,
accident, negligence or improper handling.
d. Product has been damaged due to installation,
repairs, alterations or modifications by unauthorized
service organizations or persons.
e. Product label specifying the model number, serial
number and production code has been removed
and altered.
f. Defects or parts requiring replacement due to
ordinary wear and tear, corrosion, rust or stains,
scratches, dents on the casing or paintwork of the
product.
g. Claims damaged and/or missing parts
(accessories) after 7 days from the original date of
goods received.
h. Defects or faults in product which have been used
for commercial/industrial purposes or which have
been rented/leased or have been otherwise subject
to non-household/non-domestic use.
2. Repairs or replacements will be carried out by
authorized service provider.
3. During the limited warranty period, Lifelong or its
authorized service provider will repair without charge
the defective unit inclusive of labor and parts and
restore the unit to its optimum working condition. All
defective parts used for the warranty repair should be
surrendered to Lifelong and/or its authorised servicer.
4. All expenses incurred in collecting the unit (s) or
part(s) thereof from authorised service provider as
will as any other expenses and incidentals will be
5. Lifelong obligations are limited to the repair and
replacement of the defective product. Except as set
forth above, there are no other express or implied
warranty and all warrantied, conditions or other terms
implied by statute or common law (including any
warranty of satisfactory quality, merchantability or
fitness for a particular purpose) are excluded to the
fullest extent permitted by the lass.
6. Lifelong total liability for damages relating to or arising
out of the purchase or use of the product regardless of
the type or cause of such damage of the form of
characterization of the claim asserted (e.g. contract or
tort) shall not exceed the original purchase price paid
for the product.
7. However in no event shall Lifelong and Lifelong
authorized distributors be liable for any punitive, special
incidental, indirect or consequential losses or damages
whatsoever (including without limitation, damages for
the loss of revenue, business, profits, goodwill, or
contracts, business interruptions, loss of business
information or any other pecuniary loss.) Whether or
not Lifelong has been advised of the possibility of such
damages.These limitations shall apply not with
standing the failure of the essential purpose of any
limited warranty. This limited warranty does not affect
consumer's statutory rights under the law.
8. No carrier, dealer or employee is thereof authorized to
make modifications to this warranty and you should not
reply on any such representation. Lifelong reserves the
right to amend the terms and conditions if necessary.