
9
Upper blades (movable)
Bottom blades (xed)
Clean off hair scraps
with cleaning brushes
Drop oil here. This place where upper
blades and bottom ones move back and
forth.
a couple of drops in 5 places
After dropping oil, press on cutter
frames and move them back and forth,
which is to lubricate blades evenly.
Cutter Head Cleaning and Maintenance
Cutter head features
Caution: Never take o spring on head,otherwise they probably go wrong
because the spring can not revert to the original state.
Please take o cutter blades after using clippers. Clean o scrappy hair on
cutter head surface and in between blade niches,so as to avoid inuencing
their sharpness.
Clean cutter head with water,have to make it dry,otherwise they get rusty.
After each cleaning,please drop lubricating oil to maintain the clipper.
Kind Attentions
Cutter head lubrication
Front view
Left
view
Under blades
Upper blades
Blade lifetime has something to do with running frequency,hair quality and
maintenance.
Replace worn cutter heads to avoid hair clamping.For any replacement
part,kindly consult our agencies and repair service centers.Never t other maker
cutter heads on our clippers.
During using the clipper,you know the cutter head may get a little warm. It’s
quite normal and it doesn’t inuence proper use.
Kind Attentions