Lift Tech Marine ShoreMaster User manual

Always Lower The Boat Lift Before Attempting Assembly.
ShoreMaster 5000 Lbs. Installation Guide
Tools required: Crescent Wrench, 9/16 Wrench, Regular and Phillips Screwdriver.
1. Lower the Boat Lift.
2. Remove the Wheel.
4. Remove the Brake Lever and Brass
Washer.
You Will Not use the pieces
above any longer.
3. Remove the Top Cover.
5. Install Top Cover and Fiber Disc.

In case of a Power Outage, this Tool may be Inserted
into a Drill to Raise or Lower your Lift.
Recommended Extension Cords up to 150 feet 12/3.
Any question regarding Electrical current requirements please call your Authorized
Dealer or Lift Tech Marine 1-866-319-8877.
Caution: All power used on your dock or lift needs to be GFI protected at the shore line.
www.lifttechmarine.com
6. Install the Spline, and the Spacer Collar.
8. Remove the Bottom Right Bolt and
Discard the Bolt. Install the Strap around
the Motor. Install the Bracket onto the Lift
using the Bolt Provided with this Kit.
7. Slide the Motor down onto the Spline.
Install the Bolt and Washer onto the
Motor and Tighten to Approximately 70
Foot Pounds.
9. Tighten the Strap and Bracket Bolts.
Plug in and Enjoy!